Contact Platform Support
Help CenterEMERSON CE3007 / KJ2005X1-BA1 – DeltaV Controller Module for Reliable, Redundant Process Control
Related Products
-
Emerson 1C31179G01 Remote I/O Module – Field I/O Expansion for Ovation DCS, Built for Stable Plant OperationUS$ 216.00MOQ: 1 Blade -
Emerson Ovation 1X00884H01 – Compact Controller Module for Reliable DCS PerformanceUS$ 2216.00MOQ: 1 Blade
-
Emerson 5X00230G01 – DCS I/O Card for Ovation System Upgrades and ReplacementsUS$ 2216.00MOQ: 1 Blade
-
Emerson 5X00059G01 Analog Output Module – Stable AO for Precise 4–20 MA/voltage Control in Ovation DCSUS$ 2216.00MOQ: 1 Blade
-
Emerson 5X00062G01 Analog Output Module – Stable, Configurable AO for Ovation DCS Control LoopsUS$ 2216.00MOQ: 1 Blade
Warranty: 365 days
Delivery Time: 1 week if in stock; no more than one month at the latest
Payment: 50% advance payment; full payment before delivery
Express Options: FedEx, UPS, DHL
One thing I appreciate is how predictable the lead time is on this model—typically, spares ship quickly so you can plan a clean window for switchover or hot-standby installation.
Key FeaturesDeltaV Control Execution – Runs control logic, manages scan cycles, and coordinates I/O updates for stable process performance.
Redundancy-Ready – Designed for simplex or redundant pairing, so you can switch to hot-standby with minimal downtime.
Deterministic Networking – Dual Ethernet ports for the DeltaV control network; typically supports 10/100Base‑TX with robust recovery behavior.
Seamless I/O Integration – Works with DeltaV I/O families (AI/AO/DI/DO, FOUNDATION Fieldbus, Profibus DP, and others via appropriate modules) for flexible architectures.
Tight System Compatibility – Native fit in the DeltaV controller carrier; minimal setup when replacing like-for-like modules.
Lifecycle-Friendly – Firmware upgradable; in many cases can be commissioned with existing system versions following Emerson guidelines.
| Brand / Model | EMERSON DeltaV – CE3007 / KJ2005X1-BA1 (Controller Module) |
| HS Code | 8537.10 (Programmable controllers) |
| Power Requirements | Supplied via DeltaV backplane; typically 24 VDC nominal (from the carrier power system) |
| Operating Temperature | 0 to 50°C typical (indoor, control cabinet environment) |
| Signal I/O Types | No direct I/O on the controller; supports AI/AO/DI/DO and fieldbus via DeltaV I/O subsystems |
| Communication Interfaces | Dual 10/100Base‑TX Ethernet ports for DeltaV control network (redundancy supported) |
| Installation Method | Plug-in module on DeltaV controller carrier; DIN‑rail mounted inside a control cabinet |
| Dimensions & Weight | Controller footprint uses a 2‑wide slot on the DeltaV carrier; typical depth compact for cabinet mounting; weight typically |
| Redundancy | Supports redundant pair configuration (primary/standby) |
This controller is widely used in continuous and batch plants where deterministic control and easy maintenance matter:
Oil & Gas (wellhead, gathering, separation, compression)
Chemicals & Petrochemicals (reactors, distillation, utilities)
Pharmaceuticals (batch control, clean utilities, HVAC)
Power & Utilities (boiler auxiliaries, water treatment, balance-of-plant)
Water/Wastewater (process, filtration, disinfection)
Food & Beverage (CIP/SIP, batching, packaging line integration)
A maintenance supervisor told me their team swapped a legacy DeltaV controller with a CE3007 during a two-hour window and were back online without retuning loops—exactly the kind of low-risk changeover plants look for.
Reliability – Mature DeltaV architecture with proven field performance; redundancy minimizes unplanned stops.
Compatibility – Drop-in fit with existing DeltaV carriers and networking; reduces engineering hours during upgrades.
Lifecycle Cost – Stable firmware, long availability, and simple spares strategy help lower total cost of ownership.
Supportability – Works with standard Emerson tools and diagnostic workflows; easier training and faster troubleshooting.
Cabinet & Environment – Install in a clean, ventilated control cabinet; follow typical 0–50°C ambient and avoid condensation.
Power & Grounding – Use a stable 24 VDC backplane supply; maintain proper earth grounding to limit noise and surge risk.
Networking – Connect both Ethernet ports to the DeltaV control network (redundant paths recommended); use industrial-rated switches.
Wiring Practices – Keep network and power cabling separated; observe ESD precautions during handling and insertion.
Redundancy Setup – If pairing controllers, match firmware versions and follow DeltaV switchover procedure to avoid bumping loops.
Routine Care – Periodically verify controller status LEDs, back up configuration, review diagnostics, and plan firmware updates during scheduled outages.
Manufacturer certifications typically include CE and UL/CSA for industrial control equipment
Conforms to standard industrial EMC and safety practices for DCS hardware
Warranty (supplier): 365 days
DeltaV controller carrier and power supply (24 VDC backplane)
DeltaV I/O cards (AI/AO/DI/DO) and fieldbus interface modules (FOUNDATION Fieldbus, Profibus DP)
DeltaV Smart Switch or managed industrial Ethernet switches for the control network
Redundant controller pairing (same model) for high availability
If you’re replacing an existing DeltaV controller, you might notice commissioning is straightforward—most of the work is just disciplined backup/restore and a quick health check on the network. That’s why this part tends to be a safe choice for both emergency spares and planned migrations.
Send Inquiry to This Supplier
You May Also Like
-
Emerson 5X00106G01 – Programmable Logic Controller Module for Ovation/WDPF DCS RacksUS$ 2216.00MOQ: 1 Blade
-
Emerson 5X00208G01 Controller Module – Reliable CPU Module for Ovation DCS RacksUS$ 2216.00MOQ: 1 Blade
-
Emerson 5X00167G01 – 8‑Channel Analog Output Module for Precise Control in Ovation DCSUS$ 2216.00MOQ: 1 Blade
-
Emerson 5X00225G01 Counter Module – High‑speed Pulse and Frequency Input for Ovation DCSUS$ 2216.00MOQ: 1 Blade
-
Emerson 5X00226G04 Controller Module – Reliable Ovation DCS Control for Critical ProcessesUS$ 2216.00MOQ: 1 Blade
-
Emerson 5X00241G01 Processor Module – Reliable CPU Board for Ovation DCS Controller RacksUS$ 2216.00MOQ: 1 Blade
-
Emerson 5X00228G01 DCS I/O Module – Field Signal Interface for Emerson Ovation RacksUS$ 2216.00MOQ: 1 Blade
-
Emerson 5X00273G01 Input Module – Reliable Analog Signal Acquisition for Ovation RacksUS$ 2216.00MOQ: 1 Blade
-
Emerson 5X00281G01 Power Module – Stable Backplane Power for Ovation DCS CabinetsUS$ 2216.00MOQ: 1 Blade
-
Emerson 5X00300G01 Analog Input Card – Reliable Signal Acquisition for Ovation DCSUS$ 2216.00MOQ: 1 Blade
