Contact Platform Support
Help CenterBently Nevada 3500/15-05-00-00 Power Supply – Core AC Module for 3500 Series Racks
Related Products
-
BENTLY NEVADA 125744-01 – 3500 Series Module for Vibration Monitoring and Machine ProtectionUS$ 4216.00MOQ: 1 Blade -
Bently Nevada 125696-01 4-Channel Relay Module – Trusted Alarm and Trip Outputs for 3500 Machinery Protection RacksUS$ 4216.00MOQ: 1 Blade
-
Bently Nevada 125792-01 Enhanced Keyphasor Module – Reliable 1/rev Phase Reference for Turbomachinery MonitoringUS$ 4216.00MOQ: 1 Blade
-
Bently Nevada 129489-01 AC Power Module – Stable Rack Power for 3500 Condition Monitoring SystemsUS$ 4216.00MOQ: 1 Blade
-
Bently Nevada 133292-01 Low Voltage DC Power Module – Reliable LVDC Power for 3500 System RacksUS$ 4216.00MOQ: 1 Blade
Warranty: 365 days
Lead time: 1 week if in stock; no more than 1 month at the latest
Payment: 50% advance payment; full payment prior to delivery
Express options: FedEx, UPS, DHL
High‑voltage AC input (-05 option) – Typically supports wide‑range 175–264 Vac, 47–63 Hz, suitable for most 200–240 Vac plants.
Redundant-ready design – Two supplies can be installed; if one fails, the other continues powering the rack without process interruption.
Rack-integrated power rails – Distributes regulated DC to all 3500 Series modules; no external I/O wiring on the PSU itself.
Status indication – Front LEDs provide quick visual checks for power health and module OK status.
Field serviceability – In a redundant configuration, the module can typically be replaced online to minimize downtime.
Designed for continuous operation – Stable output under typical vibration cabinet environments found in turbines, compressors, and critical rotating assets.
| Brand / Model | Bently Nevada 3500/15-05-00-00 (3500 Series Power Supply) |
| HS Code (reference) | 9032.90 – Parts and accessories of automatic regulating or controlling instruments (final classification may vary by destination) |
| Power Requirements | Input: typically 175–264 Vac, 47–63 Hz (variant “-05”); supports dual-supply redundancy within the 3500 rack |
| Dimensions & Weight | Approx. 241 mm (H) × 24 mm (W) × 203 mm (D); ~0.7 kg (typical rack module form factor) |
| Operating Temperature | 0 to +65 °C typical rack ambient (non‑condensing) |
| Signal I/O Types | No process signal I/O; provides internal DC bus power; front LEDs for status indication |
| Communication Interfaces | None on PSU; system communications handled by modules such as 3500/22M |
| Installation Method | Plug‑in module for 3500 rack power position; supports primary + redundant configuration |
Deployed across turbine generator sets, compressors, pumps, and critical fans in power generation, oil & gas, petrochemical, steel, and pulp & paper. In many cases, plants choose the -05 version when 200–240 Vac panel power is standard, simplifying wiring and spares. A typical case: a combined‑cycle plant upgraded to redundant 3500/15 supplies to support 24/7 monitoring during peak season, avoiding planned outages for single‑point failures.
Reliability under load – Stable power rails for vibration/condition monitoring modules help prevent nuisance trips and data dropouts.
Compatibility – Native fit for the 3500 Series rack; works with common monitors like 3500/40M, 3500/42M, 3500/25, and the 3500/22M interface.
Redundancy option – Dual supplies reduce unplanned downtime and, in many cases, enable hot‑swap replacement.
Cost control – Standardized AC input (-05) often lets sites use existing 230 Vac feeds without auxiliary converters.
Supportability – Straightforward module replacement; easy spares strategy across multiple racks.
Cabinet & environment – Install in a 3500 rack inside a clean, ventilated control cabinet. Maintain adequate airflow and avoid high dust or corrosive atmospheres.
Wiring – Use appropriately rated mains wiring for the AC input. Bond protective earth reliably to reduce electrical noise and ensure safety.
Redundancy best practice – For hot‑swap capability, fit two supplies and verify the healthy status of both before planned replacement.
Routine checks – Visually inspect front LEDs during rounds; verify rack input voltage and grounding periodically. Clean intake areas gently to prevent blockage.
Firmware/records – While the PSU itself is not typically firmware‑driven, keep rack and monitor module firmware records up to date for system consistency.
Safety – Isolate power and follow site LOTO procedures before single‑supply replacement. Only qualified personnel should service the rack.
The 3500 platform is widely recognized for industrial reliability. Certifications commonly associated with Bently Nevada 3500 Series components include CE and UL/cUL; CSA is also seen on many builds. RoHS status can vary by production date and region, so it’s worth confirming against your exact serial. Manufacturer warranty practices typically apply when sourced through authorized channels; we extend a 365‑day warranty on supply.
Related/Supporting Components (for planning)3500/05 System Rack (19-inch)
3500/22M Transient Data Interface (TDI)
3500/40M Proximitor/Seismic Monitor, 3500/42M Proximitor/Seismic Monitor
3500/25 Keyphasor Module
3500/32M Relay Module
Send Inquiry to This Supplier
You May Also Like
-
Bently Nevada 133819-02 Velocity Seismic Probe – Case‑Mounted Velocity Sensor for Reliable Machine Vibration MonitoringUS$ 4216.00MOQ: 1 Blade
-
Bently Nevada 135489-03 Communication Gateway Module for 3500 Series – Turning 3500 Data Into DCS/PLC InsightsUS$ 4216.00MOQ: 1 Blade
-
Bently Nevada 135031-01 Rack Interface I/O Module – Reliable Rack Communications for 3500 Series Protection SystemsUS$ 4216.00MOQ: 1 Blade
-
Bently Nevada 136711-01 Temperature Monitoring I/O Module for 3500 Series – Rear I/O for 3500/60 Temperature MonitorUS$ 4216.00MOQ: 1 Blade
-
BENTLY NEVADA 136719-01 – Temperature Monitor Module for 3500 Series Machinery ProtectionUS$ 4216.00MOQ: 1 Blade
-
BENTLY Nevada 140734-05 Dynamic Pressure Monitoring Module – Continuous Combustion and Pulsation Insight for Critical Rotating AssetsUS$ 4216.00MOQ: 1 Blade
-
Bently Nevada 176449-08 Piston Rod Position Monitor – Reliable Rod Motion Tracking for Reciprocating CompressorsUS$ 6216.00MOQ: 1 Blade
-
Bently Nevada 140734-01 – Four‑Channel Proximity Probe Monitor for 3500 Series Machinery ProtectionUS$ 2216.00MOQ: 1 Blade
-
Bently Nevada 184826-01 VGA Display Module – Real-time Rack Visualization for 3500 SystemsUS$ 2216.00MOQ: 1 Blade
-
Bently Nevada 190782-01 Communication Gateway Module – Reliable Modbus/Ethernet Bridge for 3500 Monitoring SystemsUS$ 2216.00MOQ: 1 Blade
