Contact Platform Support
Help CenterABB UNS0881a-P;V1 (3BHB006338R0001) – Control/Interface Board for ABB Industrial Drives
Related Products
-
ABB UNITROL 1020 – Digital AVR for Reliable Synchronous Generator ExcitationUS$ 3906.00MOQ: 1 Unit -
ABB PPD113B01-20-111000 – Rack I/O Signal Interface Module for ABB Control SystemsUS$ 11950.00MOQ: 1 Pallet
-
ABB XVC770BE102 (3BHE021083R0102) – Excitation Control Board for UNITROL SystemsUS$ 4200.00MOQ: 1 Pallet
-
ABB PU519 (3BSE018681R1) – System Module for ABB Control/800xA Platforms, Built for Reliable Cabinet IntegrationUS$ 6100.00MOQ: 1 Unit
-
ABB UNS4681V511 – Control System Module for Reliable DCS/PLC Maintenance and UpgradesUS$ 3865.00MOQ: 1 Pallet
Warranty: 365 days
Delivery time: 1 week if in stock; no more than one month at the latest
Payment: 50% advance; full payment prior to delivery
Express options: FedEx, UPS, DHL
Each unit is ESD-packed and visually inspected prior to dispatch
Original ABB spare – Ensures mechanical fit, connector alignment, and firmware/revision consistency in ABB drive systems.
UNS0881a-P;V1 hardware revision – Stable hardware version favored in many installed bases for maintenance standardization.
Host-powered board – Draws regulated logic power from the drive backplane; no external PSU needed.
Low-voltage control & signal conditioning – Designed for reliable internal signaling and inter-board communication inside the drive.
Service-friendly replacement – Board-level swap that, in most cases, restores control functionality without cabinet rewiring.
ESD-robust handling – Conformal/board protection practices from ABB manufacturing; ship-ready in anti-static packaging.
| Brand / Model | ABB UNS0881a-P;V1 |
| Manufacturer Part No. | 3BHB006338R0001 |
| HS Code | 8538.90 (Parts suitable for the apparatus of heading 8537) |
| Product Type | Drive control/interface PCB (internal to ABB industrial drives) |
| Power Requirements | Powered by host drive backplane (logic-level rails; no separate supply) |
| Operating Temperature | Follows host drive specification; typically 0 to +55 °C environment inside cabinet |
| Signal I/O Types | Low-voltage digital/analog control signals and inter-board links (as per drive configuration) |
| Communication Interfaces | Proprietary board-to-board/backplane connectors used within ABB drive control sections |
| Installation Method | Internal mounting in drive cabinet; secured with screws/standoffs; ESD-safe handling required |
You’ll typically find the UNS0881a-P;V1 inside ABB variable-speed drive systems used across:
Metals and mining – mill drives, conveyors, and crushers where uptime is critical
Cement and aggregates – kiln fans, baghouse blowers, raw mill drives
Pulp & paper – line drives, winders, and section controls
Power & utilities – auxiliary drives in balance-of-plant systems
Marine & offshore – pump and winch drive cabinets
Water & wastewater – aeration blowers and high-efficiency pumping
One thing I appreciate is how it slots into existing ABB drive architectures without forcing field rewiring—handy for midnight callouts when the line has to be running before shift change.
Reliability – Genuine ABB board designed for continuous operation in control compartments.
Compatibility – Matches the mechanical layout and backplane interfaces used in many ABB drive frames.
Downtime reduction – Quick board swap in most cases; no re-engineering required.
Lifecycle support – Easier spare planning when standardizing on the V1 hardware revision.
Total cost control – Avoids expensive cabinet modifications and shortens maintenance windows.
A maintenance supervisor at a cement plant told us their team keeps one UNS0881a-P;V1 on-hand per line. When a control fault pops up, swapping this board has, in many cases, brought the drive back within an hour—no waiting for a specialized service call.
Installation & MaintenanceEnvironment – Install inside a clean, ventilated cabinet per ABB drive guidelines; avoid conductive dust and moisture.
ESD safety – Use a grounded wrist strap and ESD mat; handle by edges only.
Wiring – Power and signals are via backplane/board connectors; seat fully and verify latch engagement.
Firmware/parameters – Back up the drive’s parameters before replacement; restore and verify checksums after swap.
Routine care – Periodic cabinet cleaning with dry air (low pressure); check connector integrity during scheduled shutdowns.
Documentation – Follow the specific ABB drive service manual for slot position, torque specs, and revision notes.
Manufactured under ABB quality systems (ISO 9001)
CE marking applies at the drive/system level
RoHS compliance depends on production batch/revision; many later revisions are compliant
Warranty: 12 months (365 days) from shipment
Tip: If your current board shows a different minor revision, share the exact part label and drive typeplate. We can verify interchangeability, so you avoid compatibility surprises during the change-out.
Send Inquiry to This Supplier
You May Also Like
-
ABB PPD113B03-19-150000 – OEM Control Module for ABB Industrial Drive/Excitation SystemsUS$ 12388.00MOQ: 1 Unit
-
ABB REF615C_E HCFEAEAGABC2BAA11E – Feeder Protection Relay for MV Distribution Control and IEC 61850 AutomationUS$ 2960.00MOQ: 1 Unit
-
ABB UNS0881b-PV2 PCB – Original Replacement Board for ABB DCS/Advant CabinetsUS$ 3699.00MOQ: 1 Pallet
-
GATE DRIVER PCB (GRD) HIEE401782R0001, LT C391 AE01 LTC391AE01US$ 4600.00MOQ: 1 Pallet
-
ABB SPIET800 Ethernet CIU – Compact Ethernet Communication Interface for 800xA / Symphony Plus SystemsUS$ 13666.00MOQ: 1 Unit
-
ABB S-123H 3BHB030479R0512 – Drive Control/Gate Interface Board for ABB Industrial DrivesUS$ 3556.00MOQ: 1 Pallet
-
ABB PVD164A2059 (3BHE014340R2059) – Phase/Voltage Detection and Drive Interface Board for ABB Industrial DrivesUS$ 3764.00MOQ: 1 Unit
-
ABB PPC322BE01 (HIEE300900R0001) – Processor Module for Advant DCS Nodes and Legacy System UpkeepUS$ 13891.00MOQ: 1 Pallet
-
ABB UCD224A103 (3BHE023681R0103) – Industrial Drive Control Board for ABB Drive and Power Electronics SystemsUS$ 6500.00MOQ: 1 Pallet
-
ABB UFC721AE 3BHB002916R0001 – Control Board Module for ABB Drive SystemsUS$ 2300.00MOQ: 1 Pallet
