Contact Platform Support
Help CenterABB XVC768116 (3BHB007211R116) Drive Control Board – Reliable Spare for ABB Industrial Drives
Related Products
-
ABB PM573-ETH (1SAP130300R0271) – Ethernet CPU for AC500 PLC SystemsUS$ 4335.00MOQ: 1 Pallet -
ABB PM861AK01 (3BSE018157R1) – AC 800M CPU Module for Robust System 800xA ControlUS$ 4585.00MOQ: 1 Pallet
-
ABB S-053H 3BHB012897R0007 – Drive Control/Interface Board for ABB Industrial DrivesUS$ 169450.00MOQ: 1 Set
-
ABB PPC380AE02 (HIEE300885R0102) – High-reliability CPU Module for Advant/OCS Controller SystemsUS$ 4861.00MOQ: 1 Pallet
-
ABB PPC902AE101 (3BHE010751R0101) – Processor Board for High‑Reliability Control SystemsUS$ 1390.00MOQ: 1 Unit
Warranty: 365 days
Lead time: 1 week if in stock; no more than one month at the latest
Payment: 50% advance payment; full payment before delivery
Express options: FedEx, UPS, DHL
Genuine ABB spare – Matches the original board footprint and connectors to minimize downtime.
Revision R116 variant – Helps align firmware and hardware compatibility in existing drive frames.
Backplane-powered – No external power supply required; the host drive provides regulated rails.
Internal signaling only – Designed for the drive’s internal buses and logic; no field I/O on the board.
Service-friendly design – Plug-in module with guided mounting and screw points to reduce installation errors.
High reliability build – In many cases, boards like this use conformal coating and robust PCB materials for cabinet environments.
| Brand / Model | ABB XVC768116 – Part No. 3BHB007211R116 (Rev. R116) |
| HS Code | 8504.90 (Parts of static converters) |
| Power Requirements | Powered via host drive backplane; no external supply (typically 5 VDC/24 VDC rails provided by the drive) |
| Dimensions & Weight | Board-level plug-in module; compact footprint suitable for standard ABB drive cabinets |
| Operating Temperature | Typically 0 to +55°C when installed inside a ventilated cabinet; storage commonly −25 to +70°C |
| Signal I/O Types | Internal digital/analog signaling via edge/backplane connectors; no direct field wiring terminals |
| Communication Interfaces | Internal system bus connectors; interface is defined by the host drive platform |
| Installation Method | Plug-in PCB; fixed with screws/standoffs in the designated slot; ESD-safe handling required |
| Compatibility | Intended as a service replacement for ABB industrial drives; match by exact part number/revision |
Maintenance teams typically deploy this board in ABB drive cabinets across metals processing, paper, mining & minerals, marine, cranes, test stands, and oil & gas handling lines. It’s a practical choice when a drive trips due to an internal control fault and you need a fast, like-for-like replacement to stabilize production.
A plant engineer told us that swapping this module during a planned stop kept their winder line from slipping another week in schedule—no rework of field wiring, just a clean board change and a quick functional test.
Reduced downtime – Drop-in form factor means faster turnaround during shutdowns.
Compatibility confidence – Matching 3BHB007211R116 revision helps avoid firmware mismatch issues.
Lifecycle support – Suitable for installed bases where extending the life of ABB drives is cost-effective versus full replacement.
Quality assurance – Each unit is handled with ESD and packing standards that, in many cases, exceed typical warehouse practice.
Straightforward logistics – Predictable lead times and express shipping to get lines running again sooner.
Environment – Install inside an IEC-compliant cabinet with proper ventilation; keep ambient within the host drive specification.
ESD safety – Wear a grounded wrist strap; handle by edges; avoid touching components or connector pins.
Mounting – Power down, wait for DC bus discharge, remove the old board, seat the new board on guides, and secure screws/standoffs evenly.
Connections – Reconnect backplane and ribbon connectors carefully; verify that keyed connectors are fully seated.
Commissioning – Confirm firmware/revision alignment if applicable, restore or verify parameters, and run a controlled test at low load.
Routine care – Keep the cabinet clean and dry; periodic dust removal with dry air; check fans/filters; firmware maintenance as per ABB guidance.
Manufacturing standards – Produced under ISO 9001 quality systems.
Regulatory alignment – Used within CE/UL certified ABB drive systems; RoHS compliant in most cases.
Warranty – 365-day warranty coverage.
From my perspective, the safest path is to match your existing label exactly: XVC768116 / 3BHB007211R116 (R116). If you share a cabinet photo or the drive’s nameplate, we can double-check revision compatibility before shipment so what arrives is exactly what your maintenance plan expects.
Send Inquiry to This Supplier
You May Also Like
-
ABB UAD215A104 (3BHE026284R0104) – Excitation Control Board for UNITROL SystemsUS$ 2778.00MOQ: 1 Unit
-
ABB PPE091A101 (3BHE044481R0101) – High‑reliability Control Board for ABB Excitation and Industrial Automation RacksUS$ 1640.00MOQ: 1 Pallet
-
ABB REF615C_E HCFFAEAGANB2BAA11E – Feeder Protection & Control Relay for Medium-Voltage DistributionUS$ 2972.00MOQ: 1 Unit
-
ABB PFXA401SF (3BSE024388R4) – PROFIBUS DP Single‑Mode Fiber Link Adapter for Long‑Distance, Noise‑Immune FieldbusUS$ 2300.00MOQ: 1 Pallet
-
ABB SM811K01 (3BSE018173R1) – Single‑Mode Fiber CEX‑Bus Extension Module for AC 800M / S800 I/OUS$ 5445.00MOQ: 1 Unit
-
ABB PPD113B01-26-111001 – Plug‑in Industrial Control Module for ABB System RacksUS$ 12901.00MOQ: 1 Unit
-
ABB UFD128A101 (3BHE012049R0101) – Control Interface Board for ABB Industrial Drive CabinetsUS$ 14689.00MOQ: 1 Unit
-
ABB UAD215A105 (3BHE026284R0105) – Control I/O Board for ABB Excitation and High‑Power Drive SystemsUS$ 3974.00MOQ: 1 Pallet
-
ABB PPD113B01-25-111001 – Operator Panel for Local Drive/DCS Parameterization and MonitoringUS$ 11279.00MOQ: 1 Pallet
-
ABB XVC768115 (3BHB007211R115) – Control Board for ACS800 Drive SystemsUS$ 320.00MOQ: 1 Pallet
