ASTM A276 A479 316 304 309 310S 317L 304 Stainless Steel Round Bar

317L Stainless Steel Description

    The 317L (00Cr19Ni13Mo3, SUS317L) stainless steel is a molybdenum-based austenitic stainless steel. It has stronger chemical resistance than conventional chromium-nickel austenitic stainless steels such as 304 alloy. In addition, the 317L stainless steel has higher ductility, stress corrosion resistance, compressive strength and high temperature resistance than conventional stainless steel. It is a low carbon grade or an L grade which has anti-sensitization properties during welding and during heat treatment. 317L stainless steel has good seawater resistance and SCC resistance compared to 316L. It is used in chemical vessels, chemical products such as Reactor, which require high corrosion resistance.

Why choose us?
     Our company established in 2004.More than 10 years of development,we become the leader in north China market in metal material products.We have more than 1000 tons of perennial stock.
What is our customer base?
     Our customers are located in more than 80 countries and regions around the world,especially in the Middle East,Southeast Asia,South America,North America,Australia,Eastern Europe,Nordic has long-term stability of customers.
What is our advantage?
     We have high quality products and professional services. Our products after SGS,BV,ISO certification. Our salesman has more than five years of experience.
What is the delivery time?
   If we have stock, usually the delivery time is about 10-20 working days. If your products need to be produced, the delivery time is about 30 working days or 45 working days, or according to the factory arrangement.
Will stainless steel rust? 
The answer is yes, so rusty stainless steel how to deal with it?
     First of all from the reasons for rusty stainless steel. When the stainless steel surface of the passive film corrosion resistance in the weak part of the formation of pitting due to self-induced reaction, and then the formation of small holes, slowly with chloride ions close to the final formation of a highly corrosive liquid, More speed up the corrosion rate of stainless steel. There is also a reason for the corrosion of cracks between the crystal within the stainless steel, which destroyed the stainless steel surface of the passivation film. Therefore, the surface of stainless steel must always be cleaned and maintained, so as to extend its service life. However, when cleaning the surface of stainless steel should pay attention to: stainless steel surface can not scratch the phenomenon; can not use with bleach ingredients and abrasive cleaning solution, if the use of washing liquid, must be used after the end of clean water rinse.
1.When the stainless steel surface is grease, oil pollution, you can use a soft cloth to wipe clean, and then use a neutral detergent or ammonia solution cleaning.
2.When the stainless steel surface appears rainbow pattern, because too much use of detergent or oil caused by washing with warm water neutral detergent can be cleaned.
3.When the stainless steel surface is dusty or easy to go out of the dirt, you can use soap, weak detergent or ask to rinse. Trademarks on the surface of stainless steel, when washed with warm water or weak detergents, the adhesive ingredients should be rinsed with alcohol or organic solvents.
4.When the stainless steel surface rust occurs, you can use 10% nitric acid or grinding detergent cleaning, you can also use a special detergent cleaning. Therefore, if you want to keep the bright stainless steel, clean the surface, while extending its life, the above must be done!