Induction hand dryer factory wholesale

characteristic

1. A unique high-speed hand dryer with a wind speed of up to 100 meters per second.

2. The 160mm long air outlet can fully and thoroughly dry hands.

3. Equipped with a built-in PTC heater, the air temperature is gentle and provides great care.

4. Equipped with a detachable water receiving tank, easy to clean and prevent water droplets from splashing and contaminating the ground.

5. The unique windproof strip design can reduce the noise blown out from the air outlet.

6. The filter screen of the air intake is easy to disassemble and clean.

7. The simple and clear thin appearance design takes up less space.

8. The fastest drying time is 5-7 seconds, saving time and electricity.

9. Noise below 52db, quiet and environmentally friendly.

10. Stylish and elegant appearance.

Four major advantages:

Efficient and energy-saving

High speed airflow jet technology can quickly dry hands in 10 seconds, consuming only 1/18 of the power of traditional hand dryers

Cost saving and durable

The service life is up to 5-7 years, which is 2-3 times that of traditional models

Antibacterial and environmentally friendly

Made of sterile materials with a high antibacterial layer, reducing the use of paper and paper abuse, providing great support for environmental protection

sanitary

Fully automatic contactless hand dryer to prevent secondary pollution, using a unique sewage box design to prevent water droplets from falling to the ground, ensuring absolute cleanliness of the site

Self protection system

Overcurrent protection - When the current is too high, the machine automatically stops working and resumes operation after the fault is resolved.

Overheating protection - If critical components malfunction in high temperature environments, the machine will stop working and resume operation after troubleshooting.

Short circuit protection - the control system stops working when the motor is short circuited.

Motor anti blocking protection - If the motor or fan cannot operate normally due to foreign objects, the control system will stop working until the foreign objects are removed.