Small Flow Basin Sensing Faucet Copper

Water saving: Water comes as soon as you reach out your hand, and stops as soon as you collect it, which is particularly water-saving.

Hygiene: The water switch is fully automated by a sensor, eliminating the need for hand contact with the faucet and effectively preventing cross infection.

Intelligence: The machine is controlled by a microcomputer chip and can automatically set the sensing range according to the appearance and shape of the basin. In addition, it has a one minute timeout water stop function to avoid wasting water resources due to foreign objects staying within the sensing range for a long time.

Power supply: AC/DC automatic switching. When using 4 No. 5 salt batteries for DC products, if used 100 times a day, there is no need to replace the batteries for two years.

Easy maintenance: The external device has a water quality filtration mechanism to prevent impurities from entering the solenoid valve in the water pipe, and it is easy to clean

Function of induction faucet:

Induction faucets do not require direct human contact and can effectively prevent cross infection; The function of reaching for water and turning off when leaving effectively saves water by more than 30%, especially suitable for areas with severe water shortage in China. At present, induction faucets are widely used in public places with high pedestrian traffic, such as train stations, bus stations, airports, etc.

H-B202 stainless steel induction faucet

Power supply: DC6V or AC220V

Static power consumption: ≤ 0.5mW (AC6V)

≤ 3W (DC220V)

Sensing range: 8CM-20CM automatic distance measurement

Applicable water pressure: 0.02-0.8Mpa

Design water pressure: 0.1-0.3Mpa.

Operating environment temperature: 1-55 ℃

Inlet and outlet pipe diameter: G (1/2) "(DN15)

function characteristics

Infrared sensing, automatic water discharge and shut-off, water-saving, convenient, hygienic, and can effectively avoid cross infection.

2. The host is controlled by a microcomputer and can adjust the sensing distance according to the color and shape of the basin.

3. Specially designed filters can effectively remove particles and impurities such as sand and stones from waterways.

4. When used continuously for more than one minute, the sensor will automatically turn off the water to avoid wasting water resources due to foreign objects staying in the sensing area for a long time.

5. The DC model uses 4 alkaline batteries and is used 300 times a day. No need to replace the battery within two years.

6. The shelf life of this product is one year.