Contact Platform Support
Help CenterNXP Ultraligt Ev1 、ultraligt-c 17pf 50pf Smart Card
Related Products
-
213 215 216 NFC Label Sticker, 144 Byte, 504 Byte, 888 Byte Memory Label, for NFC Enabled Mobile Phones and Devices,NegotiableMOQ: 10 Pieces -
125KHZ/13.56MHZ TK4100、NTAG 213 215 216 Circular/ Square CardNegotiableMOQ: 100 Pieces
-
FM11RF08 NXP M1S50 Standard and Non-standard CardsNegotiableMOQ: 100 Pieces
-
NFC/RFID Double-hole Wristband With Small CardNegotiableMOQ: 100 Pieces
-
LF/HF Inductive Wooden Hotel Door Lock CardNegotiableMOQ: 100 Pieces
Parameters
Basic Parameters
Brand: NXP
Material: Usually PVC
Customization: It can be customized according to specific requirements.
Electrical Parameters
Operating Temperature: Ranging from -20°C to 55°C or -20°C to 70°C.
Operating Frequency: 13.56 MHz.
Communication Rate: 106 KB baud rate.
Data Storage: Data can be stored for 10 years or 2 years, and it can be rewritten up to 1000 times. The storage capacity can be 1024 bits, 384 bits, or 512 bits, which is divided into 16 blocks with 4 bytes per block.
Other Parameters
Unique Serial Number: It has a unique 7 - byte serial number.
Anti - Collision Function: It can handle multiple cards simultaneously, which is very useful in scenarios where multiple cards may be present in the vicinity at the same time.
Read/Write Distance: The read/write distance is within 100 mm, and the actual distance depends on the antenna.
Power Supply: There is no need for an internal power source in the card.
Instructions for Use
Reading Operation
Bring the card close to an induction device that supports reading this type of card, such as an access control card reader or a bus card reader. When the card is within the effective distance (within 100 mm), the device will automatically identify the card information. For example, when entering a residential community, just bring the card close to the access control induction area. The access control system will read the verification information such as the card's serial number, and if the verification is successful, the door will open.
Writing Operation
For the user read/write area (blocks 4 to 15), data can be written through specific writing devices and software. However, there are special regulations for some special areas. For example, part of block 2 can be set as read - only, and page 3 is a one - time programmable area, and the writing operation is irreversible. For instance, if you want to write personal consumption amount information into the card, you need to use a dedicated read/write device and follow the corresponding communication protocol and operation process.
Precautions
The card should be kept away from strong magnetic fields, high temperatures, and humid environments to avoid affecting the card's performance and data storage. For example, do not place the card near high - power electrical appliances with strong magnetic fields such as microwave ovens and induction cookers for a long time.
Application Scenarios
Access Control System
It is widely used in places such as residential communities, office buildings, and hotels. Residents or employees can bring the induction chip card close to the access control card reader. The system will verify the card's legitimacy and then open the access control, which greatly facilitates the management of personnel entry and exit. For example, a residential community uses this card as an access control card. Homeowners can enter the community by swiping the card, which improves the security and management efficiency of the community.
Campus Management
It can be used as a campus card for students, which can be used for entering and exiting the campus and dormitories, as well as for dining in the cafeteria and borrowing books from the library. When students have meals in the cafeteria, they just need to place the card on the card reader, and the fee will be deducted automatically, realizing multi - function use of a single card on campus.
Public Transportation
It is used in public transportation such as buses and subways. Passengers can pay the fare by swiping the card, which improves the boarding efficiency. For example, on some bus routes in certain cities, passengers can use this induction chip card to pay for their rides without having to prepare cash or change.
Send Inquiry to This Supplier
You May Also Like
-
Mobile Phone Anti-magnetic StickerNegotiableMOQ: 100 Pieces
-
Double-hole Wristband CardNegotiableMOQ: 100 Pieces
-
Standard and Non-standard Cards( FM1208-9/10 NXP M1S50 S70 Ultraligt EV1 Ultraligt-C NTAG213/215/216 I CODE DesFire )NegotiableMOQ: 100 Pieces
-
NTAG 213 215 216 Currency Card (or Bring 3M Adhesive)NegotiableMOQ: 100 Pieces
-
125KHZ Smart Card(TK4100 EM4200 EM4305 EM4450 T5577 HITAG 1 HITAG 2 HITAG S 256 HITAG S 2048)NegotiableMOQ: 100 Pieces
-
Double-hole Wristband With Card(FM11RF08 FM1208-9/10 M1S50 S70 Ultraligt NTAG213 215 216 I CODE)NegotiableMOQ: 100 Pieces
-
Double-hole Wristband With Card(TK4100 EM4200 FM11RF08 M1S50 Ultraligt NTAG213 215 216 I CODE)NegotiableMOQ: 100 Pieces
-
Standard and Non-standard Cards( FM11RF08 FM1208-9/10 NXP M1S50 S70 Ultraligt EV1 Ultraligt-C NTAG213/215/216 I CODE DesFire )NegotiableMOQ: 100 Pieces
-
Smart Cards( FM11RF08 FM1208-9/10 NXP M1S50 S70 Ultraligt EV1 Ultraligt-C NTAG213/215/216 I CODE DesFire )NegotiableMOQ: 100 Pieces
-
RFID Ultra High Frequency Card(NXP Ucode8 Ucode9 Alien H8 H9)NegotiableMOQ: 100 Pieces
