Contact Platform Support
Help CenterChildren's Furniture Formaldehyde Testing Chamber
Related Products
-
Soft Furniture Formaldehyde Testing ChamberUS$ 6250 - 12500MOQ: 1 Set -
Carpet Floor Formaldehyde Test ChamberUS$ 6000 - 12500MOQ: 1 Set
-
Intelligent Light IncubatorUS$ 1050 - 3899MOQ: 1 Set
-
Waterproof Constant Temperature and Humidity IncubatorUS$ 1050 - 3899MOQ: 1 Set
-
Double Door Artificial Climate IncubatorUS$ 1500 - 4000MOQ: 1 Set
Machine Introduction:it is used to test formaldehyde emission ofvarious wood-based panel,composite wood flooring,carpet,carpetpadding,and other interior decoration materials,also other buildingmaterials under constant temperature humidity.
TEST STANDARDS
ASTM D6007—14《Standard Test Method for Determining Formaldehyde Concentrations in Air from Wood Products Using a Small-Scale Chamber》
EN 717-1 Wood-Based Panels Determination of Formaldehyde Release-Part 1：Formaldehyde Emission by the Chamber Method.
FEATURES
1. Box inner chamber is made of stainless steel, the surface is smooth and no condensation, adsorption formaldehyde, guarantee the accuracy. The thermostat box is made of hard foaming material. The door is sealed with silicone rubber, and it’s good thermal insulation performance and sealing performance. Box is equipped with forced air circulation device (it’s form the circulating air flow), to ensure the consistent temperature and humidity balance of the main structure in the cabinet: The inner tank is a mirror stainless steel test tank., the outer for insulation casing, compact, clean, efficient, energy saving, not only reduces the energy consumption and reduce the time of the balance of the equipment.
2. Using a 7 inch touch screen as personnel operating equipment dialogue interface, intuitive and convenient. Directly to set up and display the temperature in the cabinet, relative humidity, temperature compensation, compensation, dew point deviation, dew point temperature deviation, adopts imported sensors, and can automatically record and control curve drawing. Special control configuration software, the realization of system control, program setting, dynamic data display and historical data playback, fault recording, alarm Settings, and other functions.
3. It adopts industrial module and imported programmable controller, good operation stability and reliability, It can ensure the trouble-free operation for a long time and improve the service life of equipment, also reducing the operation cost of the equipment. And breakdown self check and prompt functions. It is convenient for users understanding the running situation of equipment, maintenance is simple and convenient.
4. The control program and operation interface are in accordance with the relevant test standard optimization design and simplely convenient operation.
5. It changed the existing reciprocating humidify the fog, dew point method is used to humidify, make the casing humidity change smoothly, thus greatly improve the accuracy of moisture control.
6. It adopted the imported film platinum resistor as temperature sensor, high precision, stable performance.。
7. With advanced technology in the heat exchanger and high thermal efficiency, reduce the temperature gradient。
8. The compressor, such as temperature and humidity sensor, controller, relay device and so on, these spare parts adopted imported components。
9. Protection device: climate, water tank has high and low temperature dew point alarm protection with high and low water level alarm protective measures.
10.Integration of the whole machine structure is compact; Installation, debugging and use is very simple.
SPECIFICATION
| Mode | DR-H601 |
| Dimensian | 1630*1200*1850mm |
| Inner volume | 1.0±0.02m |
| Temp.range | 10-40℃,accuracy:±0.5℃,Resolution:0.1℃,Adjustable |
| Humid,fange | 30-80%,accuracy:±3%,Resolution:0.1%,Adjustable |
| Leakproofness | 1KPa relative pressure,leakage rateand export air differ |
| Background levels | ormaldehyde≤0.006mg/m³ |
| Air flow | 0.5-2.0m/s,accuracy;±0.05m/s,Adjustable |
| Working time | not less than 40 days |
| Air replacement rate | 0.1-1.5cycle/h,accuracy:±5%,Continuously adjustable Constant (1±0.05)cycle/h |
| Gas sample | Pumping range:0.1~2.5L/min,Sampling accuracy±5%, equips sample holder |
The Formaldehyde Testing Chamber for Children's Furniture is a specialized device used to measure the formaldehyde emission levels in children's furniture. Since the materials used in children's furniture directly impact children's health, formaldehyde, a common indoor pollutant, can harm children's respiratory and immune systems. Therefore, testing the formaldehyde content in furniture is crucial.
Main Functions and Features of the Children's Furniture Formaldehyde Testing Chamber:Simulating Real-World Usage Conditions:
The formaldehyde testing chamber can simulate the conditions in which children's furniture is used in indoor environments. It controls factors such as temperature and humidity to realistically replicate formaldehyde emission, ensuring the accuracy and reliability of the test results.
Precise Control of Temperature and Humidity:
The chamber is typically equipped with a high-precision temperature and humidity control system, with temperatures usually set between 20°C and 30°C, and humidity between 50% and 80%. These standards comply with both domestic and international testing regulations, ensuring that formaldehyde emission tests meet regulatory requirements.
Real-Time Formaldehyde Concentration Detection:
The testing chamber is equipped with a formaldehyde concentration sensor, which can monitor the formaldehyde levels in the air in real-time and record the data. The device typically generates formaldehyde concentration curves and reports automatically, ensuring the accuracy and traceability of the test data.
Automated Testing and Data Recording:
The testing process is typically automated, with the ability to control the testing cycle and save the results as data logs. The device also supports data export functionality for further analysis and report generation.
Compliance with National and International Standards:
The formaldehyde testing chamber is designed to meet standards such as GB/T 14677-2008 (Method for Determining Formaldehyde Emission from Indoor Decoration Materials) and other international testing criteria. The test results are authoritative and reliable, ensuring compliance with relevant product certifications.
Adjustable Testing Period:
The testing period is usually 24 hours, 48 hours, or 72 hours, and users can adjust the testing time based on their needs to obtain formaldehyde emission levels at different time intervals.
Safety Design:
The formaldehyde testing chamber is typically equipped with multiple safety features, including high-temperature protection, leak protection, and more, ensuring the safety of the device during operation.
Children's Furniture Product Testing:
Furniture manufacturers can use the formaldehyde testing chamber to test the formaldehyde emission levels of children's furniture, ensuring that the furniture does not pose a health risk to children during use. This is an essential test before the product enters the market to ensure compliance with national and industry safety standards.
Quality Control and Certification:
Furniture manufacturers can use the formaldehyde testing chamber for quality control, ensuring that their produced furniture meets environmental requirements. The test results are essential for obtaining relevant certifications, such as environmental labels.
Indoor Air Quality Monitoring:
In certain children's activity areas (such as nurseries, children's rooms, etc.), formaldehyde testing chambers can be used to test furniture for formaldehyde emissions, ensuring that indoor air quality meets standards and protecting children from formaldehyde pollution.
Environmental and Research Institutions:
Environmental and research institutions use the equipment to study formaldehyde emission characteristics, analyzing the formaldehyde release properties under various materials and environmental conditions to promote the development and application of more environmentally friendly materials for children's furniture.
Consumer Testing and Quality Assurance:
Consumers purchasing children's furniture can use the formaldehyde testing chamber to provide formaldehyde emission test reports, ensuring the environmental safety of the product and increasing consumer trust in the product.
Send Inquiry to This Supplier
You May Also Like
-
Simulated Natural Climate Artificial Climate IncubatorUS$ 1500 - 4000MOQ: 1 Set
-
Meet UL Standard Ventilated Aging Test ChamberUS$ 6250 - 12500MOQ: 1 Set
-
Plastic Material Testing Ventilation Aging Test ChamberUS$ 3250 - 7000MOQ: 1 Set
-
Customizable Inner Chamber Size, Ventilated Aging Test ChamberUS$ 3250 - 7000MOQ: 1 Set
-
Ventilation Aging Test Box for Wire and Cable TestingUS$ 3250 - 7000MOQ: 1 Set
-
Special Ozone Aging Test Chamber for Automotive TiresUS$ 4280 - 8870MOQ: 1 Set
-
Intelligent Ozone Concentration Control Aging Test ChamberUS$ 4280 - 8870MOQ: 1 Set
-
Test Box for Anti Ozone Aging Performance of Plastic FilmUS$ 4280 - 8870MOQ: 1 Set
-
Ozone Aging Test Chamber for Safety Door Lock DeviceUS$ 4280 - 8870MOQ: 1 Set
-
Intelligent Temperature Control System High and Low Temperature Tensile Testing MachineUS$ 6000 - 20000MOQ: 1 Set
