High-Performance CO2 Wear-Resistant Welding Wires for Roller Press Machines

WD161

2.4 2.8 3.2

58-65

C:3.0-5.0 Cr:22-27

Used for wear plate single layer hardfacing, hardness is up to HRC60 after welding.

WD261

2.4 2.8 3.2

57-63

C:3.0-5.0 Cr:22-27

Used for wear plate double layer hardfacing, hardness is above HRC60 after welding,good impact resistance and not easy to fall off.

WD361

2.4 2.8 3.2

57-63

C:3.0-5.0 Cr:24-30

Used for wear plate multi-layer hardfacing, hardness is above HRC60 after welding,good impact resistance and not easy to fall off.

WD181

2.4 2.8 3.2

58-65

C:3.0-5.0 Cr:22-27

Used for thin sheet welding, hardness up to HRC60 after welding, control overlay thickness below 3mm to ensure good wear resistance.

WD161H

2.4 2.8 3.2

58-65

C:3.0-5.0 Cr:25-32

Overlay has high chromium content after welding, good wear resistance. Used for wear plate single layer hardfacing.

Products

Details

Wear plate welding wire

Single-layer hardfacing welding wire, double-layer hardfacing welding wire and multi-layer hardfacing wire

Welding wire for repairing

Coal grinding roller hardfacing welding wire; cement Vertical mill hardfacing welding wire; Squeeze roller hardfacing welding wire; Repairing welding wire for steel slag grinding roller; Repairing welding wire for star wheel and other repairing welding wire

Gas shielding welding wire

All kinds of gas shielding repairing welding wires (repair all kinds of wear resistant parts), heat resistant welding wire, grate bar and single tooth roller repairing welding wire, impact resistant welding wire and various welding wires containing special elements (which can be customized as required)

Instruction

1.      Smooth wire feeding, stable arc, uniform diameter

2.      Less spatter and smoke during welding, above 90% hardfacing efficiency

3.      Every drum (spool) packed with one whole PC of welding wires, without any joint, no broken arc phenomena during the welding to improve production efficiency

4.      Developing more than 100 kinds of flux cored wear resistant welding wire suited to metal wear resistant field which can satisfy the wear resistant requirements of many wear resistant parts under all kinds of working conditions

5.      The base metal and the wear resistant overlay are metallurgical bonding; After welding, the wear resistant layer doesn't fall off because of uniform stress relief.

We can provide qualification certificate, product data sheet, test report including chemical composition, hardness, etc of wear resistant overlay