Contact Platform Support
Help CenterDry Condenser Wall Bushing
Related Products
-
Condenser Bushing for Wall ApplicationUS$ 500 - 3000MOQ: 1 Piece -
FCRG Dry Capacitive Wall BushingUS$ 1000 - 2000MOQ: 1 Piece
-
Condenser Transformer BushingUS$ 500 - 2000MOQ: 1 Piece
-
RIF Transformer BushingUS$ 500 - 3000MOQ: 1 Piece
-
RIF Capacitive Transformer BushingUS$ 1000 - 2000MOQ: 1 Piece
Dry type composite condenser wall bushing is an independently developed and innovated product in China. The main insulation inside the bushing is divided into composite film capacitive insulation and resin impregnated fiber capacitive insulation. The main insulation outside is divided into high temperature vulcanized composite rubber and porcelain. which can meet the needs of different users.
The product is composed of main components such as current carrier, condenser core, outer sheath, shed, flange, end structure and so on. There is a measuring tap on the flange. When partial discharge and dielectric loss factor are measured, it is turned on and used. It should be reliably grounded during normal operation. The two ends of the product are the cable clamps.
Standard: IEC 60137, GB/T4109
Send Inquiry to This Supplier
You May Also Like
-
Composite Wall Bushing Insulators/JDB Bushing/JDB BushesUS$ 0.1 - 10MOQ: 500 Pieces
-
Wall Bushing High Voltage Wall BushingUS$ 25 - 1,000MOQ: 1 Piece
-
Wall BushingUS$ 0.05 - 0.1MOQ: 10000 Pieces
-
Wall BushingUS$ 33 - 35MOQ: 100 Pieces
-
Wall Bushing InsulatorNegotiableMOQ: 3 Pieces
-
12kv 400A Wall Bushing Porcelain BushingUS$ 50 - 200MOQ: 1000 Pieces
-
Metric Threaded Bushings Through Wall Bushing High Temperature BushingUS$ 0.01 - 0.5MOQ: 1000 Pieces
-
Hitachi Excavator Pin and Bushing Rubber Shock Absorber Bushes Wall BushingUS$ 10 - 50MOQ: 1 Piece
-
Hitachi Excavator Pin and Bushing Rubber Shock Absorber Bushes Wall BushingUS$ 10 - 50MOQ: 1 Set
-
Transformer Bushing, Wall Bushing, Silicone Rubber Bushing, 12kv, 24kv, 36kvNegotiableMOQ: 1
