Contact Platform Support
Help CenterFully Welded Structure Industrial Depth Filtration Sintered Stainless Steel Filter Element RT-035
Related Products
-
Long Life Stainless Steel Sintered Mesh Filter Element RT-054US$ 14 - 140MOQ: 1 Piece -
Small Conical Stainless Steel Sintered Mesh Pleated Filter Cartridge RT-055US$ 9.9 - 190MOQ: 1 Piece
-
Wire Wound Stainless Steel Sintered Mesh Pleated Filter Candle RT-056US$ 9.9 - 190MOQ: 1 Piece
-
Stainless Steel Cleanable Wire Mesh Pleated Filter Cartridge RT-057US$ 19.9 - 190.9MOQ: 1 Piece
-
SUS316 WIRE MESH CANDLE FILTER WITH PROTECTION SLEEVE PREPOLYMER MELT RT-058US$ 19.9 - 190.9MOQ: 1 Piece
In sintered mesh, five layers are the standard number of layers of sintered mesh. Those with more than five layers are called multi-layer sintered mesh. Therefore, five-layer sintered mesh is also called standard five-layer or standard sintered mesh. The following will introduce the structure, characteristics, materials, and sizes of five-layer sintered mesh.
The structural context of the five-layer sintered mesh, from top to bottom, the first layer is the protective layer, the second layer is the filter layer, also called the control layer, the third layer is the separation layer, and the fourth and fifth layers are both support layers, also called skeleton layers or reinforcement layers.
The five-layer sintered mesh has the following characteristics
1. High selectivity of filtration accuracy, 1-200μm is possible.
2. There is a protective layer on the top and a support layer on the bottom. The mesh stability of the filter layer is high, which fully guarantees the filtration effect.
3. Surface filtration, easy to backwash.
4. High temperature and corrosion resistance.
5. Easy to process to meet different working conditions in different industries. In general industries, five-layer sintered mesh made of 304 or 316L stainless steel can already meet the basic needs of users; in some special industries, sintered mesh made of Hastelloy, Monel or Inconel may be used. The standard sizes of five-layer sintered mesh are 500×1000㎜, 600×1200㎜, 1000×1000mm, 1200×1200mm, 1500×1200mm, and other sizes can be customized according to needs.
When choosing a sintered mesh filter element, the quality of the sintered mesh filter element can be judged according to the following aspects
1. Material: A good sintered mesh filter element usually uses high-quality metal materials to make the filter element have good corrosion resistance and wear resistance
2. Air permeability: A filter element with good air permeability can ensure the smooth passage of fluid and improve the filtration efficiency.
3. Strength: The filter element should have sufficient strength to withstand the pressure and impact during work.
4. Appearance: Check whether the surface of the filter element is flat and flawless, whether the mesh is uniform, etc. Different application scenarios may have different requirements for the quality of the filter element, and you can choose according to actual needs.
| Difference | Sintered mesh filter element | Sintered felt filter element |
| Material | Cleaning cycle | Metal fibers of different wire diameters |
| Process | Produced at 1260℃ | Produced at 1180°C |
| Structure | Multi-layer wire mesh composite with uniform filter aperture | With multiple gradient pore size layers, it has a greater dirt holding capacity |
| Blind hole rate | Basically no blind holes | More or less blind holes |
| Filter accuracy | 1-300um | 2-60um |
| Cleaning cycle | Both are materials that can be reused after cleaning, but sintered felt has a larger dirt holding capacity and a longer cleaning cycle. | |
Technical parameters:
Working pressure: ≤31.7Mpa
Working temperature: ≤300℃
Medium viscosity: ≤260Pa▪s
Allowable pressure difference: ≤10Mpa
| Breathability | Porosity | Pollution holding capacity | thickness | Breaking strength | |||||
| L/(min.dm2) | (%) | (mg/cm2) | (mm) | (MPa) | |||||
| Basic Value | Deviation | Basic Value | Deviation | Basic Value | Deviation | Basic Value | Deviation | Basic Value | Deviation |
| 47 | 10% | 75 | 10% | 5 | 10% | 0.3 | 10% | 32 | 10% |
| 63 | 76 | 6.5 | 0.3 | 36 | |||||
| 105 | 75 | 7.8 | 0.37 | 32 | |||||
| 205 | 79 | 8.6 | 0.4 | 23 | |||||
| 280 | 80 | 15.5 | 0.48 | 23 | |||||
| 355 | 80 | 19 | 0.62 | 20 | |||||
| 520 | 80 | 26 | 0.63 | 23 | |||||
| 670 | 78 | 29 | 0.68 | 26 | |||||
| 1300 | 85 | 36 | 0.62 | 28 | |||||
Send Inquiry to This Supplier
You May Also Like
-
SUS316 Stainless Steel Melt Filter Core RT-059US$ 19.9 - 190.9MOQ: 1 Piece
-
High DHC Metallic Mesh Pleated Melt Filter Core RT-060US$ 19.9 - 190.9MOQ: 1 Piece
-
Methanol SUS316 Pleated Filter Elements RT-061US$ 19.9 - 190.9MOQ: 1 Piece
-
Melt Process Metallic Filter Element RT-063US$ 19.9 - 190.9MOQ: 1 Piece
-
40 Inches SUS 304316 Mesh Pleated Elements for Polyester Melt Filtration RT-064US$ 19.9 - 190.9MOQ: 1 Piece
-
Petrochemical Industry Stainless Steel Sintered Felt Pleated Filter ElementUS$ 19.9 - 190.9MOQ: 1 Piece
-
RT-066 Factory Price OEM 304316 Stainless Steel Pleated Filter Cartridge SS Filter ElementUS$ 19.9 - 190.9MOQ: 1 Piece
-
RT-067 Stainless Stell 316L Filter CartridgeUS$ 19.9 - 190.9MOQ: 1 Piece
-
RT-068 Methanol Fluid Filtration Micro Sintered Metal Filter ElementsUS$ 19.9 - 190.9MOQ: 1 Piece
-
RT-070 222 Connection Stainless Steel Metal Mesh Sintered Pleated Filter ElementUS$ 19.9 - 190.9MOQ: 1 Piece
