Contact Platform Support
Help CenterCold Rolled Inconel 625 Coil AISI ASTM Nickel Chromium Alloys
Related Products
-
Dental Sintering Furnace With High Quality / Dental Lab FurnaceUS$ 4285 - 4500MOQ: 10 Pieces -
Integrated Furnace Design Muffle FurnaceUS$ 4285 - 4500MOQ: 10 Pieces
-
Atmosphere Furnace With Explosion Proof Safety ProvisionsUS$ 4285 - 4500MOQ: 10 Pieces
-
High Accuracy Thermocouple Vacuum FurnaceUS$ 4285 - 4500MOQ: 10 Pieces
-
Laboratory Tubular Resistance Furnace 1300US$ 4285 - 4500MOQ: 10 Pieces
Alloy 625 is face-centered cubic lattice structure. Dissolve out the carbon granule and instability quaternary phase, then change it to stability Ni3 (Nb,Ti) trimetric lattice around 650°C after a long time heat preservation. nickel-chromium content will strength the mechanical performance in the state solution while suppress the plasticity.
625 Inconel 625 High Temperature Alloy, 625 Inconel 625 High Temperature Alloy, 625
Product specification range: diameter 6-500mm, length 0.5-30m; Product specification range: thickness 0.5-80mm, length 1-6m, width 0.5-3m Product specification range: outer diameter 6-530mm, wall thickness 0.5-50mm, length 1-12m.
Essential details:
Alloy 625 is an austenitic nickelchromium-molybdenum-niobium alloy possessing a rare combination of outstanding corrosion resistance coupled with high strength from cryogenic temperatures to 1800°F (982°C).
The strength of Alloy 625 is derived from the solid-solution hardening of the nickel-chromium matrix by the presence of molybdenum and niobium. Therefore, precipitation-hardening treatments are not required.
The chemical composition of Alloy 625 is also responsible for its outstanding corrosion resistance in a variety of severe operating environments along with resistance to oxidation and carburization in high temperature service. The alloy is resistant to pitting, crevice corrosion, impingement corrosion, intergranular attack and is almost immune to chloride stress corrosion cracking. Alloy 625 can be easily welded and processed by standard shop fabrication practices.
Inconel 625 Strip Specification
Item |
Size |
Plate/Sheet |
0.5~60.0mm (THK)*2000mm(WIDTH)*6000mm(LENGTH) |
Bar (Round) |
Φ5.5~250mm |
Bar (Square) |
40~240mm*40~240mm |
Strip |
0.05~3.0mm (THK)*≤420mm(WIDTH) |
Seamless Pipe |
0.2mm~508mm (OD)*0.5mm~18mm(WT) |
Welded Tube |
0.5mm~120mm (OD)*0.05mm~10mm(WT) |
Wire |
Φ0.1mm~18mm |
Parameters
Item |
Chemical Composition (%) |
||||||||
Inconel 600 |
C |
Mn |
Si |
S |
Cr |
Ni |
Fe |
Cu |
|
≤0.15 |
≤1.0 |
≤0.5 |
≤0.015 |
14.0~17.0 |
≥72.0 |
6.0~10.0 |
≤0.5 |
||
Standard | |||||||||
Sheet/Plate |
Round bar/Wire |
Pipe |
Tube |
||||||
ASME SB-168 |
ASME SB-166 |
ASME SB-163 |
ASME SB-516 |
||||||
Send Inquiry to This Supplier
You May Also Like
-
Trolley-Type Resistance Furnace 900-1200US$ 4285 - 4500MOQ: 10 Pieces
-
Fast Temperature Rise And Fall Speed High-temperature Lifting FurnaceUS$ 4285 - 4500MOQ: 10 Pieces
-
1800 Polycrystalline Alumina Fiberboard High Temperature Mesh Belt FurnaceUS$ 4285 - 4500MOQ: 10 Pieces
-
High-power SPK-Silicon Nitride Ceramic IgniterUS$ 10 - 50MOQ: 10 Pieces
-
280~350W SPK2 - Silicon Carbide Ceramic IgniterUS$ 10 - 50MOQ: 10 Pieces
-
Fast Temperature Rise And Fall Speed High-temperature Lifting FurnaceUS$ 4285 - 4500MOQ: 10 Pieces
-
Car Ceramic Glow Plugs SPK3 - Silicon Nitride Ceramic Glow Plug LgniterUS$ 10 - 50MOQ: 10 Pieces
-
Copper and Stainless Steel Heating Tubes 220V,380V/1200w,1500,3000wUS$ 10 - 50MOQ: 10 Pieces
-
Double U Shaped Heating Tube 1KW/3KW/5KW/10KW/CustomizableUS$ 10 - 50MOQ: 10 Pieces
-
High Thermal Efficiency The Spiral Heating TubeUS$ 10 - 50MOQ: 10 Pieces
