Low-voltage Products XM Lighting Distribution Box

Low-voltage products XM lighting distribution box:

XM lighting distribution box is suitable for single-phase, three-wire or three-phase five-wire end circuit with rated voltage of 220 or 380V and total current of single row load not more than 250A, as the control and distribution of electrical equipment, the protection of overload, short circuit, leakage and overvoltage of the line, which belongs to non-professionals and does not need to be maintained.

The bottom box of the distribution box is made of high-quality cold-rolled steel plate with plastic spraying treatment on the surface. It has the characteristics of no deformation, no oxidation, corrosion resistance, etc., and there are open and dark packing methods to choose from.

Product features:

This product is made of δ=1.2mm steel plate bent and welded, and the installation method is divided into two kinds: wall hanging open installation and wall embedded hidden installation;

Box design will be live parts safe cover, switch handle exposed box cover, can be operated outside the box, open the box cover can be repaired, the box cover is also equipped with a small door;

The distribution box is equipped with a neutral wire terminal (or copper bar) and a ground protection wire terminal (or copper bar) corresponding to the output loop.

The box inlet and outlet cable holes are knocked out holes, distributed at the upper and lower ends of the box, or long waist-shaped holes can be opened according to user requirements and sealed with a cover plate;

The size of the wall hanging open-mounted box is basically the same as that of the wall-mounted dark-mounted box, but the difference is that the size of the dark-packed panel is slightly larger than that of the open-packed panel;

The metering meter is installed in a separate space, the metering room door is opened with an observation window and installed with lead seal, the incoming switch is placed in the left chamber, the outgoing switch is placed in the lower right chamber, and the incoming and outgoing lines are convenient;

Lighting distribution box is a combination of micro switch and power dark socket, mainly to 86×86 mm unit of electrical components for assembly, can be arbitrarily assembled, easy to disassemble, interchangeability, easy to choose.