Customized Modification of 915 Triangular Track Chassis

matters needing attention

Improper driving methods are the main factor causing damage to the rubber track chassis. Therefore, to protect the rubber track and extend its service life, users are advised to pay attention to the following when using the machine:

(1) Overloading walking is prohibited. Overloading walking will increase the tension of the rubber track, accelerate the wear of the core iron, and in severe cases, it may cause the core iron to break and the steel wire curtain to break.

(2) Do not make sharp turns while walking. Sharp turns can easily cause wheel detachment and damage to the track, and can also cause the guide wheel or anti detachment guide rail to collide with the core iron, causing the core iron to fall off.

(3) It is prohibited to climb stairs forcefully, as this can cause cracks at the base of the pattern and, in severe cases, cause the steel wire curtain to break.

(4) It is prohibited to rub and walk on the edge of the steps, otherwise it will cause interference with the body after the edge of the track is rolled up, resulting in scratches and cuts on the edge of the track.

(5) Prohibiting bridge walking is one of the main reasons for pattern damage and core iron breakage.

(6) It is prohibited to walk on slopes at an angle, as this may cause damage to the track wheels due to derailment.