Contact Platform Support
Help CenterHarvester Modification Track Chassis Mud Anti Sinking and Anti Slip
Related Products
-
Tractor Modified Semi Tracked ChassisUS$ 2800 - 28000MOQ: 1 Pair -
Modification of Anti Sinking and Anti Slip Half Chain Rails for Combine HarvestersUS$ 2800 - 28000MOQ: 1 Pair
-
Converting a Combine Harvester to a Track Chassis That Does Not Sink in Mud, Preventing Vehicle SlipUS$ 2800 - 28000MOQ: 1 Pair
-
Renovation of Triangle Track Wheel Anti Sinking Track Chassis for Large HarvesterUS$ 2800 - 28000MOQ: 1 Pair
-
Retrofitting the Track Chassis of a Combine Harvester to Prevent SlippingUS$ 2800 - 28000MOQ: 1 Pair
Turn on the engine water tank drain switch, drain the water, inject an appropriate amount of clean engine oil into the cylinder, and rotate the flywheel several times. Is there any looseness or damage to the parts. Loose parts should be tightened, damaged parts should be replaced, repaired, and maintained after use
Clean up any accumulated material on the surface. Weeds, straw, dust, and oil on the cutting platform, bridge, granary, and external parts of the engine should be cleaned thoroughly. Remove the upper, lower, and tail screens from the sieve box, clean the bottom shell of the sieve chamber and the weeds and dust inside the sieve box, rinse them with tap water, dry them, and then drive them into the hangar.
Remove all triangular tape, wipe it clean, tie a label, hang it on the wall inside the hangar, remove the chain, clean it in diesel, apply engine oil or butter, and store it in a ventilated and dry place.
Add grease to each transmission bearing, and apply engine oil or grease to the friction parts such as the reel, agitator telescopic rod sleeve, tensioning screw, etc. to prevent rust. For rusted exposed parts and areas where paint has been worn off, rust should be removed and repainted
Send Inquiry to This Supplier
You May Also Like
-
Tractor Modification With Track Chassis, Anti-skid and Anti Sinking Measures in Muddy and Swampy AreasUS$ 2800 - 28000MOQ: 1 Pair
-
New Holland Harvester Equipped With Rubber Half Tracks, the New Favorite of Harvesting in the International MarketUS$ 2800 - 28000MOQ: 1 Pair
-
Overseas Farmers Are All Competing! Large Harvester Tractor Modified With Rubber Half Track, Harvesting and Transportation Fully CompletedUS$ 2800 - 28000MOQ: 1 Pair
-
Conquer Muddy Farmland Worldwide! Large Harvester Tractor Modified With Rubber Half Track, Anti Slip and Anti Sinking, Selling Well OverseasUS$ 2800 - 28000MOQ: 1 Pair
-
The Trusted Choice for Global Farms! Large Agricultural Machinery Equipped With Rubber Half Tracks, Fearless of Mud, Worry Free ExportUS$ 2800 - 28000MOQ: 1 Pair
-
Sweep Through the Mud! Large Harvester Tractor Modified With Rubber Half Track, Anti Slip and Anti Sinking, Selling Well WorldwideUS$ 2800 - 28000MOQ: 1 Pair
-
Retrofitting of Harvester Track Chassis for Anti Sinking and Anti SlipUS$ 2800 - 28000MOQ: 1 Pair
-
Tractor Modification With Track Chassis, Mud Anti-skid and Anti Sinking MeasuresUS$ 2800 - 28000MOQ: 1 Pair
-
The Anti Sinking Track Chassis of the Harvester Modification is Stable and ReliableUS$ 2800 - 28000MOQ: 1 Pair
-
Tractor Modification With Triangular Track Chassis for Anti-skid and Anti Sinking on Muddy GroundUS$ 2800 - 28000MOQ: 1 Pair
