500L CE Certification Stainless Steel Jacketed Continuous Stirred Tank Cstr Reactor

Mixing tank is the main chemical reaction of the typical production equipment, which is widely used in resins, adhesives, paint, cosmetics, pharmaceutical and other chemical production. To break down or combined the materials through mixing, filling and cooling, to promote the reaction of polymerization. The mixing tank consists of body, gears, mixing devices, heating devices, cooling devices, seal composition and some corresponding auxiliary equipment: distillation column, condenser, water separator, collecting cans, filters etc.

Design capacity 50-30000L(volume in accordance with the requirements of the design)
Reaction temperature room temperature-300ºC
Reaction pressure -0.1~0.6Mpa
Equipment materail  SUS304 stainless steel,SUS321 stainless steel ,SUS316,Q235-B carbon steel
Stirring form --anchor paddle ,block ,ribbon ,turbine tybe,a dispersing disc,modular like,
Heating methods  electric heating ,steam  heating ,heated in water
Heat transfer medium  oil,steam,hot water,electricity and heating
Heat   transfer structure  jacket,outer half -tube,inner coil type

Continuous operation

A CSTR operates continuously with a steady flow of reactants and products. Reactants are continuously fed into the mixing tank, and products are continuously withdrawn, ensuring a continuous reaction process.

Well-mixed conditions

A defining feature of a CSTR is its efficient mixing of reactants. This is achieved through the use of stirring mechanisms or impellers that ensure thorough blending of reactants and uniform distribution of reactant concentrations within the reactor.

Steady-state operation

In a CSTR, the reactor operates under steady-state conditions, meaning that the concentrations of reactants and products reach relatively constant values with time. This allows for a predictable and stable reaction environment, facilitating control and optimization of the reaction.

Residence time

The residence time in a CSTR is the average time a reactant spends within the reactor. It is determined by the volume of the reactor and the flow rate of the reactants. By adjusting the residence time, the reaction rate and extent can be controlled.

Control of reaction conditions

CSTRs offer the ability to control reaction conditions, such as temperature, pressure, and reactant concentrations, by adjusting the feed rates of reactants and the heat transfer to or from the reactor. This control allows for optimization of the reaction rate and selectivity

Options Of Agitator

FAQ 

Q : Can you send the formula for the products we want to make ?
A : Our machines can be used for many kinds of product making ,such as Resin , Paint, Adhesive Cosmetic , Food , Chemicals . There are many kinds of these products , so it's impossible for us to know all the formulas and technologies . We can assist you to find the raw material list you need , and after you place order with us , we can help you to find formula and technology , there will engineers to teach you how to make the product , and the cost will be on your account.  
Q : Do you have machines in stock ?
A : Yes , but just the small-scale machines Machines are different with other products , most of the large-scale machines are designed according to our customers 'requirements different customers have different production requirements , so the technical parameter is different for most machines On the other hands , most of the our machines will cover a large area , so once the machines are finished , we will effect shipment after QC . 
Q : Can you send the detailed drawings of the machine to us before we place order ?
A : We can send you a draft drawing of the machines , and after you place order and pay the deposit , our engineer will design the send you the detailed drawings . Once you confirm without questions , we will put it into production.
Q : Why does it take at least 20 days to finish the machine ?
A : Once receipt the deposit from you , we will design the drawings and make out the list of the materials and accessories for the production . Once the drawings are finished , our workers will start the production , from welding , polishing , assembling debugging , detection and so on . After finish , they need time to check the machines , if found any possible defect parts , they will return to the production until every part is 100% approved.
Q : Can we pay the balance after we receive the machines and test without problem.
A : It's unnessary to worry about the quality of our machines , we are confident in that . After the machine is finished . we can install and test the machine for you ( if you can not come to our factory ,we can record a video and send to you ) . Only after you check without problems , we will effect shipment .