PPC.R22.1N-T-NN-P2-NN-FW Industrial Control Module

Overview of ABB AC800F RLM01 Redundant Link Module (Replacement):

*IP30 protection level, corrugated aluminum reinforced casing, using standard industrial 35mm guide rail installation method

Performance indicators:

Data electrical interface:

*9-pin Sub_ The D-socket connector and pin definition comply with the protocol specifications of Profibus DP

*Supports the Profibus DP bus standard

*Communication speed: 9.6 kBit/s, 19.2 kBit/s, 45.45 kBit/s, 93.75 kBit/s, 187.5 kBit/s, 500 kBit/s, 1.5 MBit/s, 6 MBit/s, and 12 MBit/s

*Equipped with 4000V lightning protection, 1.5A overcurrent protection, and 600W surge protection functions;

*Terminal resistance: This device does not come with a terminal resistance, please connect it externally as needed

Power supply and protection:

*Power supply: Dual power redundant input, DC (9-36) V, typical DC24V, power consumption less than 4W, with DC1500V voltage isolation and reverse protection function, industrial terminal interface

*Relay alarm output: Link fault and power supply fault alarm output, contact capacity: DC48V/1 A, industrial terminal interface

Mechanical characteristics:

*External dimensions: 132mm * 105mm * 52mm

*Shell: I

Features:

*Supports predetermined communication rates in standard specifications

*Support manual setting of all standard rates or rate adaptation for dial switches (all electrical interface rates must be consistent)

*6 dual color LED status indicators, power failure relay output alarm

*Lightning protection for 4000V electrical interface, 1.5 A overcurrent, 600W surge protection. Industrial grade design, EMC testing certification

*DC9-36V wide redundant dual power supply, DC1500V power isolation, reverse protection

The 155M dual optical interface can better support the outstanding advantages of the Profibus DP bus for fiber optic transmission: peer-to-peer transmission, burst data, bus arbitration, etc., while achieving high-speed long-distance transmission, electrical and ground wire isolation, and reducing interference. The product is industrial grade design, IP30 protection level, corrugated aluminum reinforced casing, 35mm rail installation, DC (9-36) V wide power input, and has relay alarm output Advantages such as dual power redundancy and isolation protection.

Contact information: 15359293870

WhatsApp:+86 15359293870

Contact person: KELLY

Email: geabbdcs@gmail.com   386353502@qq.com

Official website:

In programming, a program or subroutine required to complete a certain function; Or refers to an independent program unit that can be processed by compilers, assemblers, etc; Or refers to a part of a large software system.

A module, also known as a component, is a collection of program statements that can be individually named and independently perform certain functions (i.e., a collection of program code and data structures). It has two basic features: external features and internal features. External features refer to the interface between a module and the external environment (i.e. the way other modules or programs call the module, including input and output parameters, referenced global variables) and the functionality of the module; Internal characteristics refer to the characteristics of the internal environment of a module (i.e. the local data and program code of the module).

There are various types of modules, such as unit operation module (heat exchanger, distillation tower, compressor, etc.), calculation method module (accelerated convergence algorithm, optimization algorithm, etc.), physical and chemical properties module (vapor-liquid phase equilibrium calculation, enthalpy calculation, etc.), etc.