ABB 3BSE008538R1 High Voltage Inverter Spare Parts

Product series:

CP800A communication processor module of HPC800

CTB810 HPC800 Comm.Terminal Board, on the left

CTB810A HPC800A Comm.Terminal Board, on the left

CTB811 HPC800 Comm.Terminal Board, on the right

CTB811A HPC800A Comm.Terminal Board, on the right

HPC800 HC800 control processor module

HC800A Control processor module of HPC800

The HPC800ERA has extended redundancy for the HPC800

HPC800K01 HPC800 Controller Kit [Non-Redundant]

HPC800K01A HPC800 controller kit, non-redundant

HPC800K02 HPC800 Controller Kit [Redundancy]

HPC800K02A HPC800 Controller Kit [Redundancy]

MB705 SPCx00 Horizontal base, non-redundant

MB705A SPCx00A Horizontal base, non-redundant

Product Description:

The address setting and configuration code switch is located under the cover

Right side of the house

For diagnosis, see the chapter "Diagnosis and Display".

Operation and error display a total of 17 leds,

See the "Diagnostics and Displays" chapter.

Connection method of detachable screw type terminal block

Power supply terminal, CS31 system bus. 1 x 2.5 mm2 or maximum. 2 x 1.5 mm2

Other terminals are most numerous. 1 x 1.5 mm2

Max. Analog cable length;

Double core shield, cross section > 0.5mm2 100m

Analog value conversion error

(Non-linear, factory calibration and resolution) type. 0.5% at most. 1%

Max. Allowable potential difference

Terminal M(negative value of the supply voltage) and

Terminal AGND(analog input/output negative sign)±1v

Universal reference potential for all analog signals AGND(negative end of analog input and output)

Electrical isolation of analog signals is not (see also Figure 5.4-2).

Binary input technical data (enable the input to be analog output)

The analog output must be enabled by the binary 1 signal (24V) of terminals 25(+) and 26(-).

Signal level 0 signal (-30... + 5v) Voltage output is 0v,

The current output is 0 MA

1 signal (+13... + 30v) analog output is valid for the address setting and configuration of the code switch located under the cover

Right side of the house

For diagnosis, see the chapter "Diagnosis and Display".

Operation and error display a total of 17 leds,

See the "Diagnostics and Displays" chapter.

Connection method of detachable screw type terminal block

Power supply terminal, CS31 system bus. 1 x 2.5 mm2 or maximum. 2 x 1.5 mm2

Other terminals are most numerous. 1 x 1.5 mm2

Max. Analog cable length;

Double core shield, cross section > 0.5mm2 100m

Business scope:

PLC,DCS,PAC, industrial computer, programming control PC, frequency conversion system, servo system, human-machine interface HMI, transmission and sensing system and other accessories supply, low-voltage electrical appliances, electrical connection, panel cabinet, power supply, industrial safety SCADA, automation software, information, industrial Ethernet, fieldbus, field instrumentation, wireless communication, low-voltage inverter, High voltage frequency converter, motion control, mechanical transmission, motor, machine vision, sensor, display control instrument, analytical test instrument.

After-sales service:

1. The key customer base is an important part of the survival and further development of the enterprise. Through the return visit and communication of the key customers, the customer demand is gradually improved and the customer satisfaction is improved

2 Due to human factors (self-disassembly, fall or external impact, etc.), irresistible factors (such as natural disasters, etc.) improper storage (rats, liquid infiltration, etc.) caused by computer failure, not free warranty service.

3 Damage to electronic components such as chips and capacitors due to voltage, or failure or damage caused by use in working environments other than those specified in the product manual (such as excessively low ambient temperature; The environment is too wet or dry; Voltage or current instability, etc.), not free warranty service.