sonic Belt tension meter U-508

Operating instructions 

On a static drive, gently tap the belt between two fixed points using a finger or a small screwdriver 

Simultaneously hold the sensor head a few millimetres from the belt and press the "MEASURE" button 

The display will show the frequency of vibration in Hertz (Hz or N ) 

To repeat the reading, release the button and repeat the process 

It is recommended that several readings are taken to obtain an average value in order to eliminate possible errors due to harmonic interference frequencies

SANKER sonic belt tension meter U-508                                                     Unlike the force deflection method which involves applying force to the belt, the Gates Sonic Tension Meter measures belt tension by analyzing the harmonic characteristics of a vibrating belt. Belts, like strings, vibrate at a particular natural frequency based on mass and span length.

The Sonic Tension Meter can easily be operated by one person for fast, accurate readings on all types of synchronous belt drive systems and V-belt drives. Simply enter belt mass constant, belt width and span length into the meter using the built-in keypad. Next, hold the meter sensor just above the belt and lightly strum belt to make it vibrate. Press “measure” button to obtain the reading as a frequency (as hertz) or as a force (pounds or newton's).

Use the standard cord sensor to reach inside cramped compartments where conventional measurements would be impossible. An optional flexible sensor can be bent and repositioned for convenient, one-hand operation. Use the optional inductive sensor to measure belt tensions in high-noise or windy environments.

Features:

1.Consistent, accurate tension readings every time

2.Compact and light

3.Easy to use

4.LCD screen with back light

5.Output readings measurable in hertz, pounds or newtons

6.Improved frequency range from 10 - 5000 hertz

7.20 memory registers for belt constants