RS485 MODBUS-RTU EV Charging Base Station 0~1000V DC 2 Circuits Measuring LCD Display Energy Meter 0~10V/ 0~20mA Input

Solor PV Power Distribution Monitoring Solution

Practical Application in Solar PV with Energy Storage Inverter

Practical Application in Solar PV with on-grid Inverter

Practical Application in Twin EV Charger

DJSF1352-RNDC Dual-circuits Monitoring DIN Rail Energy Meter

 DJSF1352-RN rail-mounted DC power meter with double DC input channels, designed for telecommunications base stations, DC charging piles, solar photovoltaic and other applications, this series of meters can measure the voltage, current, power and forward and reverse energy and so on in the DC system.The actual use of the site, you can measure the total power, but also measure the energy within a specified period of time. The test results can be used for local display, but also with industrial control equipment, computers to form a measurement and control system. 

The meter can have infrared communication interface and RS-485 communication interface, and supports Modbus-RTU protocol and DLT645-97 (07) protocol at the same time.The meter can have relay alarm output and digital input function;You can set the ratio, alarm, and communication through the meter panel keys according to different requirements.The meter can have event recording of switch (Modbus protocol), programming and event setting records (645 protocol), instantaneous and timing freeze function of data (645 protocol), maximum and minimum value recording function of voltage and current power.

● Measurement: kWh, kVarh, Power, Current, Voltage and etc

● Current Rating: -/75mV (with Shunt); -/4~20mA (with Hall Sensor)

● Voltage Rating: 0~1000V DC

● Application: DC Battery; Charging Pile; Solar PV and etc

● Communication: RS485 (MODBUS-RTU)

● Extra Function: Dual DC Circuits Monitoring; Secondary RS485 (MODBUS-RTU); Built-in Bipolar Power Source (for Hall Sensors); DO/DI Function

● Display: LCD Display

● Dimension: 72*71*87.8mm (L*W*H)

● Installation: 35mm DIN Rail

● Power Supply: 85~265V AC/DC; 24V(±10%) DC; 48V(±10%) DC

● Standard&Certificate: CE