Contact Platform Support
Help CenterThermostatic Stability Climatic Test Chamber 50kg Load Stainless Steel SUS304
Related Products
-
High And Low Temperature Humidity Stability Rain Test Chamber OEMNegotiableMOQ: 1 Bag -
Humidity Rain Spray Test Chamber Automatic Cycling Water SupplyNegotiableMOQ: 1 Bag
-
Intelligent High Precision Test Chamber With Digital Display OEMNegotiableMOQ: 1 Bag
-
Two Zones Air Type Hot And Cold Impact Test Chamber 220VNegotiableMOQ: 1 Bag
-
Constant Temperature Humidity Chamber 50L-1000L Stainless SteelNegotiableMOQ: 1 Bag
Applications
Fast Shipping Thermal Shock Test Chamber,Thermal Chamber,Thermal Shock Chamber have been designed to operate in accordance with reliability programs, quality control, commercial test programs and medical tests. It is used to test the capability of material structure or composite material to withstand the continuous environmental changes between extremely high temperature and low temperature during a short period. It is applicable to metals, plastic, rubber, electronics amongst other materials. The test result can be used as a reference or basis for produce improvement.If you need more models about our test equipment, please reference our chamber-testing（.）com
Programmable Controller:
1. PLC controller for test chamber
2. Step types include: ramp, soak, jump, auto-start, and end
3. RS-232 interface to connect computer for output
| Internal dimension (W*D*H) | 400*500*500mm |
| External dimension (W*D*H) | 600*1080*1380mm |
| Temperature range | -40~+150℃ |
| Temperature fluctuation | ±0.5℃ |
| Temperature uniformity | 2℃ |
| Humidity range | 20~98%RH (Refer Image below) |
| Humidity fluctuation | ±2.5%RH |
| Humidity uniformity | 3%RH |
| Cooling speed | 1℃/min in average (without loading) |
| Heating speed | 3℃/min in average (without loading) |
| Internal chamber material | mirror finished |
| External chamber material | Stainless steel |
| Cooling method | Air cooling |
| Controller |
LCD touch screen, programmable control temperature and humidity Can set different parameter for cyclic test |
| Insulation material | 50mm high density rigid Polyurethane foam |
| Heater | Explosion-proof type SUS#304 stainless steel fins radiator pipe heater |
| Compressor | France Tecumseh compressor |
| Lighting | Heat resistance |
| Temperature sensor | PT-100 dry and wet bulb sensor |
| Observation window | Tempered glass |
| Testing hole | Diameter 50mm, for cable routing |
| Safety protection device |
Protection for leakage Over-temperature Compressor overvoltage and overload Heater short circuit Water shortage |
Test Area & Shelf
● Interior of Chamber is SUS304 stainless steel.
● A stainless steel shelf for placing test specimens
● Standard load of shelf is 50kg
● Normal wire diameter is 50 um.
● Normal width of a gap between wires is 75um.
● Built-in power interface for test specimen
● Test chamber internal illumination
● Vacuum system for specimen
Send Inquiry to This Supplier
You May Also Like
-
Walk In Temperature Humidity Climate Test Chamber Ac380v With Pid Ssr ControlNegotiableMOQ: 1 Bag
-
Stainless Steel Plant # 304 Thermal Shock Test Chamber 380v 60/50hzNegotiableMOQ: 1 Bag
-
ROHS 380V Hot Air Industrial Drying Oven Anti Explosive 3KPaNegotiableMOQ: 1 Bag
-
500L Industrial Electric Oven / Food Hot Air Circulation Tray Drying OvenNegotiableMOQ: 1 Bag
-
High And Low Temperature Cycle Test Chamber Climate Touch ScreenNegotiableMOQ: 1 Bag
-
Low Humidity Drying Walk In Test Chamber SUS304 With PID SSR ControlNegotiableMOQ: 1 Bag
-
Experimental Oven Electric Heating Air Blast Constant Temperature Oven OEMNegotiableMOQ: 1 Bag
-
220V Vacuum Industrial Drying Oven Rustproof With Timing DeviceNegotiableMOQ: 1 Bag
-
Multipurpose Thermal Shock Chamber Test Rustproof With Hanging BasketNegotiableMOQ: 1 Bag
-
Thermal Shock Equipment , 50Hz Laboratory Environmental ChamberNegotiableMOQ: 1 Bag
