Contact Platform Support
Help Center0.7c-1.0c/Min Walk In Environmental Chamber Humidity AC 3 Phase
Related Products
-
Large Space Temperature And Humidity Walk-In Environmental Test ChamberNegotiableMOQ: 1 Bag -
AC380V 50Hz/60Hz Environment Test Chamber US304 Stainless PlateNegotiableMOQ: 1 Bag
-
220V Stability Temperature Test Chambers Waterproof Vertical ControlNegotiableMOQ: 1 Bag
-
Temperature And Humidity Chamber Dustproof Material Test Chamber SUS304NegotiableMOQ: 1 Bag
-
380V Environment Climatic Test Chamber Multifunctional With LCDNegotiableMOQ: 1 Bag
Walk-in laboratory performance and characteristics:
1, with a very wide temperature and humidity control range, can meet the needs of users. The unique balanced temperature and humidity control method can obtain a safe and accurate temperature and humidity environment. With stable and balanced heating and humidification performance, high precision, high stability of temperature and humidity control.
2, equipped with high precision intelligent temperature regulator, temperature and humidity by LED digital display mode. Temperature and humidity recorder is optional.
3, automatic selection of refrigeration circuit, automatic control device with the temperature of the set value of automatic selection of refrigeration circuit performance, to achieve high temperature state directly start the refrigerator, direct cooling.
4. The inner door is equipped with a large observation window, which can facilitate the observation of the test state of the sample.
5, equipped with advanced safety, protection device - leakage circuit breaker, overtemperature protector, lack of phase protector, water protector.If you need more models about our test equipment, please reference our chamber-testing（.）com
High and low temperature test chamber, constant temperature and humidity laboratory, high and low temperature humidity and heat laboratory, high and low temperature alternating humidity and heat laboratory, salt spray corrosion laboratory, the above laboratory can be customized according to customer requirements.
Main feature of the Walk-in environmental temperature humidity stability chamber:
1. Programmable Controller with RS232C, 7″ LCD touch panel control
2. Stainess steel Interior, galvanized steel sheet exterior
3. 2pcs stainless steel loading shelves free
4. Multipane viewing window with heater
5. 60mm diameter feed-through port
6. Floor stand with castors
| Inner chamber size w×h×d(cm) | Non-standard,depends on customers` specific requirements for customization | |||||
| Exterior chamber size w×h×d(cm) | ||||||
| Testing temperature range | 0℃,-20℃,-40℃,-60℃,+70℃,+80℃ | |||||
| Performance | Temp.fluctuation | ±0.3℃ | ||||
| humidity range | 30~90%RH | |||||
| Humidity uniformity | ±5℃%RH | |||||
| Temp.uniformity | ±3℃ | |||||
| Heat up time | 20℃~80℃≤50min | |||||
| Material | Exterior chamber material | Cold-rolled steel+Powder coating | ||||
| Interior chamber material | SUS#304 Stainless steel plate | |||||
| Insulation material | PU fiberglass wool | |||||
| System | Air circulation system | Cooling fan | ||||
| Heating system | SUS#Stainless steel high-speed heater | |||||
| Humidification system | Surface evaporation system | |||||
| Controlling system | Digital electronic indicator+SSR+PID | |||||
| Refrigeration system |
Imported tecumseh compressor+ fin type evaporator+air(water)condenser |
|||||
| Dehumidifying system | ADP dew point dehumidification method | |||||
| Other components | Multi-layer vacuum glass observation window,cable port(50mm),controlling status indicator lamp,chamber light,specimenloading shelf(2pcs,position adjustable) | |||||
| Safety protection device | Over-heat protection circuit breaker,compressor overload protection,control system overload protection,humidifying system overload protection indicator lamp | |||||
| Power supply | AC 3phase 380V 60/50Hz | |||||
| Customization service | Non-standard or special requirements are all welcome | |||||
Our advantages:
1) Direct factory with 10+ years manufacturing experience in test equipment.
2) Products are in accordance with ASTM, IEC, ISO, JIS and other international standard.
3) Overseas technical and onsite installation support, have been 8 countries, such as America, Turkey, Australia etc.
4) Professional R&D staff with more than 5 years experience in this filed.
Send Inquiry to This Supplier
You May Also Like
-
5KW Humidity Controlled Chamber Rainproof Thermal Shock Test ChamberNegotiableMOQ: 1 Bag
-
1000L Climatic Temperature Test Chambers SUS304 Material CENegotiableMOQ: 1 Bag
-
Programmable Climatic Test Chamber 50HZ For Temperature StabilityNegotiableMOQ: 1 Bag
-
Humidity And Temperature Controlled Chamber 50Hz Climatic Testing ChamberNegotiableMOQ: 1 Bag
-
SUS304 Walk In Test Chamber Programmable With 7″ LCD Touch PanelNegotiableMOQ: 1 Bag
-
Environmental Walk In Test Chamber Multipane SUS304 Stainless SteelNegotiableMOQ: 1 Bag
-
High-Precision Energy-Saving Walk-In Environmental Test ChamberNegotiableMOQ: 1 Bag
-
Waterproof 50Hz Walk In Stability Chamber OEM Programmable Temperature ChamberNegotiableMOQ: 1 Bag
-
60Hz Multipurpose Industrial Drying Oven Antirust Stainless SteelNegotiableMOQ: 1 Bag
-
Customized Walk In Climatic Testing Chamber Environment Testing EquipmentNegotiableMOQ: 1 Bag
