Hengyang Heavy Industry Electric Hydraulic Arm Disk Brake YPZ2 | -560/50 Automatic Compensator

YPZ2 series electric hydraulic disc brake is an advanced product with high performance and multi-function. Due to its advanced functions of automatic equalization of pad setback and automatic compensation of pad wear, it is very convenient to maintain during use. By adding various limit switches, the required interlocking protection signals can be provided to the host PLC. It is very suitable for the deceleration and maintenance (parking) braking of various modern large-scale specialized loading and unloading machinery, lifting and transportation machinery, metallurgical equipment, mining equipment, and engineering machinery.

Main characteristics; 1. The main hinge points are equipped with self-lubricating bearings, which have high transmission efficiency and long service life, and do not require lubrication during use; 2. The interlocking equal back distance device and automatic tile following device can always maintain equal back distance of both sides of the tiles without adjustment, completely avoiding the phenomenon of one side of the brake pad floating against the brake wheel due to uneven back distance; 3. The brake pad is a card mounted integral molding structure, which is very convenient and fast to replace. Attachment 1: Manual release device; 2. Releasing (opening) or closing (closing) limit switch can display whether the brake is normally released or closed; 3. The automatic compensation device for brake pad wear can achieve stepless automatic compensation for pad backoff and braking torque when pad wear occurs; 4. The limit switch for pad wear can achieve signal attention when the brake pad is worn to its limit (note: automatic compensation device must be equipped during application); 5. Using a thruster with a lowering delay valve to drive, the delayed closure of the brake can be achieved.

YPZ2 I, II, and III comply with the German DIN15435 standard; YPZ2 IV, V, and VI comply with the German DIN15435 standard and JB/T7020-2006 standard.

The YPZ2 I, II, and III equal back distance device can always maintain equal back distance between the two sides of the tiles during use; The YPZ2 IV, V, and VI interlocking distance equalization device can always maintain equal distance between the two sides of the pad during use, completely avoiding the phenomenon of one side of the brake pad floating against the brake disc due to uneven distance, and there is no automatic pad following device.

The main swing hinge points are equipped with self-lubricating bearings, which have high transmission efficiency and long service life, and do not require lubrication during use;

The brake spring is arranged in a square spring tube; And there is a brake torque scale on one side, which directly displays the brake torque, making adjustment convenient and intuitive;

The asbestos free brake pad is plug-in type, making it easy and fast to replace;

The automatic compensation device for brake pad wear can maintain a constant distance between the pads and the braking torque during use;

Some additional functions can be achieved by adding additional devices;

Manual release device;

Releasing or closing the limit switch can realize the signal display of whether the brake is normally released or closed;

The brake pad wear limit switch can achieve automatic signal display when the brake pad wear reaches its limit;

The Ed series thruster with a delay valve can achieve delayed closing of the brake and smooth braking.