Contact Platform Support
Help Center3 In 1 Universal IP Test Card For IPhone Android SIM Signal Repair Tool
Related Products
-
NCK Pro Box Flashing Unlocking Tool With 16 Cables For Samsung Huawei RepairUS$ 73 - 74MOQ: 1 Piece -
Original Z3X Pandora Tool Pandora Box For Phone Tablets RepairUS$ 229 - 230MOQ: 1 Piece
-
ICFriend ICS-UFS 3 in 1 Support UFS BGA95/153/254 Set With JTAG Plus BoxUS$ 295 - 296MOQ: 1 Piece
-
OCTOPLUS PRO BOX Activated For SAM LG EMMC/JTAG SE Unlimited FRP HuaweiUS$ 489 - 490MOQ: 1 Piece
-
Used IDCSD UART Cable Type-C Development Cable 2nd Gen For New IPad ProUS$ 22 - 23MOQ: 1 Piece
3 in 1 universal IP test card for iPhone 4-13 Pro Max/iPad SIM card signal test diagnosis. IP universal test card supports almost all GSM cards for signal failure diagnosis.
Features:
1. For iPhone/iPad (cellular version) three-network universality.
2. Mobile card Unicom card Telecom card.
3. Three card slot positions, which can be used to place Nano SIM cards of any operator. The switch is used to switch the working status of three card slots.
4. Three different SIM cards are placed in three card slots.
5. Compatibility: For Apple / iPad Nano-sim card.
6. Preliminary diagnostic signal failure.
Options:
1. First generation for iPhone 4-XS, 13 MINI.
2. Second generation for iPhone XR/XS MAX/11/11 Pro/11 Pro Max/12/12 Pro/12 Pro Max/12 mini/13/13 Pro/13 Pro Max.
How to use IP universal test card:
1. Insert the commonly used three major operators nano sim into the three card slots.
2. Making the front of the slot surface toward you, and insert it horizontally into the SIM cart slot.
3. Swith SIM. Adjust the switch to any of the three ABC gears to be used. The operator to be tested simultaneously pulls out the entire test deck and pushed it in to re-detect the new operator.
4. There is a nano sim card pin test point on the test card deck, which is convenient for repairing the mobile phone without reading the card for quick detection. When testing the signal of SIM card at the test point, it is necessary to turn off the phone and measure the ground resistance. When the phone is turned on, the voltage signal and waveform can be tested.
Send Inquiry to This Supplier
You May Also Like
-
IDCSD 2nd Gen UART Cable Type -C Development Cables For New IPad Pro UsedUS$ 22 - 23MOQ: 1 Piece
-
JCID Intelligent Jailbreak Box J-BOX For Bypass ID and Icloud PasswordUS$ 75 - 76MOQ: 1 Piece
-
DS-809SE EFI Unlocking Tool For MacBook IMac EFI/PIN Code RemovingUS$ 180 - 181MOQ: 1 Piece
-
IRepair BOX P10 For IPhone IPad Read Write SN Wifi DataUS$ 65 - 66MOQ: 1 Piece
-
Arduino Uno Rev3 SMD Microcontroller Development BoardUS$ 39 - 40MOQ: 1 Piece
-
IRepair P10 Engineering Cable Purple Screen Line For IPhone IPadUS$ 4 - 5MOQ: 1 Piece
-
IRepair P10 Engineering Cable for IPhone IPad, Specific IPhone IPad Purple Screen Line for IRepair P10 DFU Box, IRepair P10 Specific Restore Cable. IRepair P10 DFU BOX for Programming IPhone IPad Nand Flash Without Disassembling, IRepair P10 DFU Box ProgrUS$ 6 - 7MOQ: 1 Piece
-
JC B-BOX Window DCSD Cable For IOS A7-A11US$ 71 - 72MOQ: 1 Piece
-
Purple Screen Adapter IPad 2 3 For IRepair P10 Magico Diag ToolUS$ 7 - 8MOQ: 1 Piece
-
New Original Chimera Tool+UART Cable for Chimera DongleUS$ 6 - 7MOQ: 1 Piece
