Home > Products > Lamps SAA Certification and AS/NZS 2293.3 Inspection Report > Lamps SAA Certification and AS/NZS 2293.3 Inspection Report
Lamps SAA Certification and AS/NZS 2293.3 Inspection Report
- 999999 Piece / Pieces per Month
- T/T L/C D/P D/A Credit Card PayPal Cash Escrow Other
- Waterproof bluetooth speaker EU REACH test -REACH SVHC certification inspection
- USB adapters Amazon FCC certification FCC ID registration number
- EU2019/2020 test for the new ERP certification ERP label two-dimensional code
- Wireless ROHS testing & certification
- Speaker bluetooth CE RED certification testing inspection
- Bluetooth BQB certification inspection services
Product Description
1. Does the export of emergency lights to Australia require any certification?
The export of emergency lights to Australia requires SAA certification.
SAA means that electrical products entering the Australian market must comply with local safety regulations, which is the certification frequently faced by the industry. Due to the mutual recognition agreement between Australia and New Zealand, all products certified in Australia can be successfully sold in the New Zealand market. All electrical products should be certified for safety (SAA).
2. What are the test standards for emergency light SAA certification?
AS 2293.3_2005 (Emergency lighting) Australian SAA Certification
SAA standard for emergency lights
The AS/NZS 60598.1
The AS/NZS 60598.2.22
The AS/NZS 61347.2.7
AS/NZS 2293.3 (Emergency Lighting Signs)
AS/NZS 62471 (PhotoBiosafety)
AS/NZS 62493 (Safety from Radiation Exposure to Humans)
AS/NZS 60598-2-22 is a safety requirement for emergency lighting appliances. Compared with conventional safety tests, AS/NZS2. What are the test standards for emergency light SAA certification?
AS 2293.3_2005 (Emergency lighting) Australian SAA Certification
SAA standard for emergency lights
The AS/NZS 60598.1
The AS/NZS 60598.2.22
The AS/NZS 61347.2.7
AS/NZS 2293.3 (Emergency Lighting Signs)
AS/NZS 62471 (PhotoBiosafety)
AS/NZS 62493 (Safety from Radiation Exposure to Humans)
AS/NZS 60598-2-22 is a safety requirement for emergency lighting appliances. Compared with conventional safety tests, AS/NZS 60598-2-22 mainly adds battery safety tests, high temperature resistance tests, optical performance tests and emergency mode switching tests. This is because emergency lights are often used in high-risk work areas or installed as escape indicators. In addition to lighting, emergency lights are endowed with the role of protecting property and life safety. Therefore, there are not only higher requirements in terms of safety, but also a comprehensive consideration of what will happen in the actual work of emergency lights in terms of light efficiency.
3. How to do SAA certification for emergency lights? What is the application process for SAA certification?
Australian SAA Certification Application process:
Step 1: Application
2. Send samples for testing
3. Product rectification (when the test fails)
4. Produce a test report
5. Submit the institutional report for review
6. Issue a certificate
AS 2293.3_2005 (Emergency lighting) Emergency lighting for evacuation of buildings. Emergency lights and exit signs
AS 2293.D temperature test: mainly about high and low temperature battery charging and discharging test, there are time requirements, need to use constant temperature and humidity box, T40~10, two sets of respectively, cycle 1: charging * 72H, discharge completed; cycle 2: charging *16H, complete; cycle 3: charging *16H, complete.
AS 2293. C lamp cold/hot start at 5S and 15S, respectively test the light output that can be lit at this time and the stable output of the whole lamp
Whole Photometry: Note that the test method is different from the previous LM79 (mains vs. emergency mode)
Brightness statistics: Hand-held luminance meter, different shape housing, different colors, should be separated
What information should be prepared for the Australian SAA certification of LED lamps?
Application for SAA certification to series as a unit, need to provide power as the main test model, sample 2-4 sets. Provide circuit schematic diagram, PCB board front and back drawings, BOM, key component list certification, transformer and inductor specifications, model differences, English manual, and electronic signatures.
The applicant shall confirm the completeness of the test product and its normal function. During the test, the applicant manufacturer shall not make any changes that may affect the test and report results. If the test fails, the applicant shall provide a 2-hour free test at the rented site.
Documents required for case opening: 1) Sign and seal the quotation sheet; 2) Sign and seal the application form; 3) Remittance slip; 4) Product specifications.
Shenzhen Licun Testing Co., Ltd. can provide LED lighting enterprises with China energy efficiency label GB30255, GB37478, GB38450 test, salt spray test, wind test, photobiosafety test, IES test, blue light hazard test, SASO2870 test, SASO2902 test, SASO2927 registration, IECEE Certification, CB certification, GS certification, TUV-MARK certification, SAA Certification, CCC certification, CE certification, FCC certification, UL certification, ETL certification, C-tick Certification, ISTMT, TM21, LCP, LM79, LM82, LM84, TM28, D-MARK test, VEET related test report, IPART related test report, RCM certification and other inspection certification
Contact Us
- SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD.
- CPC certification, toy CPSC test report
- Camera-batteries UN38.3 Lithium battery transport certification
- Action cameras Australian RCM registration testing inspection
- Wireless routers Australian RCM registration testing inspection
- Wired earphones TELEC certification inspection, MIC certification
- Wireless routers TELEC certification inspection, MIC certification
- Action cameras EU REACH test -REACH SVHC certification inspection
- Graphics cards EU REACH test -REACH SVHC certification inspection
- Action cameras Amazon FCC certification FCC ID registration number
- Power player FCC certification, testing & inspection services
- Beauty instrument CE RED certification testing inspection
- LED night light EU ErP energy efficiency label
- LED pool light EU ErP energy efficiency label
- Home theater projectors UKCA certification testing & inspection
- Outdoor Bluetooth speakers BQB certification inspection services
- Bluetooth microphones BQB certification inspection services
- Home theater projectors Australian RCM registration testing inspection
- Remote controls Australian RCM registration testing inspection
- Universal remote controls Australian RCM registration testing inspection
- Wireless USB adapters TELEC certification inspection, MIC certification
- Bluetooth receivers TELEC certification inspection, MIC certification
- DAB radios UKCA certification testing & inspection
- Car GPS trackers UKCA certification testing & inspection
- Car FM transmitters UKCA certification testing & inspection
Popular Searches
Find Similar Products By Category
- Business Services > Certification, Inspection & Credit Management > Product Certification
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-