Woodward 8200-507 DVP Digital Valve Positioner IP30

Woodward  8200-507 DVP Digital Valve Positioner IP30

DVP models with IP30 enclosure must be installed into a cabinet with an IP54 or higher rating when used 

in a Zone 2 hazardous location. The end user is responsible for providing a final enclosure that meets the 

requirements of a suitable protection method defined in IEC 60079 series. The IP54 cabinet shall suitable 

for the full ambient temperature rating of the DVP model selected and properly sized, so that after 

installation the maximum surface temperature is less than 115 °C to assure T4 temperature class. 

The DVP shall not be installed in areas exceeding in Pollution Degree 2, as defined in IEC 60664-1. 

The user shall ensure that a minimum clearance of 6.4 mm between live parts and earthed metal is 

maintained. 

Internal batteries located on the Communication Module (models with Ethernet option) are not to be 

charged and are not customer replaceable. 

Transient protection for the DVP is to be provided externally by the end user. The transient protection 

device is to be set at a level not exceeding 140% of the peak rated voltage (150 Vdc). Transient 

protection is not required for equipment marked for 18 Vdc to 32 Vdc.

Mechanical Dimensions:279 x 272 x 145 mm

Note: Due to a lot of product models, please contact us for more detailed . Looking  forward to work with you.