Color coated aluminum coil alloy roofing panel polyester fluorocarbon film processing customized spot inventory to provide color number can be mailed samples

Anticorrosive insulation special coil (insulation aluminum skin) : Material 1060 3003

Thickness 0.3-3.0(mm) Width 1000-1900(mm)

2. Color coated aluminum coil (embossed color coated aluminum coil) : (polyester color coated aluminum coil, fluorocarbon color coated aluminum coil)

Thickness 0.024-1.2(mm) Width 800-1220(mm) Material 1100 1060 3003 5052

3. Aluminum tile for anticorrosion and insulation (corrugated aluminum plate) : Material 1060 3003, thickness 0.3 -- 1.5(mm), aluminum tile type YX35-125-750,YX23-210-840,YX12-100-880,YX14-65-850,YX25-205-820,YX15-225-900

1. Aluminum coil, aluminum skin, insulation aluminum coil: suitable for pipeline insulation, power plant pipeline insulation, chemical plant pipeline insulation. Central air conditioning. Boiler and various insulation, width 1000-1500mm, length: 200-2000 meters. The thickness is between 0.2-1.0mm. Can be divided into 50 meters small roll. Aluminum coil (aluminum skin) series: width of 1000mm, aluminum coil, pipe insulation aluminum skin, chemical plant professional anticorrosive aluminum coil,. Various series of aluminum rolls with common size 1000mm.. (1060) aluminum coil. (3003) alloy aluminum coil. Corrosion resistant aluminum skin.. Suitable for pipe insulation effect.

2. Due to the specific gravity of aluminum skin 2.71. Solve the problem that the weight of aluminum skin per square is very light. The density of iron is 7.8. So each square is 1/3 of iron. It can save raw materials for enterprises. Reduce cost. Insulation aluminum can replace stainless steel material. Pipe insulation 1060.3003 Aluminum coil. Anticorrosive aluminum skin. Thermal insulation of desulfurization flue in power plant. Chemical factory. Pharmaceutical factory. Oil field petrochemical. Boiler pipe insulation, etc.

Color coated aluminum plate used for aluminum profile, thickness, strength and oxide film, should conform to the relevant national standards, wall thickness should be more than 1.2 mm, tensile strength to reach 157 Newton per square meter of millimeter, yield strength to reach 108 Newton per square millimeter, oxide film thickness should reach 10 microns. If not up to the above standards, is inferior aluminum alloy doors and Windows, can not be used.

Two, look at the processing.

Color coated aluminum plate, fine processing, exquisite installation, good sealing performance, switch freely. Poor aluminum alloy doors and Windows, blind selection of aluminum series and specifications, processing shoddy, to saw cutting instead of milling processing, do not install according to the requirements, poor sealing performance, switch is not free, not only air leakage and rain and glass cracking phenomenon, but also encounter strong winds and external forces, easy to push and pull part or glass scraping or crashing down, damage damage.

Three, look at the price.

Under normal circumstances, color coated aluminum plate because of high production cost, the price is about 30% higher than inferior aluminum alloy slide. At present processing color coated aluminum plate more self-employed, they do not know the aluminum alloy anti slide structure characteristics and performance. In order to reduce the cost of jerry-building, shoddy products, hidden dangers are larger, generally not suitable for use. Can choose regular manufacturers of products

Color aluminum plate, also called pressed aluminum plate, aluminum corrugated plate, corrugated aluminum plate, aluminum plate by rolling cold bending into a variety of wave type of pressure plate. Corrugated aluminum plate (corrugated aluminum plate) has the characteristics of light weight, high strength, rich color, convenient construction, earthquake resistance, fire prevention, rain proof, long life, maintenance-free and so on. It has been widely used in dyeing liquid temperature: dyeing of color aluminum plate is divided into cold dyeing and hot dyeing. The use of cold dyeing, in the process of production for a long time, the color uniformity of the dyeing is better to master. The use time of hot dyeing is relatively short, but it is difficult to control the color. The temperature of thermal dyeing is usually 40-60℃. If the temperature is too high, it will reduce the adsorption of dyeing, and easily lead to the surface of the aluminum plate flowers.

3, the influence of color aluminum plate raw materials: usually in the production process of high purity aluminum, aluminum magnesium, aluminum manganese alloy after anodizing, its dyeing function is good, can be dyed into a variety of colors. For the plate containing silicon or copper is relatively heavy, in the process of dyeing can only be dyed into dark and black, relatively monotonous color.

4. Concentration of dyeing solution: there is a relationship between the concentration of dyeing solution and dyeing. If dyeing light color, the concentration can be lower, while dyeing dark color, the concentration can be higher. If the concentration of dyeing is relatively high, it will cause uneven color or floating color phenomenon, and it is easy to appear "color flow" in the process of cleaning and closing. In order to strengthen the adsorption of dyeing, low-concentration color will be used for extended dyeing, so that dye molecules can penetrate evenly into the deep pores of the oxide film, which can make the dyed color more harmonious and firm.

Color aluminum plate in dyeing, can not achieve the expected effect, in the construction process, the overall effect will be greatly reduced, so every dyeing steps and skills should be thoroughly familiar with the heart.