HTT-02 Application
Hot Tack Tester measures the strength of heat seals formed between thermoplastic surfaces immediately after the seal has been made and before it cools to room temperature. Hot Tack tester is especially important for vertical form-fill-seal packaging.
Principle:
A sample strip is sealed by applying pressure from two flat heated jaws under defined conditions of temperatures, contact time and pressure.
Features
1. Both Method A and Method B described in ASTM F1921
2. P.I.D. temperature control
3. 7 inch HMI touching screen operation
4. PLC control inside
5. Aluminum encapsulated sealing jaws
6. Auto zeroing, overload and over travel protection
7. Test speed 200cm/min, 1200cm/min or others
8. RS 232 port & professional software (optional)
Technical Specifications
Sealing Temperature Ambient~250℃
Temp Accuracy ±0.2℃
Heat Seal Dwell Time 0.1~9999s
Hot Tack Dwell Time 0.1~9999s
Sealing Pressure 0.15MPa~0.7MPa
Sealing Jaws 50mmx10mm Teflon Coated
Sealing Jaws Heating Double Heating
Load Cell 200N(Optional:30N50N100N500N)
Accuracy 0.5 F.S.
Resolution 0.01N
Send Inquiry to This Supplier
You May Also Like
-
Hot Sale Tear Tester Tear Strength Test of Plastic FilmUS$ 1000 - 4000MOQ: 1 Set
-
SPC-01 Stretch Film Peel Cling TesterUS$ 1000 - 4000MOQ: 1 Set
-
Electronic High-end Tensile Tester A Machine That Tests Tension Universal Tensile Testing MachineUS$ 1000 - 4000MOQ: 1 Set
-
High Precision Hot Sale Wall Thickness TesterUS$ 1000 - 4000MOQ: 1 Set
-
Hot Sale Wall Thickness TesterUS$ 1000 - 4000MOQ: 1 Set
-
Plastic Film Bag Surface Friction Coefficient Tester ASTM D1894US$ 1000 - 4000MOQ: 1 Set
-
Bevel Friction Coefficient Tester ISO 8295US$ 1000 - 4000MOQ: 1 Set
-
Hot Sale Falling Ball Impact Tester Automatic Calculation of Free-fall Impact EquipmentUS$ 1000 - 4000MOQ: 1 Set
-
Test for Friction Stripping of Wound Films ISO 8295US$ 1000 - 4000MOQ: 1 Set
-
Paper and Plastic Thin Film Thickness Measurement ASTM D374US$ 1000 - 4000MOQ: 1 Set
