SIEMENS LME21.330C2 Burner control

This burner control is used to continuously operate multi-stage or regulate medium-to-high capacity burners, and check the air damper control through air pressure monitoring. The burner control device has passed EN298 and CE certification, and complies with the directive of gas appliances and electromagnetic compatibility. Functions include fault lock indicator, fault signal lamp and reset button.

The burner control unit has a self-inspection flame monitoring circuit, which not only starts the required safety measures in case of premature or missing flame signal, but also in case of any failure of flame detector, cable or flame signal amplifier (which may simulate flame signal during burner operation). The control device is reliable and applicable to a wide range of applications, including fuel oil and gas combustion plants that must use self-inspection flame monitoring system, such as burners in continuous use, burners in intermittent operation, and burners in plants that need self-inspection for burner monitoring due to safety requirements. Suitable for gas, oil and dual-fuel burners.

Burner control is applicable to: medium-high capacity gas, oil or dual-fuel forced ventilation burners, intermittently operated multistage or regulated burners, with checked air damper control, flame monitoring, – with ultraviolet detector QRA And ionization probe, burner control of oil burner or gas burner according to EN 298:2012, applicable to air heater (WLE)