1U MCB DC Distributions
DC power distribution unit DCDU04-3 is suitable for low voltage DC power supply system, it connected between the DC power supply lines and the equipment. It’s widely used in Telecom, BTS, Mobile, Unicom, electric power, army, public security, etc.
The product has following characteristics:
◆ Rack mounting on the 1 U(19’) cabinet.
◆ Two independent inputs, each corresponds to 4 outputs.
◆ Each input rated load current is 63A and output maximum rated current are 10A and 20A.
◆ Flaming retardant material Enclosed with the protection level of IP20.
Model |
DCDU04-3 |
Rated DC Voltage (Uo) |
-48V |
Maximum Continuous Operating Voltage (Uc) |
-65V |
Frequency |
0Hz |
Rated Load Current IR |
Two input,the maximum current of each is 63A for LLVD1 and LLVD2. |
Connection |
In serial connection |
Distribution |
LLVD1: 2 outputs maximum current are 10A 2 outputs maximum current are 20A |
|
LLVD2: 2 outputs maximum current are 10A 2 outputs maximum current are 20A | |
Rated current of circuit breaker |
10A,20A |
Cross Section of Wire |
Input wire: 6~35 mm2 |
Output wire: 2~10mm2 | |
Electrical grounding |
Two M6 nuts for grounding by using M6 screws |
Send Inquiry to This Supplier
You May Also Like
-
5G DCDU 48V DC Power Distribution Unit DCPD6 DCPD7 DCPD7CUS$ 1 - 100MOQ: 1 Piece
-
DC Power Distribution Unit DCPD10DUS$ 85 - 120MOQ: 1 Piece
-
DC Power Distribution Box DCDU DCPD10BUS$ 1 - 80MOQ: 1 Piece
-
DC Power Distribution Box DCDU DCDU-06US$ 1 - 80MOQ: 1 Piece
-
20ka-120ka SPD Surge Protective DeviceUS$ 1 - 60MOQ: 1 Piece
-
1U MCB DC DistributionsUS$ 1 - 80MOQ: 1 Piece
-
DOWE Epoxy Resin MCB Insulator for Commercial Building Electrical DistributionUS$ 0.2MOQ: 1000 Units
-
LC1D09EDC Brand New DC Contactor for Mcb dc 10a Schneider LC1D09EDC LC1D09EDCNegotiableMOQ: 1
-
EPSCPE100-ABAC DCS (Distributed Control System) ModuleNegotiableMOQ: 1 Piece
-
Surface Mounted MCB Distribution Box / Electrical Distribution EnclosureUS$ 1 - 20MOQ: 100 Pieces