- SmartSolo Inc.
- China Manufacturer with main products:data acquisition system ,geophone ,Geophysical instrument ,seismic cable ,seismic node ,seismic monitoring ,Real-time monitoring system ,Energy exploration system ,Wireless seismic detection ,seismograph ,seismometer ,vibration monitoring
Home > Products > Seismic nodes > well-known geophysical geophone 3 C seismic sensor for transient surface wavesurvey
well-known geophysical geophone 3 C seismic sensor for transient surface wavesurvey
- 20000 Piece / Pieces per Month
- Shenzhen
- T/T L/C D/P D/A Credit Card PayPal Cash Escrow
- 30 days
-
Sand Water Filter/Water treatment plants
-
Automatic Doypack Seal Machine (insert and sealing machine)
-
IPX3/IPX4 Hand-held Water Spray Nozzle Test Device IEC 60529
-
IPX5,IPX6 Jet Nozzle of IEC 60529， Brass material
-
Adjustable and multifunctional Spring Impact Hammer IK01-IK07 Level Tester
-
Test probe 43 IEC 61032-Probe 43-Figure 17 Jusdtest
Product Details
| Brand Name: | SmartSolo | Place of Origin: | China | Model Number: | IGU-1BD3C |
Product Description
Production Description
IGU-BD3C-5 is a low-cost, broadband, and micro power consumption broadband smart seismic sensor.Based on the high-sensitivity geophone DT-SOLO——proudly produced by DTCC, and incorporated with electronics and software technologies in mobile internet era.With internationally well-received and reliable electronic spread spectrum technology, the frequency band range of lGU-BD3C-5 is up to 0.2Hz-150Hz.Due to its high reliability and high level of customization of storage and power capacity, it is very suitable not only for traditional active seismic exploration, but also for long-period observation of natural micro seismic, transient surface wave survey and mobile station natural earthquake monitoring, etc.
Specification
ADC resolution: 24 bits
Sample intervals: 0.25, 0.5, 1, 2, 4, 8,10, 20 ms
Self-noise Level: Whole frequency band lower than the NHNM curve，5s~1Hz lower than the NLNM curve
Operating temperature: -40℃ ~ +70℃
Waterproof: IP67
Physical Size: φ158mm × 160mm (w/o spike)
Weight: 2.8 kg (Including internal battery and spike)
Data Storage: 32GB (can be expanded to 64GB)
Operating Life@25℃: 30 days Continuous / 60 days Segmented (12hours ON/12hours SLEEP)
External Power Supply: 7V~15V DC (single supply)
Bluetooth QC: Available
Data Harvesting: USB 3.0
Charging Temperature Range: +3˚C ~ +45˚C
Distortion: <0.1% @12Hz, (0° ~ 10°) tilt，(0°~3°) horizontal tilt
Sensitivity: 200V/m/s (5.08 V/in/s)
Remark: All parameters are specified at +22℃ in the vertical position and horizontal position for horizontal geophone unless
otherwise stated.
Maximum Input Signal: ±2.5Vpeak @ Gain 0dB
Instantanteous Dynamic Range: 120dB@ Gain 0dB
Common Mode Rejection: >100dB
Gain Accuracy: <1%
GPS Time Standard: 1 ppm
Timing Accuracy: ± 10µs, GPS Disciplined
Cross Feed: <-110dB
Inter-channel Phase Offset: <0.1ms
Transverse Vibration Rejection: Better than 1%
Inter-channel Amplitude Coherence: 5%
System Dynamic Range: 140dB
Frequency Response: 0~1652Hz
Contact Us
- SmartSolo Inc.
- Contact nameKevin
- Phone86-010-4000868158
| Seismic nodes | geophone element | geophone string | Real-time Monitoring System |
| Prospecting Instrument | Geophysical exploration | Hydrophone | seismic cable |
| Connectors |
-
IEC61032-Probe 41-Figure 16 Test probe 41
-
IEC61032-Probe 32-Figure 15 Test probe 32
-
Test probe 31 IEC61032-Probe 31-Figure 14
-
Jointed Child Finger Probes IEC 61032-Probe 19-Figure 13 R 2.5±0.05 mm
-
Test probe 18 of IEC 61032 R4.3mm Jointed Child Finger Probes
-
Digital recorder for Lugeon testing
-
MRU Subsea maring motion reference unit
-
MRU maring motion reference unit
-
eMRU motion reference unit
-
IEC61032-Probe 14-Figure 10 Test probe 14
-
Short Test Pin Probe IEC61032-Test Probe 13-Figure 9
-
Long Test Pin Probe IEC61032-Probe 12-Figure 8 JSD-08
-
IEC61032-Test Probe 11-Figure 7 Φ12mm IEC 60601
-
IEC 61032:1997-test Probe 2-Figure 6 with handle
-
IEC61032-Probe D-Figure 4 Test probe D 1mm diameter
-
Test probe C IEC61032-Probe C-Figure 3 MODEL JSD-03
-
IEC61032-Probe B-Figure 2 Test probe B IP2X test
-
Test probe A IEC 61032-Probe A-Figure 1 JUSDATEST
-
Test finger ISO 20957-1:2013 Figure 1
-
JSD-K02 Test probe ABCD-Power supply Kit of IEC 61032:1997
-
PRS10 Rubidium Oscillator
-
HY-408 magnetic compass for naval
-
The BX992 is a dual-antenna receiver enclosure with integrated inertial navigation system powered by the BD992-INS
-
Trimble BD992 Dual-antenna single board solution for precise position and heading
Popular Searches
Find Similar Products By Category
- Measurement & Analysis Instruments > Other Measuring & Analysing Instruments
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Kevin
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-