Contact Platform Support
Help CenterTecMig Stainless Steel Welding Rods E310-16
Related Products
-
TecMig Stainless Steel Welding Rods E312-16US$ 4.5 - 8MOQ: 1000 Kilograms -
TecMig Stainless Steel Welding Rods E316L-16US$ 4.5 - 8MOQ: 1000 Kilograms
-
TecMig Stainless Steel Welding Rods E347-16US$ 4.5 - 8MOQ: 1000 Kilograms
-
TecMig Duplex Stainless Steel Welding Rods E2209-16US$ 4.5 - 8MOQ: 1000 Kilograms
-
TecMig Pure Nickle Cast Iron Welding Rods ENi-CI Ni99US$ 4.5 - 8MOQ: 1000 Kilograms
E310-16
AWS A5.4 E310-16
ISO3581-A-E25 20 R
GB/T 983 E310-16
Description：
An austenitic stainless steel electrode designed to weld 25Cr20Ni steels. The weld metal heat resistance scaling up to 1100-1150°C and does not contain any measureable ferrite. It can also be used to weld certain air hardening steels such as armour plate and joint stainless to unalloyed steels. Used to weld similar composition heat resistance stainless steels, high hardenability chromiums steels and dissimilar steels.
Welding Position:
Diameters:
2.5mm, 3.2mm, 4.0mm, 5.0mm.
Typical Mechanical Properties:
Tensile strength(MPa): |
605 |
Yield strength(MPa): |
-- |
Elongation(%): |
40 |
Typical Chemical Compositon:
C |
Mn |
P |
S |
Si |
Ni |
Cr |
Mo |
Cu |
0.12 |
1.35 |
0.02 |
0.003 |
0.58 |
21.5 |
26.5 |
0.32 |
0.12 |
Welding Current:(AC/DC±)
Diameter(mm) |
2.5 |
3.2 |
4.0 |
5.0 |
|
Current/A |
F/H |
60-80 |
80-120 |
100-150 |
140-180 |
Current/A |
V/OH |
40-70 |
60-100 |
80-130 |
-- |
Note:
1.The electrodes should be baked 1 hours in 300-350℃ before using.
2.Welding in short arc,and swing scope should not excess 2.5 times of the electrode diameter.
Send Inquiry to This Supplier
You May Also Like
-
TecMig 55% Nickle Cast Iron Welding Rods ENiFe-CI Ni55US$ 20 - 25MOQ: 1000 Kilograms
-
TecMig Gasless Self Shield Single Pass Flux Cored Wires E71T-GSUS$ 3 - 5MOQ: 1000 Kilograms
-
TecMig Gasless Self Shield Multi Pass Flux Cored Wires E71T-11US$ 3 - 5MOQ: 1000 Kilograms
-
TecMig Gas Shield Flux Cored Wires E71T-1C/M H4US$ 1.2 - 1.5MOQ: 1000 Kilograms
-
TecMig Gas Shield High Tensile Strength Flux Cored Wires E81T1-Ni1C/M H4US$ 2.5 - 3.5MOQ: 1000 Kilograms
-
TecMig Gas Shield High Tensile Strength Flux Cored Wires E81T1-Ni2C/M H4US$ 2.5 - 3.5MOQ: 1000 Kilograms
-
TecMig Gas Shield Metal Core Flux Cored Wires E70C-6M H4US$ 1.5 - 2.5MOQ: 1000 Kilograms
-
TecMig Low Fuming Rutile General Purpose Welding Rods E6013US$ 0.8 - 1.5MOQ: 1000 Kilograms
-
TecMig Vertical Down Rutile General Purpose Welding Rods E6013US$ 1.2 - 1.5MOQ: 1000 Kilograms
-
TecMig Iron Powder Low Hydrogen Basic Welding Rods E7018US$ 1.0 - 1.2MOQ: 1000 Kilograms
