- Jingjiang Fuji Technology Co., Ltd.
-
Main products: weichai, Caterpillar, Cummins, Cut Resistant Gloves
Home > Products > Bearing glue > Cylindrical part retainer NEW Loctiter 648 638 601 603 609 620 680 660 640 641 Bearing cylindrical part fixing cylinder glue
Cylindrical part retainer NEW Loctiter 648 638 601 603 609 620 680 660 640 641 Bearing cylindrical part fixing cylinder glue
Negotiable
1 (Min.Order)
- 1000 per Month
- T/T Credit Card
You May Like
-
loctiter 601 603 609 620 640 640 638 648 680 Cylinder Part Retainer Bearing glue Anaerobic Retaining liquid glue epoxy 50ml
-
loctiter 638 bearing metal epoxy glue metal high temperature 50ml 250ml Cylindrical part retainer pipe thread glue Anaerobic 638
-
loctiter 680 Cylinder Part Retainer Bearing glue Anaerobic Retaining liquid glue epoxy 50ml 250ml high strength Bearing locking
-
50g New Upgrade Loctiter 601 603 609 Cylinder Holding Glue Equipment Bearing Adhesive Sealant
-
New Upgrade 50ml Loctiter 620 638 640 Anaerobic Adhesive Cylindrical Retaining Repair Adhesive Metal Bearing Glue
-
New 50ml Loctiter 641 648 680 Retaining Compound Bearing Hold Sealing Glue 680 Cylindrical Part Adhesive
Product Description
Features:
Loctite 601
Purpose: High strength, low viscosity, suitable for small clearance.
Viscosity: 100/150 (mpa) s)
Capacity: 50 ml
Color: Green
Maximum filling clearance (mm):0.1
Shear Strength (PSI):3700
Curing speed (25 ℃):24 hours
Relative density :1.1
A general purpose high strength holding adhesive with oil and other contaminants. Seals and holds the cylindrical part assembly
with a maximum filling diameter clearance of 0.13mm. The initial curing within 30 minutes can prevent micro-vibration wear and
crack corrosion between metal matches.
Loctite 603
Packing specification: 50ml
Color: green
Viscosity: 100/150 m pa.s
Maximum filling gap: 0.127mm
Shear strength steel / steel: 3770PSI *
Curing speed: 10 minutes / 24 hours
Recommended accelerator: 7649/7471
Relative density: 1.1
Typical use: oil resistance and low viscosity, suitable for occasions with small clearance and interference fit, suitable for fit
clearance below 0.13MM Of cylindrical parts. It can be used in the environment with oily residue to effectively prevent
micro-vibration wear and corrosion in metal assembly operations.
Loctite 609
Packing specification: 50ml
Color: green
Viscosity: 100/140 mpa.s
Maximum filling gap: 0.127mm
Shear strength steel / steel: 2290PSI *
Curing speed: 10 minutes / 24 hours
Recommended accelerator: 7649/7471
Relative density: 1.1
Typical uses: high strength, used for bonding cylindrical fittings, including for holding rotors and shafts in low-power motors
and micro-motors. Lock the bushing and bushing, improve the fit strength of the press fit, and repair the worn hole-shaft fittings
or out-of-tolerance parts.
Loctite 620
Product specifications: 50ML
Appearance color: green
Viscosity: 8500CP
Curing speed: initial curing 30 minutes
Bonding characteristics: clearance fit, high temperature resistant type
Temperature resistance: -54 ~ + 232 degrees
Application: High viscosity liquid, suitable for metal cylindrical assembly operations with a gap of less than 0.381mm, can
prevent fretting and corrosion in metal assembly operations, and can prevent leakage.
Loctite 638
Features: high viscosity, not easy to disassemble, suitable for large clearance.
Viscosity (mpa) s) : 2500
Capacity: 50 ml
Color: Green
Maximum filling clearance (mm):0.127
Shear strength (PSI):3625
Speed (25 ° C):24 hours
Relative density :1.1
Typical use: It is suitable for fastening cylindrical parts with clearance below 0.38mm. It takes 5 minutes to solidify initially.
It is suitable for fast-working occasions.
Loctite 640
Features: Medium viscosity, high temperature resistance.
Viscosity (mpa) s) : 600
Capacity: 50 ml
Color: Green
Maximum filling clearance (mm):0.178
Speed (25 ° C):24 hours
Relative density :1.1
Typical use: high temperature resistance up to 204 degrees Celsius, suitable for high temperature operation.
Loctite 641
Features: Medium viscosity, easy to disassemble.
Viscosity (mpa) s) : 400/800
Capacity: 50 ml
Color: Yellow
Shear strength psi:940
Maximum filling clearance (mm):0.25
Speed (25 ° C):24 hours
Curing time: initial curing 20 minutes, full curing 24 hours.
Relative density :1.07
Typical use: suitable for cylindrical fittings, easy to remove.
Loctite 648
Product specifications: 50ML
Appearance color: green fluorescent liquid Viscosity: 500CP Curing speed: initial curing 5 minutes Bonding strength: high
strength, difficult to disassemble Temperature resistance: -55 ~ + 149 degrees
Applications:
Suitable for active metals, stainless steel and plated surfaces. Typical applications include gears and sprockets fixed to the
rotor on the gearbox shaft and motor shaft.It is suitable for filling operation with gap less than 0.152mm.
Loctite 680
Features: High viscosity, suitable for permanent use where disassembly is not required.
Viscosity (mpa) s) : 750/1750
Capacity: 50 ml
Color:Blue
Shear strength psi:2800
Maximum filling clearance (mm):0.127
Speed (25 ° C):24 hours
Curing time: initial curing 10 minutes, full curing 24 hours.
Relative density :1.1
Typical use: Suitable for cylindrical parts up to 0.38mm, bearings which do not need to be removed.
Loctite 601
Purpose: High strength, low viscosity, suitable for small clearance.
Viscosity: 100/150 (mpa) s)
Capacity: 50 ml
Color: Green
Maximum filling clearance (mm):0.1
Shear Strength (PSI):3700
Curing speed (25 ℃):24 hours
Relative density :1.1
A general purpose high strength holding adhesive with oil and other contaminants. Seals and holds the cylindrical part assembly
with a maximum filling diameter clearance of 0.13mm. The initial curing within 30 minutes can prevent micro-vibration wear and
crack corrosion between metal matches.
Loctite 603
Packing specification: 50ml
Color: green
Viscosity: 100/150 m pa.s
Maximum filling gap: 0.127mm
Shear strength steel / steel: 3770PSI *
Curing speed: 10 minutes / 24 hours
Recommended accelerator: 7649/7471
Relative density: 1.1
Typical use: oil resistance and low viscosity, suitable for occasions with small clearance and interference fit, suitable for fit
clearance below 0.13MM Of cylindrical parts. It can be used in the environment with oily residue to effectively prevent
micro-vibration wear and corrosion in metal assembly operations.
Loctite 609
Packing specification: 50ml
Color: green
Viscosity: 100/140 mpa.s
Maximum filling gap: 0.127mm
Shear strength steel / steel: 2290PSI *
Curing speed: 10 minutes / 24 hours
Recommended accelerator: 7649/7471
Relative density: 1.1
Typical uses: high strength, used for bonding cylindrical fittings, including for holding rotors and shafts in low-power motors
and micro-motors. Lock the bushing and bushing, improve the fit strength of the press fit, and repair the worn hole-shaft fittings
or out-of-tolerance parts.
Loctite 620
Product specifications: 50ML
Appearance color: green
Viscosity: 8500CP
Curing speed: initial curing 30 minutes
Bonding characteristics: clearance fit, high temperature resistant type
Temperature resistance: -54 ~ + 232 degrees
Application: High viscosity liquid, suitable for metal cylindrical assembly operations with a gap of less than 0.381mm, can
prevent fretting and corrosion in metal assembly operations, and can prevent leakage.
Loctite 638
Features: high viscosity, not easy to disassemble, suitable for large clearance.
Viscosity (mpa) s) : 2500
Capacity: 50 ml
Color: Green
Maximum filling clearance (mm):0.127
Shear strength (PSI):3625
Speed (25 ° C):24 hours
Relative density :1.1
Typical use: It is suitable for fastening cylindrical parts with clearance below 0.38mm. It takes 5 minutes to solidify initially.
It is suitable for fast-working occasions.
Loctite 640
Features: Medium viscosity, high temperature resistance.
Viscosity (mpa) s) : 600
Capacity: 50 ml
Color: Green
Maximum filling clearance (mm):0.178
Speed (25 ° C):24 hours
Relative density :1.1
Typical use: high temperature resistance up to 204 degrees Celsius, suitable for high temperature operation.
Loctite 641
Features: Medium viscosity, easy to disassemble.
Viscosity (mpa) s) : 400/800
Capacity: 50 ml
Color: Yellow
Shear strength psi:940
Maximum filling clearance (mm):0.25
Speed (25 ° C):24 hours
Curing time: initial curing 20 minutes, full curing 24 hours.
Relative density :1.07
Typical use: suitable for cylindrical fittings, easy to remove.
Loctite 648
Product specifications: 50ML
Appearance color: green fluorescent liquid Viscosity: 500CP Curing speed: initial curing 5 minutes Bonding strength: high
strength, difficult to disassemble Temperature resistance: -55 ~ + 149 degrees
Applications:
Suitable for active metals, stainless steel and plated surfaces. Typical applications include gears and sprockets fixed to the
rotor on the gearbox shaft and motor shaft.It is suitable for filling operation with gap less than 0.152mm.
Loctite 680
Features: High viscosity, suitable for permanent use where disassembly is not required.
Viscosity (mpa) s) : 750/1750
Capacity: 50 ml
Color:Blue
Shear strength psi:2800
Maximum filling clearance (mm):0.127
Speed (25 ° C):24 hours
Curing time: initial curing 10 minutes, full curing 24 hours.
Relative density :1.1
Typical use: Suitable for cylindrical parts up to 0.38mm, bearings which do not need to be removed.
The above price is for 50ml, if you need 250ml, please contact us to negotiate the price
Product Description
Specification
item | value |
CAS No. | 7085-85-0 |
Other Names | Cylindrical retaining compound |
EINECS No. | 230-391-5 |
Place of Origin | China |
Fujian | |
Classification | Other Adhesives |
Main Raw Material | Acrylic |
Usage | cylindrical, bearing |
Brand Name | loctiter |
Model Number | 648 638 601 603 609 620 680 660 640 641 |
Type | silicone sealant |
Product name | loctiter cylindrical retainer |
Color | colorful |
Shelf life | 2 Years |
Use | Cylindrical component fixing, bearing assembly, etc. |
capacity | 50ml/250ml |
FAQ
1. who are we?
We are based in Fujian, China, start from 2022,sell to Eastern Europe(30.00%),Northern Europe(20.00%),North America(10.00%),South America(10.00%),Eastern Asia(10.00%),Western Europe(10.00%),Southern Europe(10.00%). There are total about null people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Thread glue,Screw glue,Instant adhesive,silica gel,Super glue
4. why should you buy from us not from other suppliers?
Our Company specializes in operating screw glue, thread glue, instant dry glue, silica gel, cover glue and other adhesive products, quality assurance, welcome to order cooperation
5. what services can we provide?
Accepted Delivery Terms: FOBï¼›
Accepted Payment Currency:USD;
Accepted Payment Type: T/T;
Language Spoken:English,Chinese
We are based in Fujian, China, start from 2022,sell to Eastern Europe(30.00%),Northern Europe(20.00%),North America(10.00%),South America(10.00%),Eastern Asia(10.00%),Western Europe(10.00%),Southern Europe(10.00%). There are total about null people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Thread glue,Screw glue,Instant adhesive,silica gel,Super glue
4. why should you buy from us not from other suppliers?
Our Company specializes in operating screw glue, thread glue, instant dry glue, silica gel, cover glue and other adhesive products, quality assurance, welcome to order cooperation
5. what services can we provide?
Accepted Delivery Terms: FOBï¼›
Accepted Payment Currency:USD;
Accepted Payment Type: T/T;
Language Spoken:English,Chinese
Company Profile
Jingjiang Fuji Technology Co., Ltd.
Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.
Contact Us
- Jingjiang Fuji Technology Co., Ltd.
- Contact nameJack Xu Chat Now
- Phone86-188-52690200
- Addressrenminlu
Product Categories
New Products
-
50ml loctiter 515 sealant fluorescent purple black metal pipe thread sealant gearbox motor housing plane flange glue
-
50ml Loctiter 660 Glue High Strength Shaft Pin Repair Anaerobic Glue Motor Bearing Holding Filling Cylindrical Adhesive Sealing
-
Instant glue loctiter 401 406 403 414 415 416 420 424 425 460 435 431 444 metal plastic rubber adhesive 498 496 495 super glue
-
20ml Super Glue Loctiter 401 Repairing Glue Instant Adhesive Self-Adhesive 403 406 495 380 480 for Metal Plastic Rubber shoes
-
20g Super glue Loctiter 401 402 403 404 406 407 408 Instant adhesive 411 412 414 415 416 417 420 422 424 425 431 435 495 496 498
-
20g Loctiter super adhesive 495 496 444 401 460 498 Quick instant dry glue glue 4011 4014 4061 4204 4850 4860 4861 406
-
20g Loctiter 454 409 High temperature resistant gel glue Waterproof paste aquarium Adhesive universal instant dry super glue
-
500g Loctiter Fixmaster Superior Metal Loctiter 44143 Two-component AB glue metal repair agent stainless steel repair Epoxy glue
-
20ml loctiter 480 black instant adhesive high-strength anti-stripping hot and humid environment tire repair rubber super glue
-
Loctiter 510/515/518/573/574/5188 anaerobic glue plane sealant 50/300ml high temperature resistant metal flange gap gasket glue
-
Epoxy resin ab glue river table handmade diy ultra-clear crystal drop glue potting and sealing painting specimen hard glue craft
-
Enhanced Version Super Glue Repairing Instant Dry Adhesive Loctiter 380 410 480 4210 438 for Metal Ceramic Plastic Glass Rubber
-
20g loctiter 454 strong instant adhesive metal plastic wood ceramic bonding transparent paste gel glue
-
500g Loctiter 401 403 406 416 460 480 495 496 Super Glue Quick Instant Drying Adhesive Metal wood quick drying glue
-
Instant Adhesive 20g Loctiter 401 403 406 Colorless transparent super glue
-
20g Loctiter 414 415 416 Super Glue Instant Adhesive Universal Type Sticky Plastic Rubber Quick-drying Glue
-
20g Loctiter 460 495 496 Instant Dry Super Glue No Whitening No Smell Plastic Wood Rubber Metal Universal Transparent Adhesive
-
Loctiter bearing glue 601 high-strength cylindrical component holding glue high temperature anti-vibration locking agent
-
20ml Super strong Glue Loctiter 406 instant glue liquid for plastic rubber metal ceramic Repairing Not whitish and odorless
-
20ml Loctiter Super Glue Type 401 402 403 Repairing Glue Instant Adhesive Self-Adhesive
-
20g Loctiter 404 406 407 Super Glue Instant Adhesive Universal Type Sticky Plastic Rubber Quick-drying Glue
-
Loctiter super glue 408 411 412 Instant Dry Glue Repair Adhesive 20g General purpose glue
-
20g Loctiter 414 415 416 Quick Drying Adhesive Metal Plastic Rubber Adhesive Colorless Translucent Super Glue
-
threadlocker loctiter 243 277 222 290 263 241 anaerobic sealant anti-loose adhesive screw glue liquid medium strength blue
Popular Searches
- Acrylic Adhesives
- adhesive glue
- epoxy adhesive
- super glue
- super adhesive
- cyanoacrylate adhesive
- epoxy glue
- rubber adhesive
- wood glue
- water acrylic
- Self Adhesive
- Pressure Sensitive Adhesive
- Glue Adhesive
- Lamination Adhesive
- Silicone Sealant Adhesive
- Water Based Adhesive
- Acrylic Laminating Adhesive
- Sealing Adhesive
- Adhesives & Sealants
- silicone sealant
- construction adhesive
- glass sealant
- silicone adhesive
- neutral silicone
- pu sealant
- rtv silicone
- polyurethane adhesive
- polyurethane sealant
- silicone sealant metal
- Polyurethane Adhesive Sealant
Find Similar Products By Category
- Chemicals > Adhesives & Sealants
Jingjiang Fuji Technology Co., Ltd.
Business license
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now
Jingjiang Fuji Technology Co., Ltd.
AIBot OnlineThis conversation is AI-generated. Contact manufacturer before transaction to confirm info.
-
Jack Xu
Welcome to my shop, I'm glad to serve you. Please feel free to send me any questions you may have.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile