GE DS200TBQCG1AAA Supply Gas Turbine DCS System Module

Shenzhen Changxin automation equipment Co., Ltd

FROM：lanlan

E-Mail：3007542130@qq.com
TEL/WeChat:15359298293

Product Details

GE DS200TBQCG1AAA Supply gas turbine DCS system module

GE turbine module of the gas turbine can be single, multiple or one. They consist of a turbine base cabin and modules. They have several main characteristics: a High durability: All GE gas turbine modules adopt a modular structure design strategy to meet future needs and ensure that the service life of the unit without maintenance components in operation is more than 10 years. It is light in weight, small in volume, light in weight, convenient for installation, and can maintain high reliability and flexibility. b. Economical operation: the maintenance cost can be reduced by 50%. The maintenance time is short and the maintenance cost is low. C. Suitable for multiple purposes. " The global application of gas turbines is a huge and complex project, so in many cases, the power generation and maintenance costs must be considered at the same time. There are many challenges in the installation and maintenance process. First, the equipment usually has high operating temperature and other environmental restrictions. High efficiency and low noise are required for use in high temperature, high humidity or other harsh environments; Secondly, it shall meet the requirements of engine safety and reliability standards; Third, the equipment should be low in cost and environmentally friendly; The fourth requirement is to be able to operate in high pollution areas; Fifth, new parts shall be used; The sixth highest requirement is to use reliable new parts. It is impossible to meet this requirement under other circumstances; Without damaging the service life; Sixth, higher reliability and flexibility are required. Therefore, it is necessary for turbine modules to be widely used in the world, especially in high temperature environments where the requirements are very demanding. In addition, it should be able to withstand the impact of high temperature and high pressure) thermal radiation and other harmful substances on performance. For example, the turbine module may be subject to mechanical friction during operation; It may produce higher temperature value and cause higher harm to the environment; Low turbine speed ratio and higher ambient temperature; High installation and maintenance costs. Because of its high performance, the unit can have higher operating efficiency or improve operating energy efficiency and reduce maintenance costs; In addition, the service life of gas turbine can be extended. At the same time, the module can provide the same high level of operation and maintenance costs as traditional gas turbines. These characteristics ensure that the requirements for low noise and low emissions are the highest level of clean emissions and the concept of sustainable development. As one of the core competitiveness of the global aviation oil market, natural gas and biomass power generation technology (HJT) units are essential for the application of large gas turbines. Currently, it is increasingly used for the world's largest civil transport aircraft

All brands DCS, PLC spare parts

 1.Invensys Foxboro: I/A Series system, FBM (field input/output module) sequence control, trapezoidal logic control, accident recall processing, DAC, input/output signal processing, data communication and processing.

  2.Invensys Triconex: Redundant fault-tolerant control system, the most modern fault-tolerant controller based on triple modular redundancy (TMR) structure.

  3.Westinghouse (Westinghouse): OVATION system, WDPF system, MAX1000 system spare parts.

  4.Rockwell Allen-Bradley: ICS TRIPLEX、Reliance Ryan, SLC 500/1747/1746, MicroLogix/1761/1763/1762/1766/1764, CompactLogix/1769/1768, Logix 5000/1756/1789/1794/1760/1788, PLC-5/1771/1785, etc.

  5.Schneider Modicon: Quantum 140 series processors, control cards, power modules, etc.

  6.ABB: Industrial Robot Spare Parts DSQC Series (No. 2, No. 3, No. 4, No. S4C, No. S4C, IRC5), 

  7.Bailey INFI 90, etc.

  8.Siemens (SIEMENS):Siemens MOORE, Siemens Simatic C1, Siemens CNC system and so on.

  9.Motorola (Motorola): MVME 162, MVME 167, MVME1772, MVME177 and other series.

 10.XYCOM:I/O, VME board and processor.

 11.GE FANUC (GE FANUC): modules, cards, drives and other spare parts.

12.Yaskawa (ochuan): servo controller, servo motor, servo driver.

13.Bosch Rexroth (BOSCH Rexroth): Indramat, I/O module, PLC controller, drive module and so on.

14.Woodward (Woodward): SPC valve position controller, PEAK150 digital controller.

15.Spare parts for industrial robot system

 If you need to inquire or purchase ,please send the product models to my email or call me directly .

Contact detail:Mobile/ WeChat/ WhatsApp:+86-15359298293

E-mail:.3004572130@qq.com

QQ: 3007542130