BENTLY NEVADA 133819-01 Power supply small card module

Shenzhen Changxin automation equipment Co., Ltd

FROM：lanlan

E-Mail：3007542130@qq.com
TEL/WeChat:15359298293

Product Details

BENTLY NEVADA 133819-01 Power supply small card module

BENTLY NEVADA 133819-01 Power supply small card moduleBENTLY NEVADA 3500/53 133388-01  Module power card<1 mAdc, Dry Contact to Common Alarm Inhibit: Description: Used to inhibit all alarms in the 3500 rack. Maximum Current: <1 mAdc, Dry Contact to Common Rack Reset: Description: Used to clear latched alarms and Timed OK Channel Defeat. Maximum Current: <1 mAdc, Dry Contact to Common Data Collection Keyphasor* Inputs: • Supports the four 3500 system Keyphasor signals. The speed range support is based on the number of dynamic channels enabled: Number of Channels Minimum Speed Maximum Speed 1 to 16 1 rpm 100,000 rpm 17 to 24 1 rpm 60,000 rpm 25 to 48 1 rpm 30,000 rpm • Supports multiple events per revolution speed inputs up to 20 kHz. Startup / Coastdown Data • Data collected from speed and time intervals. • Increasing and decreasing speed interval independently programmable. • Initiation of transient data collection based on detecting the machine speed within one of two programmable windows. • The number of transient events that can be collected is only limited by the available memory in the module. Alarm Data Collection • Pre- and post-alarm data. • 1 second of static values collected for 10 minutes before the event and 1 minute after the event. • 100 ms static values collected for 20 seconds before the event and 10 seconds after the event. • 2.5 minutes of waveform data at 10-second intervals before the alarm and 1 minute collected at 10- second intervals after the alarm. Static Values Data • TDI will collect the static values including the values measured by the monitors. • TDI provides four nX static values for each point. Amplitude and phase are returned for each of the values.

All brands DCS, PLC spare parts

 1.Invensys Foxboro: I/A Series system, FBM (field input/output module) sequence control, trapezoidal logic control, accident recall processing, DAC, input/output signal processing, data communication and processing.

  2.Invensys Triconex: Redundant fault-tolerant control system, the most modern fault-tolerant controller based on triple modular redundancy (TMR) structure.

  3.Westinghouse (Westinghouse): OVATION system, WDPF system, MAX1000 system spare parts.

  4.Rockwell Allen-Bradley: ICS TRIPLEX、Reliance Ryan, SLC 500/1747/1746, MicroLogix/1761/1763/1762/1766/1764, CompactLogix/1769/1768, Logix 5000/1756/1789/1794/1760/1788, PLC-5/1771/1785, etc.

  5.Schneider Modicon: Quantum 140 series processors, control cards, power modules, etc.

  6.ABB: Industrial Robot Spare Parts DSQC Series (No. 2, No. 3, No. 4, No. S4C, No. S4C, IRC5), 

  7.Bailey INFI 90, etc.

  8.Siemens (SIEMENS):Siemens MOORE, Siemens Simatic C1, Siemens CNC system and so on.

  9.Motorola (Motorola): MVME 162, MVME 167, MVME1772, MVME177 and other series.

 10.XYCOM:I/O, VME board and processor.

 11.GE FANUC (GE FANUC): modules, cards, drives and other spare parts.

12.Yaskawa (ochuan): servo controller, servo motor, servo driver.

13.Bosch Rexroth (BOSCH Rexroth): Indramat, I/O module, PLC controller, drive module and so on.

14.Woodward (Woodward): SPC valve position controller, PEAK150 digital controller.

15.Spare parts for industrial robot system

 If you need to inquire or purchase ,please send the product models to my email or call me directly .

Contact detail:Mobile/ WeChat/ WhatsApp:+86-15359298293

E-mail:.3004572130@qq.com

QQ: 3007542130

Overview of 3500 Series Components:

● 3500/05 System Instrumentation Framework

● 3500/15 power module

● 3500/22M Rack Interface Module with TDI

● 3500/25 Keyphasor ® modular

● 3500/32 4-channel relay module

● 3500/33 16 Channel Relay Module

● 3500/34 TMR Relay Module

● 3500/40M Proximitor ® Monitor Module: Channel Type - Radial Vibration, Axial Displacement, Eccentricity, Differential Expansion

● 3500/42M Proximitor ® / Displacement/Velocity Acceleration Monitor Module: Channel Type - Acceleration, Velocity, Shaft Absolute Vibration

● 3500/45 Position Monitor Module: Channel Type - Axial Displacement, Differential Expansion, Ramp Differential Expansion, Shell Expansion, Valve

● 3500/50 speed module

● 3500/53 overspeed detection module

● 3500/60 and 3500/61 Temperature Monitor Modules

● 3500/62 Process Variable Monitor Module

● 3500/63 gas monitor

● 3500/64M Dynamic Pressure Monitor

● 3500/65 16 Channel Temperature Module

● 3500/70M reciprocating compressor impact/speed monitor

● 3500/72M Piston Rod Position Monitor

● 3500/77M cylinder pressure monitor

● 3500/92 Communication Gateway

● 3500/93 LCD display unit

● 3500/94 VGA display unit

● 3500/95 system integrated PC display device