Contact Platform Support
Help CenterH Finned Tube; Square Finned Tube
Related Products
-
Rectangular Finned Tubes, Double H Fin Tubes, Square Fin Pipe,US$ 50 - 3000MOQ: 100 Pieces -
Inner Finned Tube; Internally Finned TubeUS$ 50 - 3000MOQ: 100 Pieces
-
High Flux Tube, High Flux Tubes, High Flux Heat Exchange TubeUS$ 50 - 3000MOQ: 100 Pieces
-
Single Row Flat Fin Tube|Single Row Finned TubeUS$ 50 - 3000MOQ: 100 Pieces
-
Elliptical Tube With Rectangular Fins Tube_Finned TubeUS$ 50 - 3000MOQ: 100 Pieces
H finned tube is also called square finned tube to recover the waste heat of exhaust gas from power station boilers, industrial boilers, industrial kilns, ship power plants, etc., and effectively improve the utilization rate of fuel, and the enhanced heat exchange is arranged at the tail of the system flue element. Due to the characteristics of the convective heat transfer of the low-temperature flue gas-that is, the heat release coefficient a1 of the flue gas to the tube wall is much smaller than the heat release coefficient a2 of the tube wall to the steam and waterside, the use of an extended heating surface on the flue gas side is very effective necessary. The "economizers" (also called economizers) currently used in boilers include smooth tubes, spiral fin tubes, cast iron fin tubes, membrane wall tubes, etc. Except for the smooth tube type, the rest all Expand the heating surface structure.
The shortcomings of welded steel spiral fin tubes in practical application are mainly that the expansion of the surface area is restricted by the manufacturing process. The spiral fins wound on the tube are difficult to remove dust, which is easy to cause dust accumulation and blockage, and its flue gas side The flow resistance of the gas is high, so its application range is greatly affected by the fuel quality. Its advantages are high productivity, fewer manufacturing processes, and high material utilization.
In the structural design of the finned tube, a separate structure is adopted for the dust-forming part of the tube, which overcomes the shortcomings of easy dust accumulation, dust blocking, and gas resistance of the spiral fin tube. In addition, the fins of the fin tube are in a cantilever beam structure. Under the action of pulsed airflow, the vibration of the fins is more beneficial to the treatment of dust staining.
In order to forward you a prompt offer we would be pleased to receive your detailed inquiry including:
• Base tube material
• Base tube size (OD x WT x Length)
• Fin material
• Fin type
• Fin diameter or height
• Fin thickness
• Fins per inch, meter, or fin pitch
• Lenght of plain, unfinned ends
• Finned Tube Quantity
Send Inquiry to This Supplier
You May Also Like
-
L Finned Tube, L-Foot Tension Wound Finned TubesUS$ 50 - 3000MOQ: 100 Pieces
-
Integral Low Finned Tube, Integral Low Fin TubingUS$ 50 - 3000MOQ: 100 Pieces
-
Internal Grooved Copper Tube | Internal Thread Copper TubeUS$ 50 - 3000MOQ: 100 Pieces
-
Studded TubesUS$ 50 - 3000MOQ: 100 Pieces
-
Twisted Tube, Twist Flate-tube, Brown Twisted TubeUS$ 50 - 3000MOQ: 100 Pieces
-
HFW Serrated Finned Tube, High Frequency Welded Serrated FinUS$ 50 - 3000MOQ: 100 Pieces
-
Internally Multi-lead Rifled Steel Tubes | Optimized Multi-lead RifledUS$ 50 - 3000MOQ: 100 Pieces
-
Parallel Finned Tubes | Rectangular Finned TubesUS$ 50 - 3000MOQ: 100 Pieces
-
Phosphorus Copper Brazed Fin Tube | Brazed Copper Finned TubeUS$ 50 - 3000MOQ: 100 Pieces
-
Double S Type Fin Tube | Rectangular Finned TubeUS$ 50 - 3000MOQ: 100 Pieces
