Home > Products > CNC Controller > Guangzhou CNC GSK 980TB3 GSK 980TB3-V Lathe numerical control system

Share|

Guangzhou CNC GSK 980TB3 GSK 980TB3-V Lathe numerical control system

Name: Guangzhou CNC GSK 980TB3 GSK 980TB3-V Lathe numerical control system
Price: Negotiable

FOB Price

Negotiable

1 (Min.Order)

Supply Ability 1000 per Month
Payment Terms:T/T Credit Card

Request Sample Customized Request Download Product Catalog

Contact Now

Get lowest price Inquiry Basket

Product Description

GSK 980TB3(TB3-V)lathe CNC system

GSK 980TB3 is an upgraded product of GSK 980tb2. It mainly has horizontal and vertical structures to meet the needs of different users. The system adopts ARM9 hardware platform, runs faster, ensures high-speed and high-efficiency processing, and has the functions of quadratic curve interpolation, elliptic interpolation, parabola interpolation, groove processing cycle command, automatic tool compensation and so on. Front RS232 communication interface and front USB interface support u disk file operation and software upgrade. 980tb series system has a total sales volume of 100000 sets, which is the choice of economical CNC system.

Specification

Motion control function

●Control axis: X-axis, Z-axis, Y-axis, c-axis (optional);

Simultaneous control axis (interpolation axis): x-axis、z-axis;

●Interpolation method: x-axis and z-axis linear and circular interpolation

(Y-axis can be linked with other axes in G00 / G01)

●Position command range: ± 9999.999mm

●Minimum instruction unit: 0.001mm

●Maximum speed: 30min

●Fast magnification: F0, 25%, 50%, 75%, 100% five level real-time adjustment

●Maximum feed speed: linear 15m / min.

●Feed rate: 0 ~ 150% sixteen level real-time adjustment Manual feed speed: 0mm / min-1260 mm/min, 16 level real-time adjustment

●Feed per revolution: 0.01mm/r ~ 500mmr (1024p / or 1200p spindle encoder shall be installed)

●Acceleration and deceleration mode: linear rear acceleration and deceleration

●Electronic gear ratio: frequency doubling 1 ~ 65535,frequency division 1 ~ 65535

●Function of manual pulse generator: three gears of 0.001mm, 0.01mm and 0.1mm

●External hand pulse

Display interface

●Display type: 7-inch wide 16:9 LCD, 480 × 234tft color LCD

●Support Chinese and English interfaces, selected by parameters

●Real time clock display

●Machining track display

G function

●There are 33 codes in total, including 3 single dependent cycle codes and 6 compound cycle codes.

●27 user macros

●Subroutine call, user macro program call

●Automatic chamfering

Thread function

●Common thread (following spindle) flexible tapping

●Single head / multi head metric and inch straight thread, taper thread and end face thread, equal pitch thread and variable pitch thread

●The length, angle and speed characteristics of thread tailing can be set by program and parameters

●Thread pitch: 0.001mm-500mm (Metric)、0.06 teeth / inch - 25400 teeth / inch (British system)

Compensation function

● pitch error compensation: 360 compensation points for X, Z and Y axes respectively, and the compensation amount of each point is ± 0.007 × Compensation ratio

● tool compensation execution mode: moving tool coordinate offset (can be set through parameters)

● tool compensation: 64 groups of tool length compensation

● tip radius compensation

● reverse clearance compensation: (x, Z, Y axis) 0mm ~ 65.535mm

T tool function

● adaptive tool rest: the maximum setting is 16 station electric tool rest, Liuxin tool rest (12 stations), dema tool rest (coding or counting)

● tool change mode: MD automatic absolute tool change or manual relative tool change, forward rotation tool selection and reverse locking

● tool setting mode: fixed-point tool setting, trial cutting tool setting and return to mechanical zero point tool setting

● tool position signal input mode: direct input

S spindle function

● spindle speed switching value control: S1, S2, S3, S4 four gear switching value control

● spindle speed analog voltage control: spindle speed 0V ~ 10V analog voltage control, four gear spindle automatic shift can be set

● spindle inching control

● spindle constant linear speed cutting function (under spindle analog control mode)

M auxiliary functions

● manual / MDI / automatic control of spindle forward rotation, reverse rotation and stop

● coolant start and stop

● lubrication start stop

● MDI / automatic mode controls chuck clamping / loosening, and controls the advance and retreat of tailstock

● hydraulic chuck and tailstock

I / O function

● I / O function diagnostic display

● 32 point input and 32 point output

Program editing

● program capacity: 32MB, 500 programs

● format: relative absolute mixed programming

● subroutine: editable, supporting quadruple subroutine nesting

signal communication

● front RS232 communication interface, which is standard configuration

● two way transmission of part program, parameter and other documents with PC to support system upgrading

● front USB interface makes it more convenient to transfer part programs, parameters and other files

Safety function

● protective door

● tricolor lamp

● emergency stop

● hardware travel limit

● software travel check

● data backup and recovery

Adapter parts

● switching power supply: GSK PB2 (supplied together, installed and connected)

● drive unit: DA98 series AC servo drive unit, GS2000 economical or Dy3 series, DF3 series stepping drive unit

● spindle drive unit: gs3000y-n economical type

● tool holder controller: GSK TB tool holder controller

Assembly form

●Horizontal、box 、 vertical

Product features

◆ conic interpolation, ellipse interpolation and parabola interpolation ◆ concave machining cycle command function ◆ automatic tool compensation function

◆custom M code (for automatic feeding) adapts to servo spindle and controls spindle indexing ◆ front USB interface, supporting U disk file operation and software upgrade ◆ multiple security protection functions, complete data backup and recovery

980TB Series sales diagram

Since 2005, 980tb system has been officially sold; Proceed from meeting the actual use of customers, continuously design and improve, improve and improve the system performance; The sales volume of 980tb system has increased year by year, which has been unanimously recognized by the majority of users.

Packing & Delivery

FAQ

Q: Do you support customized manufacturing?
A: Yes,we can customized manufacturing according to customer's requirment. We support to OEM your own company display interface and logo.
Q: How long is your delivery time?
A: Generally it is 3-5 days if the goods are in stock. or it is 5-10 days if the goods are not in stock, it is according to
quantity.10-20 days if customized manufacturing.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample with sample price.
Q: What is your terms of payment ?
A: Payment<=2000USD, 100% in advance. Payment>=1000USD, 70% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below

Contact Us

Shenzhen Denver Servo Technology Co., Ltd.

New Products

Hollow cup motor	Ungrouped	Servo spindle motor	servo motor
Servo driver	robot	retarder	mechanical equipment
Machine tool accessories	lathe	Hyperbaric oxygen chamber	CNC Controller
Frequency converter accessories	Frequency converter	Engraving machine spindle motor	Embroidery machine accessories
Cylinders	Cutting machine parts	coupling	CNC toolholder
CNC spindle motor

Guangzhou CNC GSK 980TB3 GSK 980TB3-V Lathe numerical control system

Product Description

GSK 980TB3(TB3-V)lathe CNC system

Contact Us

Popular Searches

Find Similar Products By Category