polypropylene packing bag AD STAR Cement Bags Packaging Bag for Putty Powder

During the production process polypropylene fabric sleeve is being converted to the brick bags. For that we seal fabric seams without glue, using only heated up to 400 °C air. Thus Ad Star polypropylene bags do not contain glue and do not contaminate packaged product. At the end of life cycle polypropylene bags with valve can be 100% recycled, i.e. it is typical green packaging material and environmentally friendly technology. Once the bag filling process is finished, PP valve of the bag can be sealed using ultrasonic sealing device; that makes box type bags completely impermeable for water.

How to purchase Ad Star polypropylene brick bags ?

Email or call us. We will send you a brief questionnaire to clear some technical parameters and printing layout for the bags surface. After obtaining that data we will be able to produce a pilot batch of polypropylene bags for testing on the customer’s site. All valve bags are being produced only under the order after approval of the technical parameters. We deliver our products throughout Russia. It is also possible to deliver to any country of the European Union, Middle East or Africa.

Color and size of Ad Star bags with valve

We produce woven polypropylene box type bags (brick bags) with valve for 9, 10, 11, 12 and 13 funnel, i.e. with width of valve 90 mm, 100 mm, 110 mm, 120 mm and 130 mm. We can produce woven bags with other valve dimensions on request. Our sacks production allows to obtain the following linear dimensions of the bags:

▪ valve sacks length 450 – 910 mm;

▪ valve sacks width 350 – 600 mm;

▪ valve length 250 – 450 mm;

▪ valve width 90 – 130 mm (funnel);

We can produce valve sacks for product volume from 20 liters up to 80 liters. Especially for cement packing and other breathable products we can put micro perforation on the surface of the sacks. Also we can print any image of 6 color on the on the surface of the bags, according to the customers layout. In addition, we can produce polypropylene bags in any color, for that we add into the raw material - polypropylene granules - special dyes. To obtain high resistance ofpolypropylene fabric to direct sunlight we add UV stabilizer into the raw material. Minimal order of PP bags depends on its parameters and may contain 30 000 pieces per month.

Ad Star valve bags types

The product to be packed into the valve bags must have finely crystalline structure, so it can be pumped into the bag by turbine rotary doser. Other bulk materials, such as lump products or pellets, must be packed into the polypropylene bags with open mouth, which we also produce. We produce valve bags for packaging of the following types of bulk products:

▪ woven polypropylene valve bags (PP sacks / bags with valve) for cement packaging up to 80 liters;

▪ woven polypropylene valve bags (PP sacks / bags with valve) for primer packaging up to 80 liters;

▪ woven polypropylene valve bags (PP sacks / bags with valve) for construction dry mixes packaging;

▪ woven polypropylene valve bags (PP sacks / bags with valve) for dry mixes additives packaging;

▪ woven polypropylene valve bags (PP sacks / bags with valve) for milled salt packaging up to 80 liters;

▪ woven polypropylene valve bags (PP sacks / bags with valve) for gypsum packaging up to 80 liters;

▪ woven polypropylene valve bags (PP sacks / bags with valve) for soda packaging up to 80 liters;

▪ woven polypropylene valve bags (PP sacks / bags with valve) for concentrates (master batches) packaging;

▪ woven polypropylene valve bags (PP sacks / bags with valve) for calcium carbonate packaging up to 80 liters;

▪ woven polypropylene valve bags (PP sacks / bags with valve) for bulk building materials packaging;

Why Ad Star bags are better than paper bags for cement?

Paper bags for cement usually get wet or rupture. This happens because of the human factor, as well as a violation of technological standards during the production. Also paper bags for cement have low strength and therefore get rupture while handling and transportation. Torn paper bags for cement volume reach up to 5% of total sales volume of the manufacturer. If a buyer wants to purchase bagged dry mixes in Building Supermarket, picking up a paper bag, he will definitely get dirty. Then he will put paper valve bags for cement into his car and also smirch the interior. Of course, he will obtain negative attitude to the manufacturer.

Our polypropylene box type bags eliminate these problems. Polypropylene fabric, being the basis for woven valve bags for cement, due to the surface lamination does not rupture and does not get wet practically. Therefore, a buyer will not stain clothes nor spoil packaged material under the rain. Even if you nail Ad Star bag to the wall, tear in the polypropylene fabric will not continue to spread and the bag will not destroy. Quantity of Ad Star bags ruptures approaches zero, therefore the manufacturer will not incur losses due to spillage of the product while long-distance transportation and bags handling. Highest surface quality of our bags allows us to print image according to the customer layout in 6 colors without distortion. Ad Star polypropylene brick bags - is the perfect modern packing, which allows you to increase sales of your product!

• E-mail:tjwhoking@163.com

• QQ:490045876

• SKYPE:antonio87455

• WeChat:+86-13802155833

• WhatsApp:+ 86-13802155833

• Mobile Phone:+86-1380215583386-13802155833CELL:+86-13802155833

• 

• 

• 

• 

• 

•