HC-L006 Dental silent air compressor /oil free air compressor (1for 3) with competitive price

Features for HC-L006 Dental silent air compressor /oil free air compressor (1for 3) with competitive price:

SPECIFICATIONS

Air  Compressor

1.Usage operation announcements

   1.While using should will get empty to press the machine put on the neat ground, choosing possibly well ventilated good, the dust is small, small position in degree of humidity ,in order to spread hot good, sprit source cleanness dry.

   2. Connect the row spirit valve mouth to a lowest electric voltage for using spirit source equipments tube road, opening lining up spirit valve valve door can immediately starting providing to equipments spirit, being manometer instructioning pressure declining to the enactment dint, the pressure control shuts to match automatically, getting empty to press the machine to start afresh(the different from allest pressure value according to model number in value in lowest pressure all have set up before product a factory good, general circumstance bottom the customer do not want to adjust the initial value without authorization.

   3.The usage checks to get empty to press before the machine spirit road has on to the stop, the each a just like is often the phenomenon empress, putting the power cable plug to AC outlet top( the A C outlet must connect the ground is good)that meet the request, getting empty to press the machine electrical engineering to start starting namely, the electromagnetism valve acts, closing to line up the air road, whole machine begins to work.

   4. If the customer power supply electric voltage is low, did not attain the standard electric voltage value , can’t be strong to exercise to use, will damage to get empty to press the machine electrical engineering otherwise should another add the power supply the steady pressing the machine or adjust to press the machine , make an electric voltage for using attain the standard power supply electric voltage value.

   5. Use in the process, get empty to press the machine save to will condense a little amount humidity in spirit bottle, so want to periodically drain , a the sort drains every week, before draining turn off first the power supply , open to line up the spirit valve a row do to save spirit bottle air, then turn to open to save the spirit a bottom fill to block up, after drining, turn the using then afresh.

6. The manometer instructions the pressure goes up the tallest pressure of the enactment, the pressure controller breaks to open automatically, getting empty to press the machine Stop the work.

7. Use the process inside, because having the dust in the air, so enter the spirit do away with the orotund machine request to wash every week, before washing turn off first the power supply, will away with orotund machine turn the bottom, then turn the bottom cleans with the clear water, rebind the good using then.(also can rep;ace the new sea cotton)

2.Maintain with support

for insuring the safety, compressor work the hour strictlies forbid to touch on board any a piece.

this machine is for having no oil compressor, strictlying forbid to encourage the lubrication.

the environment temperature of this machine usage is 5°C~40°

wash absoluteness can’t to whole on board sprinkle water the application to softly the cloth wipe the clean and the above dust, being careful to knock and break a piece.

use to please cut off the power switch after completing.

3.Break down analysis

Get empty to press the machine electrical engineering such as can’t revolve, please check the compressor arrive the spirit road that save spirit bottle whether unimpeded, whether power switch open or not, power supply whether normal, plug whether the contact is good, Pressure switch whether damage, electromagnetism valve row whether spirit stop or not. If these are all normal, may be to get empty to press the machine oneself of breakdowns, such as can’t solve by oneself, please pass to sell the company and produce the factory house the contact maintain the affair.

Get empty to press the function the normal starting, but row empty the electromagnetism valve can’t close, hasing been lining up empty,the manometer instructions do not rise , please check the electromagnetism valve power cable with coil whether good, if get empty to press the machine work the electromagnetism valve can close, but the pressure controller hases broken to open, getting empty to press machine stop work, the electromagnetism valve continues to line up the spirit and invite the check single direction play king inside the valve with type rubber whether good, such as can’t solve by oneself, please pass to sell the company and produce the factory house the contact.

Because of air temperature over high, or indoors well ventilated not good, get empty to press the machine worked hot, the hot protection in inside in electrical engineering machine will break to open the power supply automatically, getting empty to press he machine stop working this is not break down, need the temperature lower, the hot protection machine will reply automatically, get empty the opportunity to press to start afresh, continue to work.

Get empty to press the machine work to tallest pressure of the enactment and still does not shut down, the hour of amount should turn off the power switch immediatety. check pressure controller . Start, continue to work.

Get empty to press the machine exceeds the enactment pressure 0.85 MPas still does not shut down, the this time safe valve should line up the spirit automatically such as can’ting line up the spirit automatically, should regulate the safe valve in order to rise safety, protective function.

Get empty to press the continuous work in machine, the term of the inside and normal usage management in a year is next, any result in can’t normal work because of manufacturing quantity problem, our company protects to fix fox the customer gratisly, External appearance and easy damage pieces do not belong to guarantee the scope.