Contact Platform Support
Help CenterASTM E595-15 Aerospace Space Environment Simulation Test Chamber Degassing Test
Related Products
-
ASTM E595-15 Outgassing TestNegotiableMOQ: 1 Piece -
ASTM E595-15 Outgassing TestUS$ 200 - 600MOQ: 1 Piece
-
ASTM E595-15 Outgassing TestUS$ 200 - 600MOQ: 1 Piece
-
Flame Retardant Board BSS 7238 Boeing Standard Yishuo Aircraft Material Combustion Smoke Density TestUS$ 200 - 600MOQ: 1 Piece
-
Flame Retardant Testing of Aircraft Materials BSS7239: Toxicity TestingUS$ 200 - 600MOQ: 1 Piece
ASTM E595 is a test of the degassing performance of materials used in special places such as aerospace and 5G. Any small venting or leakage of the spacecraft will create an additional acceleration.Changing the orbit and attitude of the spacecraft to comply with ASTM E595 can reduce the impact on sensitive environments.
With the rapid development of aerospace and 5G applications, the special space environment has put forward particularly strict requirements on the release characteristics of electronic components (air).Outgassing of materials and structures is a very common phenomenon in the vacuum environment of space, which has a great impact on the normal and stable operation of spacecraft and 5G station.ASTM E595 is one of the commonly used vent standards for evaluating molecular contamination.
ASTM E595-15 Outgassing test - Test Standard
ASTM E595 Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
ASTM E595-15 Outgassing test - Test Requirement
CVCM （collected volatile condensable materials）≤0.1%
TML （total mass loss）≤1%
WVR （the amount of water vapor regained）
Outgassing test ASTM E595 - Test Conditions
Pre Condition: 73 F/ 50% RH (24Hours) ; Post Condition: 73 F/ 50% RH (24Hours)
This test method describes the test apparatus and related operating procedures for evaluating the mass loss of materials being subjected to 125°C at less than 7*10−3 Pa for 24 h. The overall mass loss can be classified into noncondensables and condensables. The latter are characterized herein as being capable of condensing on a collector at a temperature of 25°C.
ASTM E595-15 Outgassing test – Brief
Many types of organic, polymeric, and inorganic materials can be tested. These include polymer potting compounds,foams, elastomers, films, tapes, insulations, shrink tubings,
adhesives, coatings, fabrics, tie cords, and lubricants. The materials may be tested in the “as-received” condition or prepared for test by various curing specifications.
More about Outgassing test ASTM E595,please contact us :
CASfire Technical Co.,Ltd
8F Building 4, Chinese Academy of Science,
No.255 South Duiying Road,Jimei, Xiamen 361021, China
Tel: (+86) 0592-3500085
MP: (+86) 18906059211
Email: info@casfire.cn
Website:
From JJ2022
Send Inquiry to This Supplier
You May Also Like
-
Fire Test Service to Railway VehiclesUS$ 200 - 600MOQ: 1 Piece
-
EN 15102 Decorative Wallcoverings -- Roll and Panel Form Products—CE CertificationUS$ 200 - 600MOQ: 1 Piece
-
EN 45545-2 Fire Protection of Railway Vehicles - Part 2US$ 200 - 600MOQ: 1 Piece
-
EN 45545-2:2020 Fire Protection on Railway VehiclesUS$ 200 - 600MOQ: 1 Piece
-
EN ISO 4589-2:Oxygen Index Test to Plastics MaterialUS$ 200 - 600MOQ: 1 Piece
-
FAR.25.853 Department of Transportation, Federal Aviation Administration Regulations for Compartment InteriorsUS$ 200 - 600MOQ: 1 Piece
-
About Fire Test to Upholstered Furniture and Textile ListUS$ 200 - 600MOQ: 1 Piece
-
Fire Testing to Aircraft Material-StandardsUS$ 200 - 600MOQ: 1 Piece
-
FMVSS 302 Flammability Test to Motor Vehicle Interior MaterialsUS$ 200 - 600MOQ: 1 Piece
-
GB 8410(Chinese Standard) Flammability Test to Motor VehicleUS$ 200 - 600MOQ: 1 Piece
