0.1 mm wire stainless steel 316 knitted wire mesh

Knitted wire mesh -mesh type

Technical data of knitted wire mesh

•A:It is the standard width of the mesh going out of the machine ,once flattened (flattened pipe)
•B:It is the maximum width the machine can deliver.
•C:It is the minimum width the machine can deliver.
•D:Number of machine needles.
•F:Mesh opening .Also included in the nominal width.Two mesh openings machines:
       The first :opening is that between two needles.
       The second:is that of the hole of the needle itself ,i.e,there is one opening of each altrnatively.
•G:Weight of 1linear m of flat mesh,in grammes,0.26 mm wire ,AISI 304 ,mesh at rest not drawn