Module spare parts TRICONEX 3301

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules / cards, controllers, touch screens, servo drivers.

Advantages: supply of imported original products, professional production parts,

Fast delivery, accurate delivery time,

The main brands include ABB Bailey, Ge / fuanc, Foxboro, Invensys Triconex, Bently, A-B Rockwell, Emerson, ovation, Motorola, xyvom, Honeywell, Rexroth, KUKA, Ni, Deif, Yokogawa, Woodward, Ryan, Schneider, Yaskawa, Moog, prosoft and other brands

This product meets the essential requirements of applicable European Directives, as amended for CE marking, as follows: • 73/23/EEC; Low-Voltage Directive (safety) • 89/336/EEC; Electromagnetic Compatibility Directive (EMC) Note Refer to the Declaration of Conformity (DoC) for this product for any additional regulatory compliance information. To obtain the DoC for this product, visit /certification, search by model number or product line, and click the appropriate link in the Certification column. Waste Electrical and Electronic Equipment (WEEE) EU Customers At the end of their life cycle, all products must be sent to a WEEE recycling center. For more information about WEEE recycling centers and National Instruments WEEE initiatives, visit /environment/weee.htm. © National Instruments Corporation B-1 SCXI-1141/1142/1143 User Manual B Removing the SCXI-1141/1142/1143 Module This appendix describes how to remove the SCXI-1141/1142/1143 module from an SCXI chassis and from MAX. Removing the SCXI-1141/1142/1143 Module from MAX To remove a module from MAX, complete the following steps after launching MAX: 1. Expand Devices and Interfaces to display the list of installed devices and interfaces. 2. Expand NI-DAQmx Devices to display the chassis. 3. Expand the appropriate chassis to display the installed modules. 4. Right-click the module or chassis you want to delete and click Delete. 5. You are presented with a confirmation window. Click Yes to continue deleting the module or chassis or No to cancel this action. Note Deleting the SCXI chassis deletes all modules in the chassis. All configuration information for these modules is also deleted. The SCXI chassis and/or SCXI module(s) should now be removed from the list of installed devices in MAX. Removing the SCXI-1141/1142/1143 Module from an SCXI Chassis Consult the documentation for the chassis and accessories for additional instructions and precautions. To remove the SCXI-1141/1142/1143 module from a chassis, complete the following steps while referring to Figure B-1: 1. Power off the chassis. Do not remove the SCXI-1141/1142/1143 module from a chassis that is powered on. Appendix B Removing the SCXI-1141/1142/1143 Module SCXI-1141/1142/1143 User Manual B-2 2. If the SCXI-1141/1142/1143 is the module cabled to the E/M Series DAQ device, disconnect the cable. 3. Remove any terminal block that connects to the SCXI-1141/1142/1143. 4. Rotate the thumbscrews that secure the SCXI-1141/1142/1143 to the chassis counterclockwise until they are loose, but do not completely remove the thumbscrews. 5. Remove the SCXI-1141/1142/1143 by pulling steadily on both thumbscrews until the module slides completely out.