Home > Products > continuous casting > Mould Oscillation and Deflection Detection Instrument
Mould Oscillation and Deflection Detection Instrument
- 5000 Piece / Pieces per Month
- Shenzhen
- T/T Credit Card PayPal
- Sand Water Filter/Water treatment plants
- Automatic Doypack Seal Machine (insert and sealing machine)
- IPX3/IPX4 Hand-held Water Spray Nozzle Test Device IEC 60529
- IPX5,IPX6 Jet Nozzle of IEC 60529, Brass material
- Adjustable and multifunctional Spring Impact Hammer IK01-IK07 Level Tester
- Test probe 43 IEC 61032-Probe 43-Figure 17 Jusdtest
Product Details
Brand Name: | ZFY | Place of Origin: | China |
Product Description
Mould Oscillation and Deflection Detection Instrument
Overview
The mold is a device that shapes the cast product in continuous steel casting, and it is also the core equipment and key technology of continuous casting machine. The main function of the mould oscillation deflection detection instrument is to detect the the mould oscillation table’s oscillation frequency, amplitude, deflection rate, phase, oscillation trajectory curve, etc. Through the detection and adjustment of the detection instrument, the mold moves along the outer arc of the continuous casting machine according to the given amplitude, frequency and waveform deflection characteristics.
The actual oscillation parameters of the mold oscillation table during the operation and production process and the process parameters of the cast products cannot be effectively known without the data detection of the mold deflection detection instrument, so that the operator cannot adjust the mould’s production process parameters in real time according to the real-time situation of the on-site production.
The continuous casting mold deflection detection instrument independently developed by our company is suitable for various molds such as slab, square billet, round billet and shaped billet. The system obtains the process parameters such as actual oscillation holographic parameters and negative slip amount of the oscillation table by effectively detecting the movement of the mold. The technicians can formulate the control strategy of the mould according to these actual parameters, and improve the output and quality of the product within a safe and reliable range.
The structure of the instrument
Continuous casting mold oscillation and deflection detection instrument is mainly composed of sensor system, sensor signal conditioning circuit, power supply circuit, synchronous data acquisition module, communication cable, and software data analysis system.
There are three axial acceleration sensors installed in the mold oscillation and deflection detection instrument, one of which is to detect the vertical oscillation signal (Y axis), and the other two are to detect the horizontal oscillation signal (X and Z axis). The signal obtained by the sensor is processed by the preprocessor and the preprocessing module. The oscillation signal and sensor status signal will be filtered and normalized, sent to the synchronous data collector for digitization and feature extraction, and the data is analyzed and processed by the master computer software to obtain various oscillation parameters and process parameters required by users.
The functions of the system
1. Adopting mould oscillation X/Y/Z three-dimensional data acquisition, using high-precision sensor system and high-sensitivity axial accelerometer, comprehensive detection of equipment oscillation state, including:
1) Detect the oscillation frequency of the mold oscillation table
2) Detect the amplitude of the mold oscillation table
3) Detect the deflection rate of oscillation
4) Detect the lateral deflection, longitudinal deflection, phase, and phase difference of the mold oscillation table
5) Three-dimensional display of the oscillation trajectory, and the oscillation table trajectory can be viewed from all sides of the oscillation table 6 (X-Y, X-Z, Z-Y)
2. The software system adopts the design of man-machine interactive graphic interface, which can display the mold oscillation state in real time. The software functions include:
1) Real-time data curve display: oscillation waveform, oscillation frequency, signal superposition analysis
2) Single-axis curve display, multi-axis curve display, amplitude, acceleration, three-dimensional graph
3) View historical curve
4) Generate test report
5) Give a warning prompt
6) Spectrum analysis function
7) Long-term storage of data
3. Portable measurement method, which can provide handheld detection equipment with wireless remote transmission, and the operation is simple.
4. Provide an overview of inspection parameters under the full screen, displaying all data including oscillation parameters and process parameters. At the same time, the calculation and display of the oscillation spectrum is completed in real time, which is used to evaluate the waveform distortion of the entire oscillation table, and to determine whether there is a problem with the installation of the oscillation device.
5. Alarm management. Record each alarm data under real-time alarm conditions to analyze the cause of the alarm and evaluate the impact of the alarm on production.
6. Parameter setting. Users can set the ideal oscillation value and normal working range of various steels online. We also can set the alarm limit, and the storage time of the database etc.
7. After charging the device once, it can work continuously for more than four hours.
8. Integrate embedded processing equipment to realize data collection, display, analysis, reporting and other functions.
9. According to the mold characteristics and user requirements, it can be flexibly configured, wich is suitable for all types of molds such as square billets, slabs, round billets and other mold oscillation tables.
10. Support wired and wireless data transmission functions, easy to use.
11. Use the laptop to receive the collected data, can be used for the operation test on site, and can analyze and process the data conveniently.
The features of the system
1. The actual oscillation state replaces the ideal oscillation state. The actual oscillation state of the table is used to formulate a control strategy, so that the oscillation table can be used to produce products with more accurate oscillation.
2. Convenient detection method. The equipment can be used for on-site inspection at any time, and the production site can grasp the operating status of the on-site equipment in time, so that we can make production adjustments to the equipment at any time.
3. Efficient working methods and processing platforms. The high-integration equipment developed by embedded technology can work in high temperature and harsh environment. This system can comprehensively detect XYZ three-axis data, and realize real-time data analysis and processing with high-speed data operation and processing platform.
4. Powerful database function. The database adopts the mode of computer automatic management and operator's manual assistance management, and there are tables for recording historical data and alarm data and working parameter setting table of monitoring system inside the database. By adjusting the output range, the best output effect can be obtained.
Wuhan CenterRise M&C Engineering CO., Ltd.
more info, please contact zero zero eight six one three nine nine five five eight eight five nine seven
Contact Us
- Wuhan CenterRise M&C Engineering CO., Ltd.
continuous casting | steel rolling |
- IEC61032-Probe 41-Figure 16 Test probe 41
- IEC61032-Probe 32-Figure 15 Test probe 32
- Test probe 31 IEC61032-Probe 31-Figure 14
- Jointed Child Finger Probes IEC 61032-Probe 19-Figure 13 R 2.5±0.05 mm
- Test probe 18 of IEC 61032 R4.3mm Jointed Child Finger Probes
- Digital recorder for Lugeon testing
- MRU Subsea maring motion reference unit
- MRU maring motion reference unit
- eMRU motion reference unit
- IEC61032-Probe 14-Figure 10 Test probe 14
- Short Test Pin Probe IEC61032-Test Probe 13-Figure 9
- Long Test Pin Probe IEC61032-Probe 12-Figure 8 JSD-08
- IEC61032-Test Probe 11-Figure 7 Φ12mm IEC 60601
- IEC 61032:1997-test Probe 2-Figure 6 with handle
- IEC61032-Probe D-Figure 4 Test probe D 1mm diameter
- Test probe C IEC61032-Probe C-Figure 3 MODEL JSD-03
- IEC61032-Probe B-Figure 2 Test probe B IP2X test
- Test probe A IEC 61032-Probe A-Figure 1 JUSDATEST
- Test finger ISO 20957-1:2013 Figure 1
- JSD-K02 Test probe ABCD-Power supply Kit of IEC 61032:1997
- PRS10 Rubidium Oscillator
- HY-408 magnetic compass for naval
- The BX992 is a dual-antenna receiver enclosure with integrated inertial navigation system powered by the BD992-INS
- Trimble BD992 Dual-antenna single board solution for precise position and heading
Popular Searches
Find Similar Products By Category
- Measurement & Analysis Instruments > Other Measuring & Analysing Instruments
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-