EATON DPM-MC2

Brand:EATON

Type:DPM-MC2

Origin: the United States

Warranty: 365 days

Colour: new/used

Shipping method: Courier delivery

^{Spare parts spare parts, the main DCS control system of PLC system and the robot system spare parts,}

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

Create an Add-On Instruction file using ProSoft Configuration Builder (PCB) and export the Add-On Instruction to an Studio 5000 compatible file (.L5X file). 4 Import the Add-On Instruction (the .L5X file) into Studio 5000. The .L5X file contains the Add-On Instruction, user-defined data types, controller tags and ladder logic required to configure the MVI69E-MBS module. 2.1 Creating the Module in an Studio 5000 Project In an Studio 5000 project, there are two ways you can add the MVI69E-MBS module to the project.  You can use an Add-On Profile (AOP) from ProSoft Technology. The AOP contains all the configuration information needed to add the module to the project. This is the preferred way, but requires RSLogix version 15 or later. Refer to Creating a Module in the Project Using an Add-On Profile (page 15).  If using an AOP is not an option, you can manually create and configure the module using a generic 1769 profile. Use this method if you have RSLogix version 14 or earlier. Refer to Creating a Module in the Project Using a Generic 1769 Module Profile (page 19).

Creating a Module in the Project Using an Add-On Profile Installing an Add-On Profile Download the AOP file (MVI69x_RevX.X_AOP.zip) from the product webpage () onto your local hard drive and then extract the files from the zip archive. Make sure you have shut down Studio 5000 and RSLinx before you install the Add-On Profile (AOP). 1 Run the MPSetup.exe file to start the Setup Wizard. Follow the Setup Wizard to install the AOP.

Click FINISH when complete. The AOP is now installed in Studio 5000. You do not need to reboot the PC. Using an Add-On Profile 1 In Studio 5000, expand the I/O CONFIGURATION folder in the Project tree. Right-click the appropriate communications bus and, and then click NEW MODULE.