CP-E 24/1.25

Brand:ABB

Type:CP-E 24/1.25

Origin: the Swiss

Warranty: 365 days

Colour: new/used

Shipping method: Courier delivery

Spare parts spare parts, the main DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

Appendix D Directive Considerations Relevant products comply with EMC Directive EMCD 2004/108/EC and Low Voltage Directive LVD 2006/95/EC. The products are provided with a CE marking. Electro-Magnetic Compatibility (EMC) Modules mentioned in this document, for which the product or packing is CE marked, are tested and approved according to the following standards: • EN 61131-2 Product Standard, Programmable Controller - Industrial Environment • EN 61000-6-4 EMC – Generic Emission Standard, Part 4 – Industrial Environment • EN 61000-6-2 EMC – Generic Immunity Standard, Part 2 – Industrial Environment. Low-Voltage Directive (LVD) Modules mentioned in this manual, for which product or packing is CE marked, comply with the LVD where applicable. To fulfill the LVD for AC 800M and S800 I/O, the power supplies shall provide a secondary Safety Extra Low Voltage (SELV) or a Protected Extra Low Voltage (PELV). The power supplies described in this manual, SD82X and SD83X, fulfill these requirements, see Power Supply Units – Types SD821, SD822 and SD823 onIf you use other power supplies, except SD82X and SD83X, to provide the 24V d.c. for AC 800M it is required that they also are CE marked, Underwriters Laboratories (UL ) listed and fulfill the LVD (SELVandPELV) criteria. The AC 800M modules are IP20 semi-protected equipment and must be mounted in non-public localities.

The information below is applicable to products approved for hazardous locations according to CSA and/or UL standard UL60079-15 (2002). Hazardous Location Approval To comply with CSA and/or UL certification for use at hazardous locations, the following information is relevant for CSA and/or UL-certified ABB industrial control products. • Equipment labeled with reference to Class I, Zone 2, AEx nC IIC, hazardous locations is suitable for use in Class I, Zone 2, AEx nC IIC, or non-hazardous locations only.