HIMA F6705
- 120 Piece / Pieces per Month
- T/T
- 1 days
Product Details
Brand Name: | HIMA | Place of Origin: | China | Model Number: | F6705 |
Product Description
Brand:HIMA
Type:F6705
Origin: the United States
Warranty: 365 days
Colour: new/used
Shipping method: Courier delivery
Spare parts spare parts, the main DCS control system of PLC system and the robot system spare parts,
Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts
The CI871 unit is in the process of configuration. If the condition persist, and no other unit LED on the CEX-Bus is ON: • Check that a valid hardware configuration including the CI871 is downloaded to the controller. • Check the CEX-Bus fuse inside the PM8xx processor unit. • Initiate a reset signal (INIT) from the PM8xx processor unit. • Replace the CI871 unit. F(ault) LED is ON The CI871 unit is in the process of being restarted. Wait until the restart operation is complete. Replace unit if the condition persists. RxTx1/RxTx2 LED is OFF Reception and transmission of I/O data does not occur at the respective Ethernet channels. RxTx1/RxTx2 LED is flashing Reception and transmission of I/O data occurs normally at the respective Ethernet channels. PRIM is OFF The CI871 is not started by the application. PRIM is ON The CI871 is started by the application. DUAL is OFF Default, as no redundancy is supported with PROFINET IO.
Possible Causes, and Corrective Actions (for faults) Both R(un) and F(ault) LED's are OFF Possible Cause 1: The CI872 module is connected to the controller and the configuration is not downloaded to the controller for that position. Corrective Action 1: Ensure that the CI872 module is configured in the Hardware Tree (in the Control Builder) for that position, and that the configuration is downloaded to controller. Possible Cause 2: The CI872 module is just powered up or it is being configured and downloaded. Corrective Action 2: Allow time for the module to initialize. Corrective Action 3: If the indication persists after performing the corrective actions 1 and 2, then one of the following corrective actions is recommended: • Remove and insert the CI872 module to the CEX-Bus and allow time for it to initialize. • If the CEX-Bus already contains other communication modules and all the LED's on those modules are OFF, or if this CI872 is the only module on the CEX-Bus, then check the CEX-Bus fuse inside the PM86x Processor Unit. Corrective Action 4: If the indication still persists after performing the corrective actions 1 to 3, replace the CI872 module.
Contact Us
- Temporal Ming sheng automation equipment co., LTD
- 6ES7223-1PL32-0XB0 SIMATIC S7-1200 SM 1223 digital input output modules PLC module
- Siemens plc 6ES7 321-1BH02-0AA0 SIMATIC S7-300 Digital input SM 321 6ES73211BH020AA0
- 6ES73211BH020AA0 simen plc S7-1200 I/O module 6ES7321-1BH02-0AA0
- Original ABB TU838 3BSE008572R1 module
- Original ABB 3BSE038415R1 AO810V2 Analog Output 8 ch I/O Modules
- ABB PROFIBUS module CI840A 3BSE041882R1 PROFIBUS DP-V1
- Servo high temperature vacuum hot press Electric cylinder high pressure and high precision vacuum press 450 degrees Celsius, 5 tons, 10 tons
- HAILUNDA GZC-TF21 15.6 inch screen vacuum laminating machine OCA optical glue vacuum pressing machine
- PIONEER MAGNETICS PM3398B-6-1-3-E 80026-172-24 Digital input I/O module
- EMERSON A6740 RELAY MODULE
- EMERSON A6410 Expansion monitoring module
- EMERSON A6210 Axis vibration monitoring card
- EMERSON A6220 monitor module
- EMERSON A6110 Low pressure differential regulator
- GE 369-HI-R-M-F-E-H-E Motor management relay
- VIBRO-METER VM600 RPS6U 200-582-600-013 SCR module
- VIBRO-METER VM600 RLC16 200-570-000-111 200-570-101-015 Relay card
- VIBRO-METER VM600 MPC4 200-510-071-113 200-510-111-034 MPC4 Mechanical Protection Card
- VIBRO-METER VM600 IOCN 200-566-000-112 200-566-101-013 IOCN Card
- VIBRO-METER VM600 IOCN 200-566-000-112 200-566-101-013 IOCN Card
- VIBRO-METER VM600 IOC16T 200-565-000-013 200-565-101-013 I/O module
- VIBRO-METER VM600 IOC4T 200-560-000-111 200-560-101-017 Vibration monitoring and protection system
- VIBRO-METER VM600 CPUM 200-595-067-114 Central processing unit module
- VIBRO-METER VM600 CMC16 200-530-025-014 200-530-111-013 Condition monitoring
Popular Searches
- lightning conductor
- Copper Lightning Rod
- earthing system
- transmission rod
- 11 kv lightning arrester
- Copper Clad Steel Ground Rod
- static eliminator
- anti static device
- lightning connector
- plasma tv lift
- mtl safety barrier
- copper earthing bar
- copper earthing rods
- electrical earth rod
- earthing material
- Clad Steel Ground Rod
Find Similar Products By Category
- Electrical Equipment & Supplies > Other Electrical Equipment
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-