Module Spare Parts 369-HI-R-M-0-0-0-E

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules / cards, controllers, touch screens, servo drivers.

Advantages: supply of imported original products, professional production parts,

Fast delivery, accurate delivery time,

The main brands include ABB Bailey, Ge / fuanc, Foxboro, Invensys Triconex, Bently, A-B Rockwell, Emerson, ovation, Motorola, xyvom, Honeywell, Rexroth, KUKA, Ni, Deif, Yokogawa, Woodward, Ryan, Schneider, Yaskawa, Moog, prosoft and other brands

369-HI-R-M-0-0-0-E

• The use of appropriate Safety shoes (Omega) safety gloves, safety glasses and protective clothing are recommended during equipment installation, maintenance and service of the equipment. • Failure to observe and follow the instructions provided in the equipment manual(s) could cause irreversible damage to the equipment and could lead to property damage, personal injury and/or death. • Before attempting to use the equipment, it is important that all danger and caution indicators are reviewed. • If the equipment is used in a manner not specified by the manufacturer or functions abnormally, proceed with caution. Otherwise, the protection provided by the equipment may be impaired and can result in impaired operation and injury. • Caution: Hazardous voltages can cause shock, burns or death. • Installation/service personnel must be familiar with general device test practices, electrical awareness and safety precautions must be followed. • Before performing visual inspections, tests, or periodic maintenance on this device or associated circuits, isolate or disconnect all hazardous live circuits and sources of electric power. • Failure to shut equipment off prior to removing the power connections could expose you to dangerous voltages causing injury or death. • All recommended equipment that should be grounded and must have a reliable and uncompromised grounding path for safety purposes, protection against electromagnetic interference and proper device operation. • Equipment grounds should be bonded together and connected to the facility’s main ground system for primary power. • Keep all ground leads as short as possible. • At all times, equipment ground terminal must be grounded during device operation and service. • In addition to the safety precautions mentioned all electrical connections made must respect the applicable local jurisdiction electrical code. • LED transmitters are classified as IEC 60825-1 Accessible Emission Limit (AEL) Class 1M. Class 1M devices are considered safe to the unaided eye. Do not view directly with optical instruments. • This product is rated to Class A emissions levels and is to be used in Utility, Substation Industrial environments. Not to be used near electronic devices rated for Class B levels. • This product requires an external disconnect to isolate the mains voltage supply. • Ensure that the protective earth (PE) terminal is suited with a recommended wire size of 10 awg minimum wire size. • CT’s must be shorted prior to working on CT circuits on the 369.