GH-2500T Automatic Film Packing Machine

GH-2500T Automatic Film Packing Machine

I.Main performance and characteristics:

The machine adopts a frame-type mechanism to connect the whole machine as a whole. The machine has high stability, and the heating part is a stainless steel heating tube, which is suitable for mass shrink packaging in industries such as flooring, sauna board, keel, and gypsum board. The whole set of actions is automatically controlled by PLC, which greatly reduces the work intensity and increases production efficiency. Adopting anti-sticking and temperature resistant alloy sealing knife, the sealing is firm and reliable,

and the sealing does not coke or smoke. The sealing knife belt is automatically protected, which effectively prevents accidental cutting of the package and guarantees the safety of the operator.

1. Automatic feeding, length can also be adjusted automatically by photoelectric combination. Equipped with induction motor, automatic film feeding.

2. Digital display thermostat, built-in PID function, the temperature of the sealing knife is extremely sensitive and accurate, and can be set at will, so there is no need to worry about inaccurate temperature injuring the product. The components are all imported, joint venture famous brands.

3. This machine uses a single piece of film to be automatically formed and packaged by a mold, and it is automatically sealed and cut.

II. Equipment surface and appearance treatment

1. The main body of the machine is standard color, or the color card provided by the customer;

2. The machine body is made of high-quality carbon steel + surface spray treatment;

3. Part of the material is SUS304 stainless steel.

III.Public works conditions

1. Air pressure 0.5-0.6MPa;

2. Factory voltage is 380V, variable voltage range is ±10%, frequency is 50Hz, variable range is ±5%;

3. All power sources must terminate at the same point of the equipment;

4. All DC point machines have their own;

5. The power and air sources are arranged as close as possible, concentrated at the back of the equipment, far away from the operation panel, and arranged in a place without interference.