1-5 Points Calibration pH EC ISE DO Temp Sensor Portable Multiparameter Water Quality Meter Price

Multi-parameter water quality meter is one meter with several measuring unit. It can measure simultaneously pH/pX, Ion concentration, ion electrode potential (mV) value, Condutive (conductivity, TDS, salinity), DO (concentration and saturation) and temperature, etc. 

It is suitable in the field of disease control, environmental protection, water quality analysis, biological agriculture, scientific research and higher education, etc.

Features For M510T portable multiparameter water quality meter

*Color High contrast LCD touchscreen, 4.3 inches.

* Intelligent operation system provides features including user management, calibration management, electrode management, method management, data management, Log Management and etc.

* Multi-reading feature allows auto-read, timed-read and continuous-read. 

* Automatic/Manual temperature compensation ensures accurate results.

* Auto-hold feature senses and locks the measurement endpoint.

* Data Storage 1000 sets for each parameter (GLP-compliant).

* Data analysis feature helps user review, compare and recalculate results.

* Support for USB communication.

* Auto-power off feature effectively extends the battery service life.

* Reset feature automatically resumes all settings back to factory default options.

* IP65 waterproof.

pH

* 1-8 points calibration with Standard Recognition.

* Selectable pH buffer groups, including USA, NIST, DIN, GB, MERK, JIS.

* User-defined pH buffer or buffer group is supported.

* Automatic electrode diagnosis with pH slope and offset display.

Ion

* 1-6 points calibration.

* Selectable measurement unit, including μg/L, mg/L, g/L, mmol/L, pX, ppm, etc.

* Multi-measurement modes are supported, including Direct Reading mode, Standard Addition mode, Sample Addition mode and GRAN mode.

* Over 10 methods are built-in, including F^-, Cl^-, Br^-, I^-, NO₃^-, BF₄^-, NH₄⁺, K⁺, Na⁺, Ca²⁺, Cu²⁺, Pb²⁺, Ag⁺ and etc., user-defined method is supported.

Conductivity

* 1-5 points calibration automatically recognizes the standard solutions.

* Settable parameters, including cell constant, reference temperature (5/10/15/18/20/25°C), temperature compensation coefficient and TDS factor.

* Temperature compensation type (none, linear, pure water).

DO

* Support for air-saturated water or zero oxygen calibration.

* Auto barometric pressure compensation

* Manual Salinity Factor Correction

* Selectable pressure unit, including kPa, mbar, Torr, Atm.

Benchtop Multiparameter Water Analyzer

	M600L Benchtop Multiparameter Water Analyzer
	Test Items: pH(-2.000 to 20.000pH); mV/ORP(-2000.00 to 2000.00mV); pX(-2.000 to 20.000pX); ISE(0 ~ 19990); Conductivity(0.000μS/cm-3000 mS/cm); Resistivity(5.00Ω·cm - 100.00 MΩ·cm); TDS(0.000mg/L - 1000g/L); Salinity(0.00~8.00%); DO(0.00 to 99.99 mg/L);  Saturation(0.0 to 600% ); Temperature(-5 to 130 ºC)
	Reading Mode: Auto Read (Fast, Medium, Slow), Timed, Continuous Data Storage: 1000 Groups

	M500T Benchtop Multiparameter Water Analyzer
	Test Items: pH(-2.000 to 20.000pH); mV/ORP(-2000.00 to 2000.00mV); pX(-2.000 to 20.000pX); ISE(1E-9 to 9.999E9); Conductivity(0.000μS/cm-2000 mS/cm); Resistivity(5.00Ω·cm - 100.00 MΩ·cm); TDS(0.000-1000ppt); Salinity(0.00~8.00%); DO(0.00 to 99.99 mg/L);  Saturation(0.0 to 600% ); Temperature(-10 to 135 ºC)
	Reading Mode: Auto Read (Fast, Medium, Slow), Timed, Continuous Data Storage: 1000 Groups

	M500T-A Benchtop Multiparameter Water Analyzer
	Test Items: pH(-2.000 to 20.000pH);  mV/ORP(-2000.00 to 2000.00mV); pX(-2.000 to 20.000pX); ISE(1E-9 to 9.999E9); Conductivity(0.000μS/cm-2000 mS/cm); Resistivity(5.00Ω·cm - 100.00 MΩ·cm); TDS(0.000-1000ppt); Salinity(0.00~8.00%); Temperature(-10 to 135 ºC)
	Reading Mode: Auto Read (Fast, Medium, Slow), Timed, Continuous Data Storage: 1000 Groups

	M300F Benchtop Multiparameter Water Analyzer
	Test Items: pH(-2.00 to 20.00pH); mV(-2000.0 to 2000.0mV); pX(-2.00 to 20.00pX); ISE(1E-9 to 9.999E9); Conductivity(0.000μS/cm-1000 mS/cm); Resistivity(5.00Ω·cm - 20.00 MΩ·cm); TDS(0.00mg/L-300g/L); Salinity(0.00~8.00%); DO(0.00 to 20.00 mg/L);  Saturation(0.0 to 200.0% ); Temperature(-5 to 110 ºC)
	Reading Mode: Auto Read (Fast, Medium, Slow), Timed, Continuous Data Storage: 500 Results Each

	M300F-A Benchtop Multiparameter Water Analyzer
	Test Items: pH(-2.00 to 20.00pH); mV(-2000.0 to 2000.0mV); pX(-2.00 to 20.00pX); ISE(1E-9 to 9.999E9); Conductivity(0.000μS/cm-1000mS/cm); Resistivity(5.00Ω·cm - 20.00MΩ·cm); TDS(0.00mg/L-300g/L); Salinity(0.00~8.00%); Temperature(-5 to 110 ºC)
	Reading Mode: Auto Read (Fast, Medium, Slow), Timed, Continuous Data Storage: 500 Results Each

 Portable Multiparameter Water Analyzer